AutoCAD Print / Plot :: Acrobat Standard X Processing Very Slowly To Print Desktop File

Jul 4, 2011

I have both ACad 2002 and 2012, (both 32-bit) installed. I have plenty of RAM.

I'm converting a .dwg file to a .pdf and plotting to the desktop to either send out the pdf file or print to myself.

My problem is that it takes "what seems like forever" to plot a .pdf file to the desktop using 2012.

My situation is:

1. In 2002, using the Adobe pdf driver it takes 6.7 seconds from the time I press plot until the pdf file appears on my desktop.

2. In 2012, using the same 2000 formated file opened in 2012 it takes 37 seconds for the file to appear on my desktop.

3. In 2012, using a .pc3 driver, the same file, qsaved and formatted to 2012 takes 34 seconds to appear on the desktop.

Acrobat was installed on my computer prior to ACad 2012 but I've uninstalled/reinstalled Acrobat and I get the same result as above.

Is there anyway to speed Acrobat up? I defrag'd, cleaned the registry but I get the same results.

View 9 Replies


ADVERTISEMENT

AutoCAD Print / Plot :: Fatal Error When Print To Acrobat Converter

Nov 16, 2011

I get "Fatal Error: Unhandled c000000dh Exception at 24079af3h" every time when I print to pdf with Acrobat 9 in AutoCAD 2012. However, the Acrobat converter is working properly in other applications. It only happens in ACad 2012.

View 1 Replies View Related

AutoCAD Print / Plot :: HP Designjet 1055cm And Acrobat X - Cannot Change Page Size

Mar 15, 2011

Printing pdf's to an HP Designjet 1055 using the new Acrobat X version. I can't change the page size from 8.5x11and nothing comes out at the 1055. Works fine to our Xerox 6204 printers. Looks like I could be going back to Acrobat 9.4...

View 3 Replies View Related

AutoCAD Print / Plot :: DWG To PDF Batch Print To Single Sheet File

Sep 30, 2013

We just started in 2014 last week.  When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?

View 9 Replies View Related

AutoCAD Print / Plot :: How To Get Standard Sheet Sizes In PDF When Plotting

Oct 25, 2011

when I select the printer/name: Adobe PDF

under Paper size: the standard Arch sizes are not there...

2013 Civil 3D

View 6 Replies View Related

AutoCAD Print / Plot :: How To Print A PLT File

Oct 27, 2004

I have an HP Destjet 9650 printer and am using Acad 2005. I can generate aPLT file, but how do I print it?

View 7 Replies View Related

AutoCAD Print / Plot :: Print / Plot Preview Shows Section Of Drawing

Jan 20, 2012

I'm using autocad 2000 and I have a problem printing & plotting.  The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.

View 3 Replies View Related

AutoCAD Print / Plot :: 2004 - Set To Plot To File / How To Change

Aug 14, 2012

2004 and how to turn "plot to file" off?  Any time they go to plot the plot to file is already set and grayed out.  It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.

View 2 Replies View Related

AutoCAD Print / Plot :: Pixelated Plot Of PDF In File When Printing To PDF

Apr 8, 2010

I am plotting a file that has a pdf referenced into it. The quality of the plot is degraded only at the inserted pdf. The rest of the AutoCAD file looks fine. The inserted pdf is a printed AutoCAD file which looks clear and even has embedded layers and linework I can snap to (which seems to indicate that there is vector information present when it is in Autocad.

I have attached an image with 4 zoomed-in screen shots to show what I'm describing.

View 6 Replies View Related

AutoCAD Print / Plot :: Plot And Publish Log File

Aug 7, 2013

How to turn plot and publish log file off? (see attached pic)

I found out how to turn the one off under plot stamp settings, but I would like this box to be unchecked also and I want to do it automatically for all my users.

[URL]....

Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760

View 6 Replies View Related

AutoCAD Print / Plot :: Printing In 3D - Some Solid Items Print With Wire Frame

Jan 12, 2011

When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame.  This usualy happens with torus and cones.  How do I stop this?

In the example look at the U-bolt.

View 2 Replies View Related

AutoCAD Print / Plot :: Can't Print To HP Designjet T770 From 2012 On Windows 7 Machine

Oct 14, 2011

I am having trouble printing to an HP Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.

I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.

When I try to print, it looks like it is sending it normally, but the printer just ignores it.

