I have a Samsung Laser printer. THe passive USB hub went bad yesterday, and I re-installed teh printer drivers. Everything prints fine from my on-line E-mail, Microsoft Word, etc. However, when I attempt to print from Adobe Illustrator I get a "Print to file" WINDOW that comes up, I never got this before I don't want to print to file (!!!!). I want to print to the printer.
View 3 Replies
How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies View RelatedWe just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies View RelatedI have both ACad 2002 and 2012, (both 32-bit) installed. I have plenty of RAM.
I'm converting a .dwg file to a .pdf and plotting to the desktop to either send out the pdf file or print to myself.
My problem is that it takes "what seems like forever" to plot a .pdf file to the desktop using 2012.
My situation is:
1. In 2002, using the Adobe pdf driver it takes 6.7 seconds from the time I press plot until the pdf file appears on my desktop.
2. In 2012, using the same 2000 formated file opened in 2012 it takes 37 seconds for the file to appear on my desktop.
3. In 2012, using a .pc3 driver, the same file, qsaved and formatted to 2012 takes 34 seconds to appear on the desktop.
Acrobat was installed on my computer prior to ACad 2012 but I've uninstalled/reinstalled Acrobat and I get the same result as above.
Is there anyway to speed Acrobat up? I defrag'd, cleaned the registry but I get the same results.
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
My company is exporting Postcards in Illustrator CS6. What we do is have a large data set imported into the Variables applet and use the Actions applet to record and export action and play it through the whole data set. We later combine the PDF files and print them as a batch.
My question is: Is there a way to create an action that will automatically print the data set while avoiding the print dialog box? It will make the process simple and move faster.
Also, what are your was of creating postcards? Catalogs?
How do people create a catalog with over 60 pages and keep the file size low?
I have an HP Destjet 9650 printer and am using Acad 2005. I can generate aPLT file, but how do I print it?
View 7 Replies View RelatedI get a pop up of "Save Files To Folder", but no file names are present, so "save" does nothing. I have all the boxes checked in Print Job, e.g. print to Jpeg file. I have searched, re-read Kelby etc. and come up blank. I have a profile entered for a custom lab.
View 1 Replies View RelatedIn LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedTried to Save As - Adobe PDF in the hopes that I can email that file to printer or others to view. Comes up blank.
View 6 Replies View RelatedI have an AI CS6 file (CMYK) which I can not print in color. When I save as a PDF file and print it using Reader it prints out in color. My other AI files print in color without a problem.
View 1 Replies View RelatedI get the error message when I try and print. I do custom printing for clients. I've tried turning off my computer and re-starting it, but that didn't work. Do I need to un-install CS5, and then re-install?
View 2 Replies View RelatedI am getting this message (/Library/Printers/EPSON/InkjetPrinter/Filter/pdftopdf.app/Contents/M acOS/pdftopdf failed) when trying to print through the LR4 print module to my Epson 3880
I am running OSX 10.7.3 and have just downloaded and installed Epson driver v8.64.
Using CS5 windows won't print all the graphics of the file, even to a PS printer. Some of the graphics don't print at all and some print in a reverse color.
View 5 Replies View RelatedI'm trying to print color separations as a Postscript file from Illustrator CS5 and the halftone areas keep showing up as grayscale instead of the specified frequency and angle. I've tried usiing multiple PPDs and options but I'm having no luck.
View 15 Replies View RelatedA client has asked for an advert to be reset for magazine publication. For various reasons I am preparing it in Illustrator CC (mainly that I am more comfortable with Illustrator and it contains some reasonably complex effects and blending options). Anyway the time has come to send it to the printers and I have that heavy feeling that all is not well! The Publisher is asking for a PDF
There are two gradients within the artwork, the entire background is a photograph blending into a Black gradient (the body text sits in white over the black). To get the right effect the black gradient overlay has blending option - Multiply on it and being concerned it may not print propery or have transparency issues I chickened out and justt created one whole background image in PS (photo, gradient and all) and just imported it as a single jpeg back into Illustrator (ensuring I was working in CMYK).
But there is also an outer glow and drop shadow on some white text that sits over the Photograph. Do I need to flatten the image manually before creating the PDF? Or does the creation of the PDF do this for you? When I manually do this it displays correctly providing I tick Preserve Alpha transparency.
I work in Illustrator CC, the publisher has asked for Pass4Press Ver 9, but this preset is for Illustrator CS3. Are there no updates? and indeed does it really matter?
I am saving an adobe illustrator file as a jpeg for print at a photo center. When I export to save with a 300ppi, the photo center (Target) doesn't recognize the jpeg file. When I save for web, the photo center recognizes the file, but it prints very low quality (pixelized). Both jpegs are being saved at high quality.
View 12 Replies View RelatedI'm working on a double sided business card and I would like to know how to set up the file in Illustrator.
View 3 Replies View RelatedI can't open a new Illustrator file. It sends me this error: Can't create a new illustration. Problems occurred while saving the print file.I opened a previous document created in CC, but it will not allow me to copy and paste items from one doc to another. I have rebooted with no avail.
View 5 Replies View RelatedI am getting horizontal white lines one inch apart when I print an Ai file
View 13 Replies View RelatedContinue to receive error message when trying to print. What is the problem? I have updated the latest Service Pack.
View 12 Replies View RelatedI am receiving error message 150:30 when I try to print a picture.
Says I must restart computer to fix problem but when I restart still get message.
I am working with AC 2012 LT on a Windows 7 x64 system and printing to an HP Laserjet 5200tn connected by USB. The issue that we are having is when we try to print a secion of a drawing. Under the printer properties, portrait is selected and the layout window shows a portrait orientation. However, when we preview or print, the results are in landscape orientation. I've gone over the printer settings a few times, updated the driver, and tested that other programs on the same computer don't have the same issue.
View 2 Replies View RelatedI am looking for a function to print out the entire entity list of the selected entity...
so... walking down through the entity data... print out what it finds... any time it encounters an entity name... then do an entget and print that out too.
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
I am having trouble printing to an HP Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
So I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
I have a drawing where some lines have a 60% screening in there Plot Style. The print great from AutoCAD. But when I create a PDF and then print the PDF the Screened lines show up kind of blue / purple.
I am plotting to a Cannon iPF720 on 22x34 paper from Acrobat Reader X. I'm creating the PDF from AutoCAD 2012.
I get "Fatal Error: Unhandled c000000dh Exception at 24079af3h" every time when I print to pdf with Acrobat 9 in AutoCAD 2012. However, the Acrobat converter is working properly in other applications. It only happens in ACad 2012.
View 1 Replies View Related
