When I try printing to an adobe pdf file I obtain the following error:-
%%[ ProductName: Distiller ]%%
%%[ Error: limitcheck; OffendingCommand: string ]%%
Stack:
67143
/mystring
24
120
22381
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
I am plotting a file that has a pdf referenced into it. The quality of the plot is degraded only at the inserted pdf. The rest of the AutoCAD file looks fine. The inserted pdf is a printed AutoCAD file which looks clear and even has embedded layers and linework I can snap to (which seems to indicate that there is vector information present when it is in Autocad.
I have attached an image with 4 zoomed-in screen shots to show what I'm describing.
Any good chart I can have that prints a sample of all the pens?
View 6 Replies View RelatedI am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
I get "Fatal Error: Unhandled c000000dh Exception at 24079af3h" every time when I print to pdf with Acrobat 9 in AutoCAD 2012. However, the Acrobat converter is working properly in other applications. It only happens in ACad 2012.
View 1 Replies View RelatedWhen I am printing from AutoCAD LT 2012, I randomly get this error message every 10 to 15 drawings that I print. Considering that I print 10-15 drawings at one time, I am getting a fatal error every time I print a set. Why? I don't get this error when printing in AutoCAD 2011LT or 2012 Full Version.
View 1 Replies View RelatedWhen i attempt to plot some layouts to adobe pdf, they are coming out with sections that are blank. They are scattered around the drawing but the drawing content is missing. when i use the built in pdf creator, it is shifting some things around to where they don't belong and i can't have that!
View 1 Replies View RelatedWhen printing to PDF via the DWG to PDF.pc3, I am getting a blank PDF. When i hit preview everything shows fine, but when I print it all disappears. The layers list shows in the PDF on the right, but turning them on and off does nothing.
View 3 Replies View RelatedI'm using ACAD2011 and a HP DesignJet 500 plotter. We use PDF underlays of scanned charts, maps, etc in our cad plans and sometimes the PDFs will only partially plots even though the rest of the cad line work plots. We are using 2007 dwg file format to make files compatible with another program. I have monkeyed with the RASTERPERCENT and RASTERTHRESHHOLD variables but still same problem.
View 3 Replies View RelatedDWG to PDF is not printing certain files correctly. It appears to only happen with the dots hatch pattern and the Dots linetype with a 0.0003" lineweight in the CTB file. The lines with the issue have color and pline width (zero). Print preview show, plotting to a printer, and using adobe show the lineweight correctly but using DWG to PDF does not.
C3D 2013 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
i used the page setup and creat new setup to print some area ..
ist possible to make a setup to print multi area .. - when i creat new one it ask to select what i want to print , but it just ask once ,if i want to print other thing i need to creat new setup ...
what i need is to selcect multi time .
When batch plotting using an external plot utility from Model Space, I get pages with different placements on the paper, the issue appears to be that some sheets are selected for Center the Plot and some are not. Even though my plot utility has a selection for Center Plot, it won't override what is already in the page for this one option. Is there a line command I can run in a script that would allow me to set the plot to center without having to open each sheet and reset this manually?
View 3 Replies View RelatedI have a rather bizarre issue within AutoCad when printing.
This is affecting multiple people, using various machines (all the same model). It is happening when they print to multiple printers, and also when they print to PDF.
They are losing some information. The drawings themselves usually look ok, it is some of the extra data. This can be in the footnote information in the corner. This can be data within the actual drawing. It is not a guaranteed fault, and affects them all intermittently.
How to plot PDF format drawing to Xerox 8830 plotter which the drawing have a jpg logo will change to a black fill?
View 9 Replies View RelatedI have PDF files created in AutoCad Arch 2010. When I print them some of the grayscale comes out as random zig-zag line pattern. When I veiw the PDF it looks fine. Images that do this are usually backgrounds of logos or shaded driveways / sidewalks. Some sheets out of a given set will print fine while others do this zig-zag thing?
View 2 Replies View RelatedWhen I print to .pdf for A1 and plot, no worries, all lineweights print solid and perfectly. However, when I print to .pdf for A3 (scaling lineweights), whilst all the lineweights appear solid on the screen, when I plot the layers that are set to transparency are faded/rough/broken on paper.
