After Effects :: Rendering Error While Writing To File In CS5
Sep 3, 2010
I have a problem with After Effects CS 5 on Windows 7 64 bit.When I try to render out quicktime formats in After Effects I get an error message:
After Effects error: Rendering error while writing to file "E:/ . Unable to open file. (-1610153459)
Rendering to other drives, like C: or D: works fine but as soon as I try to render to the E partiton.I get this error.... It must have something to do with permissions on that partition.I don't want to reinstall windows.
View 23 Replies
ADVERTISEMENT
Nov 29, 2013
I'm using AE CC and can't render any comp using the Quicktime codec. Any other codec seems fine strangely.Attached/below is the error message that crops up whenever I attempt this.
View 4 Replies
View Related
Jul 11, 2013
I keep getting errors when importing Quicktime files (no matter what the codec is) and when exporting/rendering, (see attached screenshot for error on importing).
Error during rendering (after 10-15 seconds) is:
After Effects error: Rendering error while writing file "xxx". An output module failed. The file may be damaged or corrupted. (-1610153464)
The only solution I found it's to close and restart AE CC. Yesterday I also got a couple of crashes when rendering.
CS6 was working perfectly, error began to appear when I started working on CC.
I have Apple pro apps installed, quicktime is updated. I mainly export in lossless, photo-jpeg or png sequence.
View 7 Replies
View Related
Mar 8, 2014
I have Photoshop Elements 12. I can backup a catalog to my Mac, but not to an external drive. I have tried two different externals. Both work with my PC, but not the Mac. I created a new 1 photo catalog as a test. It will back up to the Mac, but not the external.
View 1 Replies
View Related
Feb 25, 2013
While trying to do a full backup to an external hard drive, I am getting a message "error encountered while writing file" after about 75% of the 14,000 photos. I believe I have traced the problem to a missing slide show presentation program that was on an external hard drive (F) I no longer have. The program still works (from the C drive), however if I click on the program thumbnail in the Organize screen (which points to the F drive), and try to delete it, I get a message "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media." I believe that is because it is looking for the program on the non-existent F drive. What can I do to enable a backup?
View 4 Replies
View Related
Sep 18, 2012
I am trying to move my catalog from a Windows xp computer to a new Windows 7 computer.In attempting to do so I an trying to make a backup of my catalog.When I attempt to make a full catalog backup I get an error message at the end of the writing of the backup file. The message is: "Error encountered while writing file."
The images are written to the backup file (> 20,000 images) and the Catalog.buc is written as well, but the Backup.tly is missing in the backup folder.I have gone thru my catalog and have found no unconnected files and no file that are in need of repair. Everything seems to be in order with the catalog.
View 2 Replies
View Related
Dec 26, 2013
When I try to export an image I get the error "An error occurred when writing the property "Revision number" to the file". The file still exports but I would like to get rid of this error.
View 5 Replies
View Related
Mar 14, 2013
I was wondering if there was a way for me to render a full composition in Aftereffects as a Photoshop file (1 document) that contains all the layers?
View 12 Replies
View Related
Jul 12, 2013
I am self-taught in AE and must have missed something basic here.
I am simply trying to set which image (frame) will appear as the icon for a renedered comp. I understand how to set the poster frame for a comp, and I get the desired result in the project window when the comp is selected. I "set poster time" while the timeline window is selected as well, but when my comp is renedered the icon is always the frame at 10 seconds on the timeline.
View 1 Replies
View Related
Feb 14, 2008
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
View 3 Replies
View Related
Jul 26, 2013
I had my Mac crash on me a few days ago and since then I've been only able to work on my current project for ten minutes at a time before I get the above dialogue come up.
It's not just this file that suffers from this and there doesn't appear to be a pattern to which file is affected. The files that are mentioned in the dialogue are outputs from both FCP and from AE itself, they are always Quicktimes and they are compressed with the Animation codec, although I've used a number of other codecs and it doesn't seem to make any difference. If I quit and restart AE, I can continue working for a while on a composition with the same file that caused the dialogue to appear, until it happens again, often with a different file mentioned in the dialogue.
We have re-installed the CC suite after an uninstall and clean-up, but to no avail.
