I'm using AE CC and can't render any comp using the Quicktime codec. Any other codec seems fine strangely.Attached/below is the error message that crops up whenever I attempt this.
View 4 RepliesI keep getting errors when importing Quicktime files (no matter what the codec is) and when exporting/rendering, (see attached screenshot for error on importing).
Error during rendering (after 10-15 seconds) is:
After Effects error: Rendering error while writing file "xxx". An output module failed. The file may be damaged or corrupted. (-1610153464)
The only solution I found it's to close and restart AE CC. Yesterday I also got a couple of crashes when rendering.
CS6 was working perfectly, error began to appear when I started working on CC.
I have Apple pro apps installed, quicktime is updated. I mainly export in lossless, photo-jpeg or png sequence.
just switched from a macPro to a Windows Workstation specs are:
Windows7 with ServicePack1
intel Corei7 3970X
64GB RAM
Nividia GeForce GTX680
Using Quicktime Version 7.7.4
so everything runs smoothly till i try Rendering my comp in a .mov-Container Codec doesn't matter which one i take. Tried everything from Fotojpeg to DNXHD to png. Nothing Changes. As soon as i swiitch to avi rendering it's really fast. (Project rendered in 5mins whereas i cancelled the rendering after 15mins when trying to render to QT-Fotojpeg)
I have a problem with After Effects CS 5 on Windows 7 64 bit.When I try to render out quicktime formats in After Effects I get an error message:
After Effects error: Rendering error while writing to file "E:/ . Unable to open file. (-1610153459)
Rendering to other drives, like C: or D: works fine but as soon as I try to render to the E partiton.I get this error.... It must have something to do with permissions on that partition.I don't want to reinstall windows.
How to render quicktime videos using the 64-bit version of 3DS Max?
View 9 Replies View RelatedAfter having made a record of my project, I see and hear a sound interference that looks like "click click click click click click". This often happens when rendering the transition constant gain.Here above render my project, the result and the problem.
And here below the photo of my project not encode, before rendering. occurred since the last update 2 Premiere Pro CC.
I have an animation I am trying to render as a Quicktime using H.264 compression at 720x480 with just one camera. I have 4 different sound clips (wavs) loaded into the scene. When I scrub the slider, the sound works just fine. However, when I render the scene as the mov, the sound does not render with it. Do you know why this isn't working and how to fix it so the sound will render with the mov?
I am using the ProSound option and rendering the scene at 30fps. Normally the sound works just fine when I render but now it won't work.
I have a problem rendering my animation in photoshop. I have cs4, 5.5 and 6 installed and still i can render because the quicktime section is not active. I have quicktime installed already. my pc is a dual core cpu @ 2.70GHz, 2.0GB ram, 32bit operating system x64 based processor.
View 2 Replies View RelatedI m trying to render a time lapse video on PS CS4 and the process works well up until the export window. When i go there the first option under file options, quick time export, is unavailable( grayed out). The only available option is Image sequence. What do i have to do to enable the quicktime movie creation or any other movie format for that matter?
View 2 Replies View RelatedI'm trying to render quicktime files and recieve this - After Effects error: Rendering error while wriring to file . Unable to open file. (-1610153459)
My rig
i7 CPU 93- @ 2.800
2 x GeForce GTX 460
16 GB Ram
These are files which I've previously rendered without a hitch, this started yesterday. I've deleted folder in appdata with no success.
I recently upgraded to Mountain Lion form SL. Suddenly AE can't import lot of .movs.I am almost sure this is a compatibility between the Quicktime components nor the location of them.
