I just installed the student version of Inventor 2011 on my machine. Everything went well but when I double click the inventor icon nothing happens. Autocad mechanical and TruView work fine.
View 1 RepliesI'm working in autoCAD 2011 and I have a quick question: When I open the drawing up from a recent save, all my polylines are not accurate and don't show curves. When I double click the lines, it adjusts itself and shows the curve that I had drawn. Why is this? Will this affect the file if I choose to plot it? Can I keep the lines curved and not have to double click every single line when I open the file just to see what it's supposed to be?
View 2 Replies View RelatedFor exam purpose I'm install Inventor 2012 and after finishing exam Inventor 2012 is uninstalled.
And then I'm trying for run Inventor 2011 but can't run.
So what happen with my Inventor 2012 where before install Inventor 2011 is running normally.
I have two drawing from different companies, both of which have attributed borders with tags, I double click on one companies border and go into the attribute editor as expected, the other one however when double clicked takes me straight into block editor, whats going on?
View 9 Replies View RelatedI'm in the process of converting existing VBA code to VB.NET using AutoCAD 2010 and MS Visual Studio Professional, and I just hit a major snag.
In AutoCAD 2010, double-clicking a block will display its attributes in the attributes editor; I would like instead to be able to display my own custom vb.net form showing some of the block's attributes, IF AND ONLY IF the block was created by my dot net form (the block would have certain identifiable characters in its name).
So far, I have discovered that this may have something to do with the cuix customization file, as well as setting the system variable DBLCLICKEDIT.
why does 11 change photos when double clicked on
View 2 Replies View RelatedI have a new laptop (Intel i7) and having issues running Map 3D. There is a delay after every command.
View 1 Replies View RelatedSystem Information:
Win 7 Pro 64-bit
AutoCAD Map 3D 2011 x64
Hardware:
Core i5- 650
8GB Ram
NVIDEA FX 580
Our company purchased two brand new computers and upgraded to Map 3d 2011 and it has resulted in major time lag and running slow issues. We use a 15mb city map as are main drawing file and in AutoCad Map 2004 it runs smoothly. After the upgrade thing are running very poorly. Selecting and deleting files that could be done in seconds in 2004 now can takes a 1/2 hour. The program also seems to get stuck periodical on a selected item , requiring restart. We have upgraded all the drivers and I have tried several different display drivers. I have saved the map as a 2011 file and I have repaired it. I have tried upgrading to Map 2012 but the problems persist.
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedHave recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
I am trying create a double button image like this [URL].......
How I create this in Gimp? It is possible? I've tried doing it but the canvas is in the background, i want both buttons floating (with the grey and black squares showing behind).
Any time I click on "Create 2D sketch" when editing a part in place in an assembly, the view moves to an isometric view. It happens as soon as I click on the button. Is there any way to stop this happening?
This does not happen when I'm editing a part (.ipt) on its own. I'm aware of the "Look at sketch plane on sketch creation" issue: this is not the same thing since it happens as soon as I click on the button, i.e. before I actually create the sketch.
I want the view to remain as it was before I click the button, to keep the things I'm looking at in view.
While working on assembly detail drawings my system pops up a message that " Running low on memory ".
View 3 Replies View RelatedI have an ilogic rule with multiple Subs. How could I run one specific sub contained in that rule from an iLogic form or another rule?
View 2 Replies View RelatedIs there any way to put the 2011 topobase and the 2011 ArcGIS plugin into 2012 or 2013? Seems such a shame just to lost all of that functionality.
View 2 Replies View RelatedWe have some Problems with the running order of iLogic Rules.
I try to describe it in an Example, you can find attached. (The description (PDF) and the ipt-file)
We're using iLogic via Addin in Inventor 2010. But I also tried it, with the 2012 version (the same problem).
The attached IPT File is running in the correct order.
how to Run Commands Using the API. And he also shows API can provide one sets of input to the command.
In my case, the Inventor command "analyze interference" need two sets of inputs. I tried to feed the commands with two selectset input throght API (see attached code). But the command looks like only take one set of them.So the behavior is not what I want.
So if it is possible, how to provide 2 set of pre-defined input to inventor commands throught API?