Do we need to reinstall the OS? Could it be a quicktime thing?
View 6 Replies
View Related
Apr 24, 2013
Yesterday AE CS4 crashed and told me to save the project. Unfortunately i overwrote my only existing file.Now i can't open it any more, i always get the error message displayed above. Anyway, im surprised by the fact that the file still has the same size as before, so there has to be the same data in the file, hasn't it?
I also tried the capslock method and the importing method, non of them worked.At the capslock method AE only imported one audio file, but not a single composition. How to restore it?
View 6 Replies
View Related
Jun 16, 2013
I rendered a file from render queue choosing outpuit module h.264
It all seem to work fine but when i try to play the rendered file error occurs - depending on video player - some player wont play the file one is showing time of video 00:00 but plays it in media player (windows) it is showing 23:40:00 although file is 3:11... simply rendered file is not working -
i am working on dynamic link seq from premiere pro...
soft: AE CS5
View 1 Replies
View Related
Dec 10, 2010
getting this error "Error writing to temporary location " when installing Lightroom 3.3 [ update] on windows 7.
View 2 Replies
View Related
Apr 3, 2013
I have been working for the last couple of hours "copying objects" into my part file. I am creating composites from surface data that exists in other part files. I now cannot save my part which I have renamed TEST.IPT for the purposes of this request. This is a common workflow for me when I am recreating a part from multiple imported CATIA files. (I know it is hard to guess withour providing the actual data.)
Problems encountered while saving the document.
Error(s) detected while writing segment PmDCSegment in database TEST.IPT
Error detected while saving object of type MIxTransactablePartition in TEST.IPT
Error detected while saving object of type MIxPartition in TEST.IPT
The attempted write operation did not succeed. Part file may be corrupt.
The database in TEST.IPT could not be saved
View 6 Replies
View Related
Jun 7, 2006
I draw, or even add text to an object this always pops-up:
Disk Error- 108 occurred while reading or writing to a scratch disk. this error is unrecoverable.
What can I do about this? This has NEVER hapenned before.
I'm on a Compaq Presario PC, OS: Windows XP Home Edition.
I am using Photoshop CS2.
View 2 Replies
View Related
Oct 28, 2012
This problem has existed since I purchased a replacement laptop and reinstalled PSE 8..I have a little less than 8,000 photos and I back up to an External HD..I have read the earlier extensive discussion on this topic which seemed inconclusive as to whether it could be resolved.The problem seems to exist in PSE 8
View 1 Replies
View Related
Dec 20, 2012
I have a file path im trying to capture in a text file however its not working and autocad is prompting back,
; error bad argument type: streamp nil
Im assuming its because of the slashbacks but Im not sure..
Hence the code so far...
(defun C:GO ()(SETQ ACADLSP (findfile "acad.lsp"))(setq f (open "C: est.txt" "w"))(write-line ACADLSP f)(close f))
View 4 Replies
View Related
Jun 24, 2013
I'm running AutoCad LT 2012, this message appears right after the startup loading page and its always different with the exception of 3544 at the end of every code. I've tried a repair and a reinstall but this keeps popping up.
View 1 Replies
View Related
Feb 5, 2013
I have just installed Autocad LT 2013 (licence bought yesterday) on a new Lenovo E330 laptop and the first time I'm trying to run Autocad I'm getting the following error: "fatal error: unhandled Access violation writing 0x0000 exception at 0h".
[URL]
1. regediting the DWORD Low to all 0000000, but it goes back to whetever value it was (i have tried with changing value and restarting, not restarting... etc. numerous combinations) and the error is still there
2. On one ocasion an autodesk employees on that thread informed the user that the generated error report was pointing towards a usb display adapter, and as I was using an external replicator (USB) I decided to try with the laptop running by itself on it's own graphics, that didn't change the error message. Next step update the HD4000 driver to the latest from intel, but still the same fatal error.