For instance, some H264 files are imported fine, as Mp4 files as well. Pro Res, PNG, even Animation! Gives me the "this Moov is unsuported or damaged"I removed the AE pref., chequed my disk permissions, and nothing. Also, i can't see Adobe QT32 Server in the Activity Monitor, but i think this is not a problem because other quicktime files are imported ok.I don't have any firewall trying to break the communication between AE and QT. I tried to opend the files in Premiere, and Media Encode and gives the same errors..I have removed Xvid, Perian. From Quicktime Pro, i have removed all third party component in Libray/Quicktime and in System/Library/quicktime and nothing. Also I'm lost WHERE the final qt components go:
1-HD/Library/Quicktime
2-HD/Users/User/Library/Quicktime
3-HD/System/Library/Quicktime (empty, i don't know why)
The QT codecs: Quicktime pro opens certain files and when i tried to export, it crashes. Quicktime X Plays the files normally, even Prores and even the Finder Preview sees them.this is the QT report:
Process: QuickTime Player 7 [1638]Path: /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7Identifier: com.apple.quicktimeplayerVersion: 7.6.6 (7.6.6)Build Info: QuickTimePlayer-17090000~1Code Type: X86 (Native)Parent Process: launchd [307]
User ID: 501
Date/Time: 2013-08-09 12:33:11.002 -0300OS Version: Mac OS X 10.8.4 (12E55)Report Version: 10
[code]....
I was using CS5.1 for a while with no problems. Everything went well until one day it gave me an error on hardware acceleration. All it did was give me a scrubby zoom. I spent a few days researching it and eventually gave up on finding a solution.
So I thought I'd try out CS6, to see if it fixed anything. It doesn't. It's worse, even. It crashes randomly at various actions (like switching tools, changing layers, saving), and it crashes without fail if I use liquefy or transform a layer and then try to duplicate it (I'm just trying to make a gif, darnit!) If I'm just drawing and erasing and using undo, it doesn't crash as much. Scrubby zoom is still a problem.
My driver is up to date according to the HP website:Intel High-Definition (HD) Graphics Driver2010-12-03 , Version:8.15.10.2189, 78.05MIt's really old, but HP isn't updating it. I've tried uninstalling it and reinstalling it. Moot point.The driver is compatible with OpenGL.
I also tried this driver, but apparently it's not compatible.
Additional info/things I've tried: Processor: Intel Core i5 CPU M 450 @ 2.40GHZ 2.40 GHzRAM: 4GBSystem type: 64-bit No third-party plug-ins. 60% memory available to Photoshop. Photoshop is updated to the latest version.Windows is updated (I spent a freggin day trying to figure that out because updates were frozen, and then spent 3 hours trying to figure out why F8 wouldn't bring up advanced boot options so I can delete old update logs so I can update windows so I can get photoshop working--TO NO AVAIL) GPU support option is greyed out, so it's already turned off.
When it crashes, all Windows says is "Adobe Photoshop CS6 has stopped working". Then the details afterwards note "files that describe the problem", which include...
The C:UsersBaniAppDataLocalTempWER7781.tmp.WERInternalMetadata.xml file, which states:
-<WERReportMetadata>-<OSVersionInformation><WindowsNTVersion>6.1<Build>7601 Service Pack 1<Product>(0x1): Windows 7 Ultimate<Edition>Ultimate<BuildString>7601.18113.amd64fre.win7sp1_gdr.130318-1533<Revision>1130<Flavor>Multiprocessor Free<Architecture>X64<LCID>1033</LCID>
-<ParentProcessInformation>
[Code]......
The C:UsersBaniAppDataLocalTempWER9D1B.tp.appcompat.txt is on pastebin here: [URL]
So I looked up other issues regarding "aticfx64.dll", and nothing works. My last options are either to downgrade again, or to upgrade my video card, but I don't know what kind of video card I need.
Recently, an error has occurred when I try to load a video. I get an error message saying the video cannot be loaded because Quicktime 7.1 or later must be installed. However, I have repeatedly installed, repaired, etc. the latest version of Quicktime on my computer.
View 3 Replies View RelatedI cannot Export QuickTime any Codec ( h264 / 444 / 442 / mp4 / PNG / Jpeg )in Smoke for Mac 2012 SAP1 - Export Media.
