I have a problem rendering my animation in photoshop. I have cs4, 5.5 and 6 installed and still i can render because the quicktime section is not active. I have quicktime installed already. my pc is a dual core cpu @ 2.70GHz, 2.0GB ram, 32bit operating system x64 based processor.
View 2 RepliesI have an animation I am trying to render as a Quicktime using H.264 compression at 720x480 with just one camera. I have 4 different sound clips (wavs) loaded into the scene. When I scrub the slider, the sound works just fine. However, when I render the scene as the mov, the sound does not render with it. Do you know why this isn't working and how to fix it so the sound will render with the mov?
I am using the ProSound option and rendering the scene at 30fps. Normally the sound works just fine when I render but now it won't work.
How to render quicktime videos using the 64-bit version of 3DS Max?
View 9 Replies View RelatedI m trying to render a time lapse video on PS CS4 and the process works well up until the export window. When i go there the first option under file options, quick time export, is unavailable( grayed out). The only available option is Image sequence. What do i have to do to enable the quicktime movie creation or any other movie format for that matter?
View 2 Replies View Relatedjust switched from a macPro to a Windows Workstation specs are:
Windows7 with ServicePack1
intel Corei7 3970X
64GB RAM
Nividia GeForce GTX680
Using Quicktime Version 7.7.4
so everything runs smoothly till i try Rendering my comp in a .mov-Container Codec doesn't matter which one i take. Tried everything from Fotojpeg to DNXHD to png. Nothing Changes. As soon as i swiitch to avi rendering it's really fast. (Project rendered in 5mins whereas i cancelled the rendering after 15mins when trying to render to QT-Fotojpeg)
I'm using AE CC and can't render any comp using the Quicktime codec. Any other codec seems fine strangely.Attached/below is the error message that crops up whenever I attempt this.
View 4 Replies View RelatedI keep getting errors when importing Quicktime files (no matter what the codec is) and when exporting/rendering, (see attached screenshot for error on importing).
Error during rendering (after 10-15 seconds) is:
After Effects error: Rendering error while writing file "xxx". An output module failed. The file may be damaged or corrupted. (-1610153464)
The only solution I found it's to close and restart AE CC. Yesterday I also got a couple of crashes when rendering.
CS6 was working perfectly, error began to appear when I started working on CC.
I have Apple pro apps installed, quicktime is updated. I mainly export in lossless, photo-jpeg or png sequence.
My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
View 4 Replies View RelatedI am really messing my model,.. am using 3ds max 2010,. my problem is when i render my animation in active time segment my first frame seems ok,. but as its goes on the lights looks fading or turning it off as it goes by i already check the "compute advance lighting when required" and nothings change,.. let me attach some pics.
the first pics is frame 0000, the second pics is 39th frame,.. if you take a look on white materials they turned grey,.. and in frame 200 the lights are really out i cant show them any more cause i deleted them and when i render in range (i.e.) i start in 40th frame the lights or materials came perfect but again if goes by the result fading let me attach the 40th frame using "range".
ever since I updated to the newest version of quicktime, any file using the Quicktime animation codec stutters and freezes on playback.
This has happened before, and rolling back to previous versions worked then, but isn't working now.
I've gone far enough as to format the computer and reinstall everything, but the problem still occurs. Every other codec seems to work fine. I can work around it by using other export methods, but it's a problem when I need to edit previous or co-workers projects on my machine.
Here are my specs:
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_rtm.101119-1850)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z87X-UD3H
BIOS: BIOS Date: 05/16/13 21:47:33 Ver: 04.06.05
Processor: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (8 CPUs), ~3.4GHz
Memory: 32768MB RAM
Available OS Memory: 32656MB RAM
Page File: 4053MB used, 61256MB available
Windows Dir: C:Windows
[code]....
Here's an example of how the image is now being displayed:
I recently upgraded to Mountain Lion form SL. Suddenly AE can't import lot of .movs.I am almost sure this is a compatibility between the Quicktime components nor the location of them.
For instance, some H264 files are imported fine, as Mp4 files as well. Pro Res, PNG, even Animation! Gives me the "this Moov is unsuported or damaged"I removed the AE pref., chequed my disk permissions, and nothing. Also, i can't see Adobe QT32 Server in the Activity Monitor, but i think this is not a problem because other quicktime files are imported ok.I don't have any firewall trying to break the communication between AE and QT. I tried to opend the files in Premiere, and Media Encode and gives the same errors..I have removed Xvid, Perian. From Quicktime Pro, i have removed all third party component in Libray/Quicktime and in System/Library/quicktime and nothing. Also I'm lost WHERE the final qt components go:
1-HD/Library/Quicktime
2-HD/Users/User/Library/Quicktime
3-HD/System/Library/Quicktime (empty, i don't know why)
The QT codecs: Quicktime pro opens certain files and when i tried to export, it crashes. Quicktime X Plays the files normally, even Prores and even the Finder Preview sees them.this is the QT report:
Process: QuickTime Player 7 [1638]Path: /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7Identifier: com.apple.quicktimeplayerVersion: 7.6.6 (7.6.6)Build Info: QuickTimePlayer-17090000~1Code Type: X86 (Native)Parent Process: launchd [307]
User ID: 501
Date/Time: 2013-08-09 12:33:11.002 -0300OS Version: Mac OS X 10.8.4 (12E55)Report Version: 10
[code]....
My current workflow is to use 3ds max to render image sequences of animation, then to use Media Encoder to convert them to mov files using the Quicktime Animation codec. The problem is that using these clips in Premiere prevents me from scrubbing the sequence timeline fluidly, even tho all of the files are being accessed from a Thunderbolt drive on a Macbook Pro. Even opening them in the Quicktime player causes sluggish playback. The images rendered are 1280x720. Because of the animation being frame based, I need the derived video to not drop frames like some codecs do, so the Quicktime Animation codec prevents that and it preserves the alpha channel in the images. So my question is, what can I do to improve this so that scrubbing the timeline becomes fluid?