On top of the above i have also completly unistalled Autocad and all related products, performed new installation with same fatal error again after the installation. I have tried different comatibility modes when running the software and i have tried running as administrator (although I am logged as administrator anyway)
View 1 Replies
View Related
May 16, 2013
I Have an Error (( autocad 2013 fatal error unhandled access violation writing 0x0000 exception at 0h ))
View 1 Replies
View Related
Apr 20, 2013
Is there a reason that After Effects keeps crashing and only getting to a certain render point when pressing "0"? If I split projects into different compositions I don't tend to get the same issues, but it's more pain than it's worth spiting one video into 4 parts.
View 5 Replies
View Related
Jan 13, 2014
I am trying to make about a 7 second clip of some photography (converted into that cool 3D paralax effect) with a lens flare and a CC light rays effect. The damn thing took two hours and was less than halfway done, which seemed extremely long to me. Here is my setup:
i7 4770 (2 processes for system, and 6 for AE, with 2 gigs per process)
Nvidia 760 4bg
32 gigs ram (4 set aside for system and the rest for Creative Cloud stuff)
SSD: system, media cache
HDD: projects, files
Everything else I've tried to render has been reasonable times. For instance 5 minute clips usually take about 15 minutes. I've tried variations of the multiprocessing tab to no avail, and changing the media cache to HDD which didn't work also. Just seems like something is going terrible wrong.
So I guess my question is twofold.
1) How important would it be to get another drive? (I'm between adding one SSD or getting 2 HDD's per my budget, which presents another question of would a 2 SSD, 1 HDD setup be better than a 1 SSD, 3 HDD setup)
2) Do I possibly have something configured wrong?
View 4 Replies
View Related
Jul 3, 2013
So today I was editing and I finished, so I tried to render it so I can have in a .avi. But once I rendered it I got no errors or nothing. So I went to the desktop were it should have been placed, I loaded it and it didn't render properly after a couple of secs the music stops playing and I didn't get the glow effects or the full edit. How do I fix this tell me if you need sertain information.
View 6 Replies
View Related
Jun 14, 2013
Every time I run AutoCAD 2014, I get this message:
Fatal Error: Unhandled Access Violation Writing 0x006c Exception At a5d45122h
It then shuts the program down, and asks if I want to send an error report to Autodesk, which I have done.
I'm running Windows 8 Pro.
View 4 Replies
View Related
Sep 28, 2012
I have a CAD user when they try to print they get a Fatal Error
"FATAL ERROR: Unhandled Access Violation Writing 0x0034 Exception at 6ce5a6b4h"
What does that mean?
View 3 Replies
View Related
Jan 5, 2014
Any way of creating a glowing object without using the rendering effects.I am trying to create an Acrobat 3D file using Tetra 4D which does not support 3DS Max rendering effects.
View 1 Replies
View Related
Mar 28, 2014
why my After Effect render so lousy???When i finish my rendering,the video play very slow and keep stopping....I've tried for many times,but it's still the same result..
View 2 Replies
View Related
Mar 3, 2014
I am currently working on After Effects CS6 and I'm wondering why it takes a long time for me to render a composition. I am not sure if the problem is with the mac that i am using or with the settings i have on AE. When I render the composition of 21 seconds video with 1080p 29.97fps it takes 5 hours and eralier i triend rendering again and it takes 7 hours. is this normal?
I am using Mac with this spe
Processor 2 x 2.4 GHz 6-Core Intel Xeon
Memory 12 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5770 1024 MB
View 4 Replies
View Related
Feb 14, 2013
I downloaded a composition from Videoblocks.com and hit RAM preview to let it play smooth. Then whetever I move the CTI after that, it de-renders.This has never happend in other compositions I've worked in.
View 3 Replies
View Related
Jul 9, 2013
just switched from a macPro to a Windows Workstation specs are:
Windows7 with ServicePack1
intel Corei7 3970X
64GB RAM
Nividia GeForce GTX680
Using Quicktime Version 7.7.4
so everything runs smoothly till i try Rendering my comp in a .mov-Container Codec doesn't matter which one i take. Tried everything from Fotojpeg to DNXHD to png. Nothing Changes. As soon as i swiitch to avi rendering it's really fast. (Project rendered in 5mins whereas i cancelled the rendering after 15mins when trying to render to QT-Fotojpeg)
View 1 Replies
View Related
