After running a rendering for an animation, I opened up the .wmv file to see that everything was a blur. The anti-alias was set to high, screen resolution to 1024x768, frame rate 25, and 1500 kbps. Is there something that I am doing wrong?
I just installed IV 2011 and I am trying to record an animation in my .ipn file to a .wmv file. When I hit the record icon I give it a .wmv file name, hit save. Choose custom profile and set my bandwidth to (Custom) 500 and my pixel size to 1200 x 900 and hit OK. Then the animation dialogue box comes up and the record button is not depressed like it is supposed to be. I can record it with the default settings, but it looks horrible.
Our marketing team is requesting the resolution of our product video to be 1920 x 1080 pixels. Invetor Studio only allows me to select between 176 and 1280 pixels, is there a way to change this setting?
in any version of 3ds max to have an animation rendered as it looks like in the viewport. Without any render engine (scanline, mentalray etc...). So the exported avi looks exactly what i see in the viewport during editing.
3D Studio Max 9 32bit Windows 7 Ultimate 64bit RC Core 2 Duo 4600 @ 2,40 GHz, 2,40 GHz 4 GB RAM, NVidia GeForce 9600GT 500 GB + 160 GB HDD
I've been given the task of rendering an animation of a towerblock covered in RGB leds. Approximately 200 of them. I don't suppose there's a clever way of importing a light-show, rather than dying of old-age fiddling with the curve editor?
The lighting designer is using 'ShowCAD' which is apparently quite popular in the industry..
[URL] .....
ACad, MEP, 3DS Max Windows 7x64 X5482 @3.2Ghz 8Gb Ram Quadro FX1700
I have an animation I am trying to render as a Quicktime using H.264 compression at 720x480 with just one camera. I have 4 different sound clips (wavs) loaded into the scene. When I scrub the slider, the sound works just fine. However, when I render the scene as the mov, the sound does not render with it. Do you know why this isn't working and how to fix it so the sound will render with the mov?
I am using the ProSound option and rendering the scene at 30fps. Normally the sound works just fine when I render but now it won't work.
backburner is a good tool, but it doesnt always work as expected... everything that is not an image is simply ignored while sent over the network. hence problems of "missing map". (and the server does not render anything if anything is missing) be it an audio file, or anything else. like the point cache file. max has no problem to send the XML file, but will not even look at the MC that is linked. those particular ones are giving me a very bad time dealing with them.
is there a way to trick max into baking point cache into a vertex animation or something ? (i know maya does it, but i never found a way for that in max) or maybe tricking backburner into sending EVERY files related to the max file. also, the "save as archive" doesnt take it eighter. i suspect someone forgot to implement it in the function..
I have a problem rendering my animation in photoshop. I have cs4, 5.5 and 6 installed and still i can render because the quicktime section is not active. I have quicktime installed already. my pc is a dual core cpu @ 2.70GHz, 2.0GB ram, 32bit operating system x64 based processor.
i have got 2 ways to create foliage for architectural rendering. One of them is using proxies and the other is using particle system.I have got another idea.
Use position restricted one polygonal plane with opacity mapped plane.Scatter.Look at constraint with camera.
So perhaps I'm missing something blindingly obvious, but in previous versions of Maya, I've been able to simply hit F8 and check the '?' icon to be able to go in and individually rotate Local Rotation Axis to be the way I want.
For some reason I cannot find how to do this now in 2011? I've only been able to do them using the auto-tool.
Looking for the steps I need to take to be able to manipulate the local rotation axis individually as I have in the past now?
why i cannot change the color of the background when rendering? It is always black, and i cannot attached or make new material, if need to attach jpeg or new texture on my drawing, cannot create new material. what should i do? im currently using autocad for mac 2012.
The view cube in INV2011 has the front view as the front view and the top as the top (I am using XY as top, and XZ as front). When I export to DWF everything gets turned on its side. XY is FRONT (previously TOP), top is upside down view of one of the sides. I've done the make current view home in 2011.
I'm trying to create a two sheet drawing showing the different states of manufacturing for a fabrication that is further machined. The first sheet would be the fabrication and the second sheet would show the final machining. Due to the complexity of the part, cramming everything onto one drawing is not a very good option. I was hoping to use Views or LOD but that won't work. Am I missing something? The part is not suitable for using the weldments option either.
issue I'm having editing some drawings. I have been tasked with editing some drawings that were given to me in .dwg. I can open the files fine in Inventor 2011, but I cannot edit them. Do I need AutoCAD to edit the dwg files?
When I save as DXF, I have to manually go into options on the save tab and click "default DXF configuration," otherwise it exports the file as a ZIP folder. I can't figure out how to save the configuration so I dont have to manually do that everytime, im sure it something simple, as it usually is..
So I have set up a new style for rotate balloon text in Inventor 2011. But I am running into a problem when I pull the balloon away from the view to have a leader it does not stay rotated.
I've been working with Inventor 2011 - Pro and have not had any success with utilizing a bolted connection (blind hole) in an FEA stress analysis. I have reviewed and one suggestion involved a using a bolt placed "as custom" instead of "as standard". It appears however that there is a default setting that I currently have which doesn't allow this as a selection.
My co-worker is working on his first Inventor project and he opened up Inventor 11 this morning and both his panel and browser bar are no where to be seen - yet checked off in the options as visible? What is the problem and how do we fix it. He used it two days ago and everything was fine.
When I have an assembly open and I right click on a part, there is about a 4 to 5 second delay until I get the context menu. The second time that I right click on the same part, the menu comes up almost instantly.
Does not matter if it is a "large" or "small" assembly. See the same lag. Here is a link to a short video [URL]
I have tried using different projects files and disabled the "Quick File Open" in app options. Neither made any difference.
Hardware setting set to "Performance". Using nvidia driver 257.21 and running a GTS 250 card. I have the advantage sub pack #2 installed.
In the attached sample file if you edit the sketch in the first surface feature and change the dimension of 600 to 700, both the patch and loft features fail. It seems to be the curved edge that is the problem in both cases.
I cant see anything wrong with either way of modelling this so assume its a bug.This causes other problems in my real model with parts that reference these types of surfaces falling apart further down stream and is wasting heaps of $$$.
I just installed the student version of Inventor 2011 on my machine. Everything went well but when I double click the inventor icon nothing happens. Autocad mechanical and TruView work fine.
We currently use a Gestetner 3227 B/W printer as a system printer and have experienced consistent print problems while plotting CAD drawings. We now have the opportunity to try to avoid print problems with a new printer.
We currently have Autodesk Inventor 2011 software (but only use the Mechanical Desktop feature for 2D & 3D), a Widows XP operating system and print to 8-1/2 x 11 and 11x17 papers only.
1) Does Autodesk have a list of recommended or compatible "Printers" that I can be directed to?
2) Is there a specific question, feature or requirement that the office manager should ask about the printer to assure compatibility?
So far, when asked if the printers are Autocad compatible, the vendors claim that their printers "should be compatible" or that they need further details about the autodesk product without being able to specify the type of details they require.
I have 2011 and 2012 inv but for some reason my content center in 2011 is empty and when I check everything is in red and not available,it was fine and 2012 is fine,when I check its giving me a location and it ends in 2011 not 2012,I'd tried repair and reinstall.