View 16 Replies View Relatedin any version of 3ds max to have an animation rendered as it looks like in the viewport. Without any render engine (scanline, mentalray etc...). So the exported avi looks exactly what i see in the viewport during editing.
3D Studio Max 9 32bit
Windows 7 Ultimate 64bit RC
Core 2 Duo 4600 @ 2,40 GHz, 2,40 GHz
4 GB RAM,
NVidia GeForce 9600GT
500 GB + 160 GB HDD
I've been given the task of rendering an animation of a towerblock covered in RGB leds. Approximately 200 of them. I don't suppose there's a clever way of importing a light-show, rather than dying of old-age fiddling with the curve editor?
The lighting designer is using 'ShowCAD' which is apparently quite popular in the industry..
[URL] .....
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
i created an animation inside symbol.i created a button outside the symbol. the animation only works when the button click?
View 4 Replies View RelatedWhen the animation is running, if I select another tab, the animation will stop. I would like it to continue. How do I do this?
View 1 Replies View Relatedhow I can stop rendering an animation and still retain what has already been rendered?
View 9 Replies View RelatedAfter running a rendering for an animation, I opened up the .wmv file to see that everything was a blur. The anti-alias was set to high, screen resolution to 1024x768, frame rate 25, and 1500 kbps. Is there something that I am doing wrong?
View 8 Replies View Relatedbackburner is a good tool, but it doesnt always work as expected... everything that is not an image is simply ignored while sent over the network. hence problems of "missing map". (and the server does not render anything if anything is missing) be it an audio file, or anything else. like the point cache file. max has no problem to send the XML file, but will not even look at the MC that is linked. those particular ones are giving me a very bad time dealing with them.
is there a way to trick max into baking point cache into a vertex animation or something ? (i know maya does it, but i never found a way for that in max) or maybe tricking backburner into sending EVERY files related to the max file. also, the "save as archive" doesnt take it eighter. i suspect someone forgot to implement it in the function..
Our marketing team is requesting the resolution of our product video to be 1920 x 1080 pixels. Invetor Studio only allows me to select between 176 and 1280 pixels, is there a way to change this setting?
View 5 Replies View Relatedi have got 2 ways to create foliage for architectural rendering. One of them is using proxies and the other is using particle system.I have got another idea.
Use position restricted one polygonal plane with opacity mapped plane.Scatter.Look at constraint with camera.
Since Edge only has rectangles and ellipses built in as available shapes, how to I/we work with polygon shapes and active mouseover areas INSIDE of these shapes and non-active mouseover areas OUTSIDE of the shapes?
Problem/symptom: when I import a polygon, be it any file format from from Photoshop or SVG from Illustrator, a rectangular border/background (transparent) gets applied, leading to this rectangle defining the mouseover area of the shape - and not the shape itself (be it a star or whatever).
WHAT I WANT: the very shape defines the mouseover area. How do I achieve this?? See examle below:
WHAT I DON'T WANT: how is is now:
All of a sudden when I save a .psd file in CS6 (windows 7) it now bears a quicktime file icon. How I can get back the standard photoshop file?
View 10 Replies View RelatedI've got some quicktime movies that I'd like to snag a few seconds from and convert them to an animated gif format. Any ideas on how to achieve this?
View 2 Replies View Relatedif I open a quicktime in PS cs3 I know I can add an adjustment layer which will affect all the frames of the quicktime. Can I also add a filter to all the frames?
View 1 Replies View Relatedhow to create a 360 panorama in CS4 Extended but have yet to find out how to export this into a usable format like Quicktime (and be able to pan around inside the scene). Can someone please point me to where I might be able to find out how to export my panoramic creation?
View 1 Replies View Relatedwhy i cannot change the color of the background when rendering? It is always black, and i cannot attached or make new material, if need to attach jpeg or new texture on my drawing, cannot create new material. what should i do? im currently using autocad for mac 2012.
View 1 Replies View RelatedWe're seeing an issue when exporting in H.264 (High Quality) and playing in QuickTime 10.0 (Mac OS 10.6). We are using a custom size video to fit a spot on our website (398x498). When exported and played in QuickTime 10.0 the white inverts throughout the video (back and forth). The same issue is not seen when viewed in VLC, QuickTime 10.1 Chrome, Firefox, Flash or IE.
We are also NOT seeing the same issue when we export the same video to a different custom size (336x596). Those videos play normal in QT10.0. And lastly we're NOT seeing this issue when exporting as QuickTime/JPEG2000 format.
the issue is very specific to QuickTime 10.0 on Mac 10.6. VLC, Flash, Chrome, FireFox all play it correctly.
I m trying to render a time lapse video on PS CS5 and the process works well up until the export window. When i go there the first option under file options, quick time export, is unavailable( grayed out).
The only available option is Image sequence. What do i have to do to enable the quick time movie creation or any other movie format for that matter? I am using photoshop cs5. my operating system is windows7.
I try to cut and paste a jpg file from preview to photoshop, I get "Quicktime and a TIFF (uncompressed) decompressor are needed to see this picture" - What the #$@!.. I am running CS2 Premium on the new MacBook w/ OSX 10.4.8.
View 3 Replies View RelatedWhen I import a Quicktime movie Uncompressed 10 bits or Apple ProRes 4444 (1920 x 1080(1.00) 25.00 fps Trillions of collors) >> to PS CS5 or CS6 Extended the first frame is missing and the last frame is doubled?
View 3 Replies View Related