I am able to print to this printer from AutoCad 2010 on a Vista computer.

View 8 Replies View Related

AutoCAD Print / Plot :: How To Print Multiple Layout Pages In A Printer

Oct 14, 2012

I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?

Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.

Publish does saving in DWF, PDF... But does not print in the printer.

View 3 Replies View Related

AutoCAD Print / Plot :: Screened Lines In PDF Print Blue / Purple?

Jul 14, 2011

I have a drawing where some lines have a 60% screening in there Plot Style.  The print great from AutoCAD.  But when I create a PDF and then print the PDF the Screened lines show up kind of blue / purple.

I am plotting to a Cannon iPF720 on 22x34 paper from Acrobat Reader X.  I'm creating the PDF from AutoCAD 2012.

View 1 Replies View Related

AutoCAD Print / Plot :: Same Line Weights On Different Layers Print Out At Different Scales?

Aug 1, 2013

I have two layers. One is set to red color, the other to blue color (using ctb). I have both layers defaulted to 1 mm line weight thickness. Blue is continuous and Red is dashed. 

When printing the blue layer prints at the correct weight of 1mm, while the dashed red layer prints at a much smaller thickness. All line properties are set to default or bylayer (this is not being caused by the lines having individual special properties).

View 3 Replies View Related

AutoCAD Print / Plot :: Cannot Print Imported Images - Large Bitmap

Sep 7, 2012

I work in AutoCAD 2010.

(AMD 64 X2 4200+, 2Gb RAM, C: 7Gb free, D: 17 Gb free)

I can not print imported images (JPG or TIFF) large size 80 - 260 Mb.

Print all but the raster! I tried to print on a plotter in JPG, TIFF, in whole or in parts, useless.

If I export the whole project in JPG 2000x3000 pix, all right, but I have 9000x10000 pixels - that size is not exported.

View 1 Replies View Related

AutoCAD Print / Plot :: Randomly Get Fatal Error Every 10 To 15 Drawings That Print?

Aug 23, 2011

When I am printing from AutoCAD LT 2012, I randomly get this error message every 10 to 15 drawings that I print. Considering that I print 10-15 drawings at one time, I am getting a fatal error every time I print a set. Why? I don't get this error when printing in AutoCAD 2011LT or 2012 Full Version.

View 1 Replies View Related

AutoCAD Print / Plot :: Xref Title Block Will Not Print In Color Windows 7 64bit

Feb 3, 2012

I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white.  If i open just the title block and print it, it will then print in color.  I only seem to have this problem when the title block is xref'd in.  I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.

View 8 Replies View Related

AutoCAD Print / Plot :: Change Print Limits Of A Layout

Sep 12, 2012

I’ve done it before in the past so I know its possible but I have forgotten how. See the attached image I would like to change the printable area of my paper space layout.

View 5 Replies View Related

AutoCAD Print / Plot :: Print Preview Thick Lines?

Jan 8, 2014

I received an Autocad file from another person, opened it with Autocad 2011 LT, and it looks fine. But when I go to print preview all the lines are very thick, making the detail of the drawing difficult to see. I've tried manually changing the lineweights but it has no effect on some of the layers. Is there an easier way to fix this other than recreating layers?

View 1 Replies View Related

AutoCAD Print / Plot :: Can't Print Something In Real World Inches

Aug 3, 2013

im trying to make a simple rectangle thats 9" long and 1/2 " high. and when i set it up in autocad it will not print out that size not sure if im doing something wrong in the units settings or in the plot. farly new to the auto cad program 

View 4 Replies View Related

AutoCAD Print / Plot :: Fill Hatch Won't Print As Solid

Jan 10, 2014

I am trying to create logo's as blocks to insert into title blocks efficiently. I made the outline of the first logo and hatched it as a solid hoping it would print as a flat black but it is showing up as streaky, almost as if I used a different hatch at an extremely small scale. I don't think it is a printer issue because even when printed to .pdf format it still shows up as streaky.

