Photoshop :: Getting An Error Message When Try To Print?
Jun 13, 2013
I get the error message when I try and print. I do custom printing for clients. I've tried turning off my computer and re-starting it, but that didn't work. Do I need to un-install CS5, and then re-install?
I am getting this message (/Library/Printers/EPSON/InkjetPrinter/Filter/pdftopdf.app/Contents/M acOS/pdftopdf failed) when trying to print through the LR4 print module to my Epson 3880
I am running OSX 10.7.3 and have just downloaded and installed Epson driver v8.64.
I have a Samsung Laser printer. THe passive USB hub went bad yesterday, and I re-installed teh printer drivers. Everything prints fine from my on-line E-mail, Microsoft Word, etc. However, when I attempt to print from Adobe Illustrator I get a "Print to file" WINDOW that comes up, I never got this before I don't want to print to file (!!!!). I want to print to the printer.
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
I tried to load CS4 onto my new i mac and I'm getting an error 6 message. What that means and what I can do about it? I can't find my original software discs so have copied the software from my old i mac via my external hard drive. Bridge loaded okay.
One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing. Please run the Photoshop installer and re-install Photoshop.
Is there a problem or is this just a bug in Photoshop? I don't have any problems other than the error message. The version is: 12.0.4x64.
I am running PS CS4 Win Vista.I have 3G RAM and have designated plenty of available space for scratch disks(298G on C:, 66G on J: and 231G on M:, the latter two being external HDs).
When I attempt to use some of the advanced features of CS 4, especially Content Aware Scaling, I get the insufficient RAM message every time without fail.
MY HD is regularly defragmented and I have purged, lowered the History states allowed, and cleaned out all temp files from IE.
Any deas how I can avoid the RAM message and use the features in CS4?
I have some raw files on a dvd that I have imported into bridge. They imported very small files and when I try to import them into cs3, I get an error message that says "cannot complete your request because of a program error". I've had other dvds that I have imported with no problem.
I'm getting this error message when I try to use photomerge. I'm using CS5, and this is the first time I'm trying to use photomerge. I've tried several different photos but I'm always getting this message.
I recently installed CS6 and since then I get an error message when I want to use text: "could not complete your request because something prevented the text engine from being initialized.Restarting CS6 doesn't work...
I keep receiving a error message when closing PS CS6 which says "Adobe Media Core CS6 has stopped working". What can I do to resolve this issue? I'm running Windows Vista professional.
I installed a new drive (OWC Accelsior SSD) via PCIe in my 2009 MacPro then loaded 10.9 on the new drive. While I have regret about 10.9 due to the Colorflow bug, I had already done the upgrade on the old drive and stayed with 10.9
I then ran Migration Assistant to copy everything to the new drive.In addition, I ran Verify Disk on both the old and new drives via the Disk Utility and all was OK.After the migration, CS6 13.0.0 will not allow me to open a file from any internal or external drive. When I select File, Open the error message states, "Could not complete your request because of a program error".
When I select File, Open 2-3 times, I am able to open a file but only from the Desktop. After trying 10 File, Opens, from the Desktop with sucess, I tried selecting an external drive and immediatly get the program error message againI tried selecting internal sata drives, an external Raid 5 connected via eSata and a drive connected via USB3 but all produced the same error message.
So I installed CC. Unfortunately the same exact problem occurs.I noticed when I was installing CC that there was an update to CS6 13.0.0. But when I tried to update via the iCloud installer and also the download from the Adobe site ,the update failed with this message, "Errors encountered during installation (U44M1P7) I have found an inconvenient workaround that might offer a clue in that I am able to open any file from any drive if I drag it over the icon in the dock. That works for both CS6 and CC.
I'm trying to print Photoshop file that is 740000 pixels wide on roll paper on an Epson 4800. The file is a large Photoshop file format. It was created in CS4. When I try to make the print command, I get an error message saying Photoshop cannot print files wider than 32000 pixels. (Which seems unlikely to me)
I can not seem to get a simple yes or no answer to whether what I'm trying to do is possible. Upgrade to CS5 suggested, but I get exactly the same error message on CS5. I don't want to drop the resolution to solve this.
I recently got this error message and did everything that that the adobe solutions page told me to do to no avail. I have two thousand pictures to process...does anyone have any suggestions as to how I can get my photoshop cs3 on Vista back up and running?
I have tried to get Photoshop CS4 to run but keep getting Photoshop has stopped working. In 64bit the error message is
Problem Event Name: BEX64 Application Name: Photoshop.exe Application Version: 11.0.0.0 Application Timestamp: 48d38aa7 Fault Module Name: StackHash_a1a9 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Offset: 0000000000000000 Exception Code: c0000005 Exception Data: 0000000000000008 OS Version: 6.0.6001.2.1.0.256.1 Locale ID: 2057 Additional Information 1: a1a9 Additional Information 2: 97adcf723889235ddc4cb6cacaa74283 Additional Information 3: 8a4c Additional Information 4: 9cfa5bc339a5d29061908def628328bc
in 32bit the error message is
Problem Event Name: APPCRASH Application Name: Photoshop.exe Application Version: 11.0.0.0 Application Timestamp: 48d3882e Fault Module Name: StackHash_fd00 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Code: c0000005 Exception Offset: 00000000 OS Version: 6.0.6001.2.1.0.256.1 Locale ID: 2057 Additional Information 1: fd00 Additional Information 2: ea6f5fe8924aaa756324d57f87834160 Additional Information 3: fd00 Additional Information 4: ea6f5fe8924aaa756324d57f87834160
I have uninstalled/reinstalled Photoshop and deleted the preference files to no avail. I have also used Adobe CS4 Clean Script along with Microsoft Windows Installer CleanUp Utility to no avail.
I have installed Photoshop CS3 which seems to work except when I try to access the preference files when it crashes. My system spec is OS Vista Ultimate x64 SP1 CPU Intel Core 2 Quad Q660 2.40GHz Motherboard Asus P5QL-E Memory 8 Gbt Graphics Card Asus EAH 4850
I have intalled Adobe Photoshp cs4, but i cant' open it. When i try to open it, there's a messare error likie this : " The instruction ox2o7444e2 --> oxoooooooo " what's wrong with my installation ? And how to resolve this problem ?