Photoshop :: Error :: Could Not Print Because Of A Problem Writing The Print File
Feb 14, 2008
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
View 3 Replies
ADVERTISEMENT
Nov 16, 2011
I get "Fatal Error: Unhandled c000000dh Exception at 24079af3h" every time when I print to pdf with Acrobat 9 in AutoCAD 2012. However, the Acrobat converter is working properly in other applications. It only happens in ACad 2012.
View 1 Replies
View Related
Aug 23, 2011
When I am printing from AutoCAD LT 2012, I randomly get this error message every 10 to 15 drawings that I print. Considering that I print 10-15 drawings at one time, I am getting a fatal error every time I print a set. Why? I don't get this error when printing in AutoCAD 2011LT or 2012 Full Version.
View 1 Replies
View Related
Sep 30, 2013
We just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies
View Related
Jul 4, 2011
I have both ACad 2002 and 2012, (both 32-bit) installed. I have plenty of RAM.
I'm converting a .dwg file to a .pdf and plotting to the desktop to either send out the pdf file or print to myself.
My problem is that it takes "what seems like forever" to plot a .pdf file to the desktop using 2012.
My situation is:
1. In 2002, using the Adobe pdf driver it takes 6.7 seconds from the time I press plot until the pdf file appears on my desktop.
2. In 2012, using the same 2000 formated file opened in 2012 it takes 37 seconds for the file to appear on my desktop.
3. In 2012, using a .pc3 driver, the same file, qsaved and formatted to 2012 takes 34 seconds to appear on the desktop.
Acrobat was installed on my computer prior to ACad 2012 but I've uninstalled/reinstalled Acrobat and I get the same result as above.
Is there anyway to speed Acrobat up? I defrag'd, cleaned the registry but I get the same results.
View 9 Replies
View Related
Feb 20, 2014
I have a Samsung Laser printer. THe passive USB hub went bad yesterday, and I re-installed teh printer drivers. Everything prints fine from my on-line E-mail, Microsoft Word, etc. However, when I attempt to print from Adobe Illustrator I get a "Print to file" WINDOW that comes up, I never got this before I don't want to print to file (!!!!). I want to print to the printer.
View 3 Replies
View Related
May 23, 2012
When I try printing to an adobe pdf file I obtain the following error:-
%%[ ProductName: Distiller ]%%
%%[ Error: limitcheck; OffendingCommand: string ]%%
Stack:
67143
/mystring
24
120
22381
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
View 2 Replies
View Related
Oct 27, 2004
I have an HP Destjet 9650 printer and am using Acad 2005. I can generate aPLT file, but how do I print it?
View 7 Replies
View Related
Nov 1, 2012
I get a pop up of "Save Files To Folder", but no file names are present, so "save" does nothing. I have all the boxes checked in Print Job, e.g. print to Jpeg file. I have searched, re-read Kelby etc. and come up blank. I have a profile entered for a custom lab.
View 1 Replies
View Related
Nov 25, 2012
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies
View Related
Mar 8, 2014
I have Photoshop Elements 12. I can backup a catalog to my Mac, but not to an external drive. I have tried two different externals. Both work with my PC, but not the Mac. I created a new 1 photo catalog as a test. It will back up to the Mac, but not the external.
View 1 Replies
View Related
Feb 25, 2013
While trying to do a full backup to an external hard drive, I am getting a message "error encountered while writing file" after about 75% of the 14,000 photos. I believe I have traced the problem to a missing slide show presentation program that was on an external hard drive (F) I no longer have. The program still works (from the C drive), however if I click on the program thumbnail in the Organize screen (which points to the F drive), and try to delete it, I get a message "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media." I believe that is because it is looking for the program on the non-existent F drive. What can I do to enable a backup?
View 4 Replies
View Related
Sep 18, 2012
I am trying to move my catalog from a Windows xp computer to a new Windows 7 computer.In attempting to do so I an trying to make a backup of my catalog.When I attempt to make a full catalog backup I get an error message at the end of the writing of the backup file. The message is: "Error encountered while writing file."
The images are written to the backup file (> 20,000 images) and the Catalog.buc is written as well, but the Backup.tly is missing in the backup folder.I have gone thru my catalog and have found no unconnected files and no file that are in need of repair. Everything seems to be in order with the catalog.
View 2 Replies
View Related
Sep 3, 2010
I have a problem with After Effects CS 5 on Windows 7 64 bit.When I try to render out quicktime formats in After Effects I get an error message:
After Effects error: Rendering error while writing to file "E:/ . Unable to open file. (-1610153459)
Rendering to other drives, like C: or D: works fine but as soon as I try to render to the E partiton.I get this error.... It must have something to do with permissions on that partition.I don't want to reinstall windows.