View 1 Replies View Related

AutoCAD Print / Plot :: Batch Print With Excel

Dec 11, 2012

Here are my current steps for getting prints to shop floor;

1. download a list of drawings required from as/400 into Excel.
2. saveas .csv file
3. print mfg labels using label program reading .csv file
4. using labels, open .dwg from ACAD one at a time and print ea
5. apply labels to prints
6. give to mfg

I want to do this;

1. download a list of drawings required from as/400 into Excel
2. run macro to concanteate file location, name and .dwg to new column
3. run macro to print each drawing either from Excel or Acad - not sure which is better;

 - Each drawing will have all label data incorporated in the drawing
 - currently nothing is in the drawing for label data, I'll need to create it.
 - should I insert a block that updates with the excel row data

4. give to mfg

My first goal is to be able to batch print with the same list that I use to create the labels, then I'll focus on getting the label data incorporated on the drawing.

View 2 Replies View Related

AutoCAD Print / Plot :: Generic Print Areas

Apr 25, 2012

We have 15 offices worldwide using AutoCAD with a Standard Template for ISO papersizes (A0, A1, A2, A3 & A4) however we have different printers/plotters in different offices.

Any generic print area that i can set the blocks too? if i set the print area for the OCE plotters they do not suit the HP Designjets etc.

Same issue when printing to pdf.

I need a suitable print area for All ISO sheet sizes that will work with any plotter/printer & pdf driver.

View 2 Replies View Related

AutoCAD Print / Plot :: Print To Plotter Or Make PDF

Mar 8, 2011

I have a new machine with windows 7 64 bit and autocad 11. When I choose the 6204 as my plotter I get the following message : "This plotter configuration cannot be used for one of these reasons: the driver cannot be found, the device cannot be found, or the driver has a problem. The None plot device has been substituted." it does not matter if I choose to try and print to the plotter or make a PDF this error comes. up..

View 8 Replies View Related

AutoCAD Print / Plot :: Print To A PDF With Black Background

May 20, 2011

Is there any way to print to a PDF and have the background remain black? I know how to make the colors stick for the objects but colors like yellow and cyan are hard to see on a white background.

View 4 Replies View Related

AutoCAD Print / Plot :: Cannot Print In Color HP T2300

Jul 10, 2013

Just upgraded from an HP DesignJet 800PS to an HP DesignJet T2300PS. Everything is printing BW, not color. Using AutoCAD 2013 and acad.ctb plot style.

View 8 Replies View Related

AutoCAD Print / Plot :: Create A PDF File

Oct 15, 2011

Whenever I create a PDF file the capital Ms and Ws get "spikey", if that makes sense.  I use the simplex font primarily.  I have C3D 2012, but this issue has been present back to LD 2009, and maybe farther.  Only happens when I make PDFs, not other formats.

View 1 Replies View Related

AutoCAD Print / Plot :: CTB File For Different Scale?

Jun 24, 2013

Could we can use 1 ctb file for all drawing scale? The problem is the lineweight at 1:100 is OK but at 1:5 it is quite light.

Could we use scale lineweght?

View 1 Replies View Related

AutoCAD Architecture :: Unable To Print / Plot DWG File?

Jan 23, 2013

I am new to  autocad, I downloaded autocad 2013, When I tried to print/plot it always blank(white), Is there any settings I need to for print/plot?

View 1 Replies View Related

AutoCAD Print / Plot :: Dot Hatch Disappearing From PLT File

Jul 25, 2011

Recently upgrade to ACad 2012 from 2002 and have a Designjet 500 at my office and am having trougble with a dot hatch in .plt files being sent to my printshop.At my office, I'm using a Designjet.pc3 file for both the 2002 and 2012 dwg files and they plot identically, no problem.

In creating a .plt file using a 750c.pc3 file for both 2002 and 2012 files for my printshop, the plt file for 2002 plots fine but the plt file for 2012 omits the dot hatch. Other hatches on both drawing plot fine. In print preview in both ACads both files show the dot hatch. I'm using ABviewer to check the hatch problem so I don't have to keep bothering my printshop about this. With the 2002 plt file it looks fine but in the 2012 plt file the dot hatch is missing. ABviewer shows results consistant w/ my printshop.

Am using identical pc3 files and identical CTB files. This problem goes across all my drawings....all hatches work between 02 and 12 except the dot hatch. All drawings were qsaved into 2012 from 2002 when I ungraded cads.

I have created a new 750c.pc3 file and the problem is found in that as well.Attached are just small samples of the problem showing 2002 and 2012 examples.I can only believe I am missing a setting somewhere in 2012 or there is a problem between 2012 and the 750c print driver.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved