I am trying to create logo's as blocks to insert into title blocks efficiently. I made the outline of the first logo and hatched it as a solid hoping it would print as a flat black but it is showing up as streaky, almost as if I used a different hatch at an extremely small scale. I don't think it is a printer issue because even when printed to .pdf format it still shows up as streaky.
View 1 RepliesBecause of the problems with wipeouts, I have switched to using some solid hatch set to colour 255. The hatch is in paperspace, sitting under titleblock and other Layout text. I am plotting to an HP1050C, using a .ctb file with 255 set with grayscale off.
The plot preview is fine, but the hatch blocks come out black on paper. I thought this was the problem with wipeouts, and that hatch didn't suffer from it.
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
Can't plot correctly to pdf with transparency hatch. I have several draws with hatch transparency, but when plot do pdf and use dwg to pdf.plot the hatch it´s wrong. See the draws in attachments.
I try to plot to dwf and after plot to pdf use a third part plot pdf like pdf995, arcplot, and others, but the problem its the same.
I use autocad 2012 but the problem it´s the same if I change to 2013 or 2014.
We have two Xerox 6204 Wide Format plotters, one in my office and one in another. When I plot the wipeouts (w/in blocks on layer 0, color 255 which is set to 0 screening) it plots as it should.
When the same file plotted with the same *.ctb file in the other office the Xerox plots same wipeouts come out completely black. (The LaserJet prints are not effected).
I have a Hatch in my drawing with Pattern as Solid on the top of an image. I made it transparent and it looks really nice in my screen, but as soon as I print either in PDF or hard copy the transparency feature disappear. How is possible to print my Hatch -with Solid as Pattern- with the transparency active either in PDF and hard copy?
View 3 Replies View RelatedThere's a transparency box you can check when you go to print.
View 1 Replies View RelatedWe frequently publish drawings to PDF files. However, we recently noticed that when we publish to the PDF file in monochrome, all hatching publishes in color.
We need the entire PDF in black and white, but I can't figure out what settings I'm missing.
Recently upgrade to ACad 2012 from 2002 and have a Designjet 500 at my office and am having trougble with a dot hatch in .plt files being sent to my printshop.At my office, I'm using a Designjet.pc3 file for both the 2002 and 2012 dwg files and they plot identically, no problem.
In creating a .plt file using a 750c.pc3 file for both 2002 and 2012 files for my printshop, the plt file for 2002 plots fine but the plt file for 2012 omits the dot hatch. Other hatches on both drawing plot fine. In print preview in both ACads both files show the dot hatch. I'm using ABviewer to check the hatch problem so I don't have to keep bothering my printshop about this. With the 2002 plt file it looks fine but in the 2012 plt file the dot hatch is missing. ABviewer shows results consistant w/ my printshop.
Am using identical pc3 files and identical CTB files. This problem goes across all my drawings....all hatches work between 02 and 12 except the dot hatch. All drawings were qsaved into 2012 from 2002 when I ungraded cads.
I have created a new 750c.pc3 file and the problem is found in that as well.Attached are just small samples of the problem showing 2002 and 2012 examples.I can only believe I am missing a setting somewhere in 2012 or there is a problem between 2012 and the 750c print driver.
I'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies View RelatedMy screens show solid dimension numbers and arrows but when I print they appear as hollow. I can't find what setting this is or if it is a print setting.
View 3 Replies View RelatedI'm using a HP DesignJet T1100 (non postscript). I have inserted a screen capture of a google map into a sheet as a area/aerial location map for the project. Unfortunately, the jpeg is plotting out as solid black. I have tried inserting it in different ways but same result when plotting. I understand the difference between PS and nonPS plotters/drivers but I was under the impression that there was a setting to plot images in nonPS plotter dialouge box. I did find various incarnations of my question but nothing that directly speaks to it.
View 1 Replies View RelatedJust upgraded my PC and before when I select plot quality "high graphics" the spreadsheet comes out low resolution, if I use monochrome spreadsheets came out perfectly defined.
Now with the new PC High graphics still comes out the same but when I select monochrome all I get is a solid black block. If the OLE object is an image (BMP) it comes out perfect with monochrome,it only happens with excel files
I search the forums for an answer but the closest I found was changing the OLE type under properties (currently is embedded); problem is the field is grayed out and cannot be changed just as the source application (ms excel 2003)
By the way, on the older files created with my old PC if I just open and print them from the new computer they come out perfect; if I open the OLE file and modify it, the solid black block shows up regardless if I print to PDF or print on paper.
I am having trouble printing to an HP Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
We just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies View RelatedI have a drawing where some lines have a 60% screening in there Plot Style. The print great from AutoCAD. But when I create a PDF and then print the PDF the Screened lines show up kind of blue / purple.
I am plotting to a Cannon iPF720 on 22x34 paper from Acrobat Reader X. I'm creating the PDF from AutoCAD 2012.
I get "Fatal Error: Unhandled c000000dh Exception at 24079af3h" every time when I print to pdf with Acrobat 9 in AutoCAD 2012. However, the Acrobat converter is working properly in other applications. It only happens in ACad 2012.
View 1 Replies View RelatedI have two layers. One is set to red color, the other to blue color (using ctb). I have both layers defaulted to 1 mm line weight thickness. Blue is continuous and Red is dashed.
When printing the blue layer prints at the correct weight of 1mm, while the dashed red layer prints at a much smaller thickness. All line properties are set to default or bylayer (this is not being caused by the lines having individual special properties).
I work in AutoCAD 2010.
(AMD 64 X2 4200+, 2Gb RAM, C: 7Gb free, D: 17 Gb free)
I can not print imported images (JPG or TIFF) large size 80 - 260 Mb.
Print all but the raster! I tried to print on a plotter in JPG, TIFF, in whole or in parts, useless.
If I export the whole project in JPG 2000x3000 pix, all right, but I have 9000x10000 pixels - that size is not exported.
When I am printing from AutoCAD LT 2012, I randomly get this error message every 10 to 15 drawings that I print. Considering that I print 10-15 drawings at one time, I am getting a fatal error every time I print a set. Why? I don't get this error when printing in AutoCAD 2011LT or 2012 Full Version.
View 1 Replies View RelatedI'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
View 8 Replies View RelatedI have both ACad 2002 and 2012, (both 32-bit) installed. I have plenty of RAM.
I'm converting a .dwg file to a .pdf and plotting to the desktop to either send out the pdf file or print to myself.
My problem is that it takes "what seems like forever" to plot a .pdf file to the desktop using 2012.
My situation is:
1. In 2002, using the Adobe pdf driver it takes 6.7 seconds from the time I press plot until the pdf file appears on my desktop.
2. In 2012, using the same 2000 formated file opened in 2012 it takes 37 seconds for the file to appear on my desktop.
3. In 2012, using a .pc3 driver, the same file, qsaved and formatted to 2012 takes 34 seconds to appear on the desktop.
Acrobat was installed on my computer prior to ACad 2012 but I've uninstalled/reinstalled Acrobat and I get the same result as above.
Is there anyway to speed Acrobat up? I defrag'd, cleaned the registry but I get the same results.
I’ve done it before in the past so I know its possible but I have forgotten how. See the attached image I would like to change the printable area of my paper space layout.
View 5 Replies View RelatedI received an Autocad file from another person, opened it with Autocad 2011 LT, and it looks fine. But when I go to print preview all the lines are very thick, making the detail of the drawing difficult to see. I've tried manually changing the lineweights but it has no effect on some of the layers. Is there an easier way to fix this other than recreating layers?
View 1 Replies View Relatedim trying to make a simple rectangle thats 9" long and 1/2 " high. and when i set it up in autocad it will not print out that size not sure if im doing something wrong in the units settings or in the plot. farly new to the auto cad program
View 4 Replies View RelatedHere are my current steps for getting prints to shop floor;
1. download a list of drawings required from as/400 into Excel.
2. saveas .csv file
3. print mfg labels using label program reading .csv file
4. using labels, open .dwg from ACAD one at a time and print ea
5. apply labels to prints
6. give to mfg
I want to do this;
1. download a list of drawings required from as/400 into Excel
2. run macro to concanteate file location, name and .dwg to new column
3. run macro to print each drawing either from Excel or Acad - not sure which is better;
- Each drawing will have all label data incorporated in the drawing
- currently nothing is in the drawing for label data, I'll need to create it.
- should I insert a block that updates with the excel row data
4. give to mfg
My first goal is to be able to batch print with the same list that I use to create the labels, then I'll focus on getting the label data incorporated on the drawing.
We have 15 offices worldwide using AutoCAD with a Standard Template for ISO papersizes (A0, A1, A2, A3 & A4) however we have different printers/plotters in different offices.
Any generic print area that i can set the blocks too? if i set the print area for the OCE plotters they do not suit the HP Designjets etc.
Same issue when printing to pdf.
I need a suitable print area for All ISO sheet sizes that will work with any plotter/printer & pdf driver.
I have a new machine with windows 7 64 bit and autocad 11. When I choose the 6204 as my plotter I get the following message : "This plotter configuration cannot be used for one of these reasons: the driver cannot be found, the device cannot be found, or the driver has a problem. The None plot device has been substituted." it does not matter if I choose to try and print to the plotter or make a PDF this error comes. up..
View 8 Replies View RelatedIs there any way to print to a PDF and have the background remain black? I know how to make the colors stick for the objects but colors like yellow and cyan are hard to see on a white background.
View 4 Replies View RelatedJust upgraded from an HP DesignJet 800PS to an HP DesignJet T2300PS. Everything is printing BW, not color. Using AutoCAD 2013 and acad.ctb plot style.
View 8 Replies View Related