View 23 Replies
View Related
Dec 26, 2013
When I try to export an image I get the error "An error occurred when writing the property "Revision number" to the file". The file still exports but I would like to get rid of this error.
View 5 Replies
View Related
Jan 16, 2009
So I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
View 4 Replies
View Related
Jun 27, 2013
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
View 13 Replies
View Related
Dec 5, 2012
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Operating system, CS5 suite and printer drivers all updated.
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
View 6 Replies
View Related
Jan 8, 2013
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies
View Related
Feb 26, 2013
I have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies
View Related
Oct 30, 2012
System specs:
MacPro3,1
2 x 2.8 GHz Quad-Core Intel Xeon
OS 10.6.8
18 GB RAM
NVIDIA GeForce 8800GT graphics card
Photoshop 12.1 x 64
So I just purchased and installed my first copy of an Adobe Suite and now I can't print. Back story: I had CS4 on my machine from my last job and it printed fine. When I lost my job, I went the legit route and installed the demo for CS 6 until I was able to aquire my own copy. CS 6 also printed fine.
I found a version on eBay of CS 5.5 and was eager to install. Yes, it is a full legit version with original disc and packaging; the seller even went so far as to have the liscence transfered over to me. I used the "AdobeCreativeSuiteCleanerTool" to remove all previous versions before doing a clean install of CS 5.5. Everything else in the suite seems to be running normally except printing.
I've looked on the forums and tried several of their suggestions to no avail:
1) I tried changing the "Color Handling" in the print options box.
2) I tired running it in 32 bit mode.
3) I tried fixing permissions.
4) I trashed my preferences and tried the Shift-Option-Command trick
5) I updated the Adobe software (no updates for Photoshop)
6) I reinstalled my printer drivers.
I just printed last night from CS 6 and now no luck today.
View 3 Replies
View Related
Jun 13, 2013
I get the error message when I try and print. I do custom printing for clients. I've tried turning off my computer and re-starting it, but that didn't work. Do I need to un-install CS5, and then re-install?
View 2 Replies
View Related
Apr 17, 2013
Using a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies
View Related
Apr 30, 2013
I keep getting message in cs3 "could not print (filename) due to program error!" why?
View 3 Replies
View Related
Sep 15, 2004
Getting a "Could not complete the Print command because of a disk error." (when trying to print in Adobe Photoshop 5.5, on a NT Workstation 4.0)
View 1 Replies
View Related
Nov 15, 2012
I am receiving error message 150:30 when I try to print a picture.
Says I must restart computer to fix problem but when I restart still get message.
View 1 Replies
View Related
May 22, 2013
unable to print in elements 9 due to program error
View 1 Replies
View Related
Apr 26, 2013
I use CS6 on a Mac pro os 10.8.3 & print to an Epson Pro 4900. If I print an image via LR4 print module the print comes out at 12 X18 in. Recently I have tried that same image via CS6 and the print comes out at 6 5/8 X 8 1/2 in.
In Print Settings in Printer Setup in the print module of CS6 stats "Super A3 / B 13 X 19 but the printed image dimensions are a little over half of that.The printer used to print normally in CS6 print file.
View 9 Replies
View Related
Jan 9, 2009
I've been using Photoshop CS3 for awhile and printing fine. I just updated my print driver (Epson 3800 to version 6.5) as well as my graphics driver (NVIDIA GeForce 8500 GT)at the same time. After rebooting I cannot click on the Print menu selection to print. IE: When I click on Menu the Print option is greyed and not selectable. Print as well as Page Setup, and Print One Copy are all greyed out (not selectable). I rolled back my graphic driver and rebooted and it still doesn't work. I then upgraded my driver again and it doesn't work. I've opened jpg's as well as psd files and no matter what file I open the Print menu's are greyed out. I can print from Word and other programs. I also reset my preferences (con-alt-shift) and still can't select print. I've done everything but uninstall. I'm hoping not to do that. My computer is on: Vista Ultimate 32 bit SP1, 4gb ram. In addition to updating the print driver and graphics driver I updated: Ultimate Extra Sounds, Group Policy Preference Client Side Extensions, Samsung CLP-310 Printer driver, and Microsoft Tinker.
View 4 Replies
View Related
Jan 12, 2011
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
View 2 Replies
View Related
Oct 14, 2011
I am having trouble printing to an HP Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
View 8 Replies
View Related