I can export it before but not today.I get "Error Get Frame 0" - What Does is mean ? and What is the cause ?
I try to reinstall backburner(2012.1) and mio (2012.1) not work.So i can export in sequence format like DPX / Jpeg that useless.
Just Download Utility with same version of your Smoke and Reinstall : Wiretap Gateway/Wiretap Central/MIO and BackBurner.
Is there a reason that After Effects keeps crashing and only getting to a certain render point when pressing "0"? If I split projects into different compositions I don't tend to get the same issues, but it's more pain than it's worth spiting one video into 4 parts.
View 5 Replies View RelatedI am trying to make about a 7 second clip of some photography (converted into that cool 3D paralax effect) with a lens flare and a CC light rays effect. The damn thing took two hours and was less than halfway done, which seemed extremely long to me. Here is my setup:
i7 4770 (2 processes for system, and 6 for AE, with 2 gigs per process)
Nvidia 760 4bg
32 gigs ram (4 set aside for system and the rest for Creative Cloud stuff)
SSD: system, media cache
HDD: projects, files
Everything else I've tried to render has been reasonable times. For instance 5 minute clips usually take about 15 minutes. I've tried variations of the multiprocessing tab to no avail, and changing the media cache to HDD which didn't work also. Just seems like something is going terrible wrong.
So I guess my question is twofold.
1) How important would it be to get another drive? (I'm between adding one SSD or getting 2 HDD's per my budget, which presents another question of would a 2 SSD, 1 HDD setup be better than a 1 SSD, 3 HDD setup)
2) Do I possibly have something configured wrong?
So today I was editing and I finished, so I tried to render it so I can have in a .avi. But once I rendered it I got no errors or nothing. So I went to the desktop were it should have been placed, I loaded it and it didn't render properly after a couple of secs the music stops playing and I didn't get the glow effects or the full edit. How do I fix this tell me if you need sertain information.
View 6 Replies View RelatedAny way of creating a glowing object without using the rendering effects.I am trying to create an Acrobat 3D file using Tetra 4D which does not support 3DS Max rendering effects.
View 1 Replies View RelatedI was wondering if there was a way for me to render a full composition in Aftereffects as a Photoshop file (1 document) that contains all the layers?
View 12 Replies View Relatedwhy my After Effect render so lousy???When i finish my rendering,the video play very slow and keep stopping....I've tried for many times,but it's still the same result..
View 2 Replies View RelatedI am currently working on After Effects CS6 and I'm wondering why it takes a long time for me to render a composition. I am not sure if the problem is with the mac that i am using or with the settings i have on AE. When I render the composition of 21 seconds video with 1080p 29.97fps it takes 5 hours and eralier i triend rendering again and it takes 7 hours. is this normal?
I am using Mac with this spe
Processor 2 x 2.4 GHz 6-Core Intel Xeon
Memory 12 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5770 1024 MB
I downloaded a composition from Videoblocks.com and hit RAM preview to let it play smooth. Then whetever I move the CTI after that, it de-renders.This has never happend in other compositions I've worked in.
View 3 Replies View Relatedis there a way to define a sequence of images to be rendered into a movie from the command line, without first creating any composition ? Basically loading media and creating composition by command line or by script ?
View 4 Replies View RelatedI have a .wav file in my composition that I see the waveform going across the entire composition. If I grab the first 10 seconds of my composition and hit 0 on the number pad, it correctly plays the audio the entire time. When I render that composition, making sure audio is enabled, it doesn't work. The resulting .mov file plays the audio for the first 5 seconds and then just abruptly stops.
I'm using the Creative Cloud version.
I have a fairly basic comp consisting of 3 or 4 3d layers spaced out along the Z axis, two precomps containing some edge lighting effects, a camera, a light, and the troublesome adjustment layer. The adjustment layer only contains some color correction and a flare. I thought perhaps a certain effect may be causing the layer not to render, but i eliminated that possibility by removing the effects i had and trying several other, the layer was still not rendering. I think I have exhausted all of the really simple solutions, nothing is solo'd, all the layers are visible in the preview, the layers are all in the correct order etc.. I can't SS the project right now as I am not at home, but i can tell you that I am working with CS5.5, on windows 8.1, i5 cpu, 8 gigs of ram. The really frustrating part is that a slightly earlier version of the project successfully rendered the adjustment layer and I don't remember changing anything major. Shots in the dark?
View 3 Replies View Relatedi have the imac 27 680mx 32gb ram,when i render on cs6 takes very long time, the first one takes 8-10mins,when i do the second time its very fast 30seconds
View 7 Replies View RelatedIt seams that when editing in After Effects (CS6) despite doing everything i've been told to do i get no audio when editing video clips imported from my digital camcorder. The only audio it seams i can hear in it is an actual song or audio file (MP3) and the worst part is when i render out the video after adding my effect even when i check the audio output box in the Output Module, i keep most render settings the way they are? but i have tried everything that i have seen suggested but nothing seams to work and no matter what i do i cannon manage to get any audio from my finished products unless there is an actual song in it.I must also add that in the Output Module i have tried many formats such as MPEG4, H.26, AVI, WAV, Windows Media and many others, none of them make a difference to the audio, only the quality of the video.
View 4 Replies View Related However my machine is not using all cores and is rendering very slowly.I have a mac pro running os 10.9, 2 x 2.4 GHz 6-Core, 64GB RAM, and my graphics card is an NVidia Quadro 4000 with Cuda version 5.5.28. I've looked for updates, but everything seems to be current. Not sure what I should do?
Fast Draft:Available Texture Memory:1515.00 MBRay-tracing:GPU
OpenGL
Vendor:NVIDIA CorporationDevice:NVIDIA Quadro 4000 OpenGL EngineVersion:2.1 NVIDIA-8.18.22 310.40.05f01Total Memory:2.00 GBShader Model:-CUDA
Driver Version:5.5Devices:1 (Quadro 4000)Current Usable Memory:691.00 MB (at application launch)Maximum Usable Memory:2.00 GB
sometimes rendering the RAM-Preview takes some time. while waiting I would like at least to read some articles on the internet. But as soon as I click into an other windows, AE stops rendering.
is there a special setting / workaround to avoid this (user-unfriendly behavior) ?
Today I was just about finished editing a video on CS6.What happens is that while RAM previewing at some point during the loading of the preview it will stop loading, It will then proceed to play the ram preview on loop and when I press a button to stop it a small box pops up in the centre of my screen and the ram preview bar to show what has loaded (the one which shows green for parts that are loaded and blue for cached) turns black and sometimes other parts of after effects turn black. This has happened before and I fixed it by uninstalling and reinstalling After Effects about 6 times. I would do that this time though I would like to know the cause of it and any possible fixes as it is quite irritating. Another thing that may be happening is the RAM usage is slowly filling as I render. This has happened before on my laptop and I did not manage to fix it though it was not related to the first issue that time. The last time when it happened on my laptop the RAM usage eventually filled up to 100% and it would no longer render. I am not sure if it is happening this time as it is still currently rendering though I will update the thread if it does. Finally my render is going very slowly, I am not sure if this issue is realted to any of the above or if it is just the effects I am using though. My memory and multiprocessing settings are using 6 cores of 7 with 2 GB of ram allocated to each with multiprocessing on. My ram allocated for other programs is 6GB. To fix these Issues so far I have tried clearing the cache, purging the memory and image cache, restarting my computer and reinstalling after effects.
View 1 Replies View RelatedI know it works in CS6, still have that installed. I don't get it, it's listed as a supported card in the CC spec. I have the lastest CUDA/Driver installed.
View 8 Replies View Related