Ticking the plot transparency box doesn't work and it happens to my printer at home and at work. I haven't used transparent layers before and have adopted this drawing created through someone else.
I dont know whats going on, but all of a sudden all the prints i do to PDF have a washed out faded look about them.Now all those lines are on the same layer, set to print with the same pen thickness, so why does one appear bold and one hardly visible at all?
View 9 Replies View RelatedI am having trouble printing "smooth" circles. I am using Cad2012 for Mac. I have setup the shademode to 2D-wireframe, viewres to 5000 and still cannot seem to get smooth circles.
When I print form a PC, the problem is gone...
I having difficulty batch printing using Scriptpro 2.0. In short, scriptpro is using the simple batch file (see below), to add a xref and then printing using the DWG to PDF driver. I have tried using a paper printer, which works fine, so I suspect the problem is when scrippro calls the DWG to PDF driver.
I am using accoreconsole.exe application.
I inserted a "qsave" command after the xref is inserted, and the xref does get saved, so, I know the script is working up to that point.
Batch.scr
Filedia
0
Proxynotice
0
Frame
1
Frame
[code]...
I have a problem when I print documents regardless of the printer I use.
If the document is on the network, colors are printing in black.
But if I copy this document locally on my computer, colors are printing normally.
Note : I'm using AutoCAD 2012 LT
Is is possible to "que" a bunch of drawings to be plotted? I would like to be able to open a drawing and plot it, then while it's plotting, open another drawing and plot it, then another and so on and so on. However, I get an error message stating that another plot is in process and only one plot or publish process can be active at one time. Thus, I'm forced to wait for the last one to complete before sending the next one to the plotter.
View 4 Replies View RelatedMy screens show solid dimension numbers and arrows but when I print they appear as hollow. I can't find what setting this is or if it is a print setting.
View 3 Replies View RelatedI’ve attached a dwf as an xref and set up a viewport, however when i print the viewport contents show up on screen, and in the PDF, but if i print it to the physical printer, nothing comes out except the lines i drew in that drawing (i.e. the polylines as references for where my viewport is).
I’ve come across this before in an older version of AutoCAD but have forgotten how to solve it.
Also, is it possible to bind a DWF? its seems you can do it with other things but not this file type.
[URL]........
2004 and how to turn "plot to file" off? Any time they go to plot the plot to file is already set and grayed out. It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.
View 2 Replies View RelatedHow to turn plot and publish log file off? (see attached pic)
I found out how to turn the one off under plot stamp settings, but I would like this box to be unchecked also and I want to do it automatically for all my users.
[URL]....
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
I have a table which is linked to a datalink from Excel. The table and contents (text) show up in paperspace; however, only the table frame shows up within the plot preview, or when I try to plot it. The text does not show up.
View 4 Replies View RelatedI have a HP DesignJet 110 nr connected as a network printer. I have all the drivers updated including the network card. I have unistalled and reinstalled all the drivers and software. I have also replaced the ink cart. too. When I print in AutoCAD 2011 it acts like it is printing stuff, but it goes throught the whole process and nothing prints. I just started creating PDFs and sending them to the printer, but thought I would give it a new shot.
View 5 Replies View RelatedI am fairly new to AutoCAD. I have a AutoCAD drawing file containing 8 drawings on it. What I would like to do is to print each drawing to a single PDF pages.
View 1 Replies View RelatedLooks like the format is not forwarded correctly to the printer when printing A3, it comes out as A4. If we change paper format in printer properties to A3 it works fine.
View 3 Replies View RelatedI have a problem with print from Autodesk Mechanical on a HP Designjet 500 24.
The system is a Windows 7 Professional 64bit.
When I select the printer, the printer returns to "none".
I have tried several drivers, the HP Designjet 500 plus 24 or HP DesignJet 500 24+HPGL2 card.
I can select the HP DesignJet 500 24+HPGL2 card, but since that driver is incorrect for my printer, it doesn't print.
I have found this same problem for a HP Designjet T610.
Here is says to use a driver version from 10 feb 2010 or later. But there isn't any driver around or after this date for the HP Designjet 500.
Other program's can print just fine through the original HP Designjet 500 24 driver.