I am running Autodesk Inventor Pro 2012 and am trying to start learning to use my dynamic simulation and FEA features. I recently just purchased the Up and Running series by Wasim Younis. I was working with his models on the multiple actuating jacks and noticed none of the features are constrained in the assembly. Now my question is, is this how these should always be setup? I am working on trying to set up a simulation of a frame I am rotating 90degrees with 2 hydraulic cylinders working together so as to use the strong side of each of the cylinderds when it goes each direction. The way I have it set up I have the whole thing constrained. The 2 cylinders are constrained so that they have their stroke 17.23" and the turntable frame is constrained to rotate 90degrees. So should I remove all constraints to run dynamic simulation? I attatched 2 photos to show the starting position (travel position) and ending position (working position).
View 7 Replies View RelatedI'm trying to write a script which would process all the ipt files within assembly and launch certain functions according to a ipt file type.
I've already made such script for dimensioning parts which work for standart parts but not for metal sheets.
Here it is:
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments If oSubDoc.DocumentType = kPartDocumentObject Then Dim oPartPropset As Inventor.PropertySet = oSubDoc.PropertySets("Design Tracking Properties") Dim oPartParam As Inventor.PropertySet = oSubDoc.PropertySets("Inventor User Defined Properties") Dim oParameter As Parameter For Each oParameter In oSubDoc.ComponentDefinition.Parameters oParameter.ExposedAsProperty = True Next oParameter If oSubDoc.SubType = "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}" Then Dim d1 = Round(SheetMetal.FlatExtentsLength, 1) Dim s1 = Round(SheetMetal.FlatExtentsWidth, 1) Dim g1 = Round(Parameter("Grubość"),1) FindOrCreateProperty("Długość [mm]", d1, oSubDoc, True) FindOrCreateProperty("Szerokość [mm]", s1, oSubDoc, True) FindOrCreateProperty("Grubość [mm]", g1, oSubDoc,
[code]....
this code distinguishes parts from sheet metal, and launches appropriate functions to get their dimmensions. It just doesnt work for metal sheets somehow. Seems like SheetMetal.FlatExtentsLength is performed from within the assembly, not part as it should be. I must have the addressing wrong. I've tried many things and different functions but nothing works for sheet metal parts.
This code might also be useful for different purposes. I'm also trying to lunch some external scripts for each part within an assembly, but there is no direct function for that (there is one only for internal scripts , based within the file).
The company I work for has requested what PC specifications Autodesk recommends for use with inventor. We are currently using 2011 but would like to have the recommendation for the latest release. We are having major issues with crashes, and running out of memory constantly on working with images as well as routing tubes in assemblies. Any recommendations for PC specifications I should report?
View 9 Replies View Relatedi am wanting to use the apprentice server in another program. The apprentice server is 'normally' found in the registry under this key:
ComputerHKEY_CLASSES_ROOTCLSIDC343ED84-A129-11d3-B799-0060B0F159EF
The problem is, that if you uninstall all things autodesk, and run a registry cleaner (or delete that key by hand), and then install only inventor view 2013 and run inventor view 2013, it will *not* create that key in the registry.
This makes it impossible to run the apprentice thru the COM mechanism, even your SDK samples will not work.
(i suspect (but havent proved), the bigger problem is on a brand new machine, install and run only inventor view 2013 , you still can't use the apprentice server.)
The 'workaround' is to install and run inventor view 2012. running inventor view 2012 will create the registry key. After that, running inventor view 2013 will happily update the key's value to the appropriate place.
(C:Program FilesAutodeskInventor View 2013BinRxApprenticeServer.dll)
so try this :
1) run regedit and delete the key and all its subkeys
ComputerHKEY_CLASSES_ROOTCLSIDC343ED84-A129-11d3-B799-0060B0F159EF
2) optionally install inventor view 2013 ('as administrator' or not doesnt matter).
2) run inventor view 2013 ('as administrator' or not doesnt matter). exit it
3) run regedit. the key is not there still. you won't be able to run any SDK samples or get an apprentice server using the following 'basic'
Set ApprenticeServer = New ApprenticeServerComponent
i'm on windows7, x64. (iv2013 is: build 126, Release: 2013 RTM)
is a bug in 'inventor view 2013', or is that intended for some strange reason?
I am having a problem with Inventor 2013. Every time I run/edit then run an iLogic rule my Inventor crashes. I have sent the report in to autodesk, but I need a fix for now.
I have tried a soft reboot, hard reboot, only opening inventor while no other programs are running, disconnection from the internet, etc.
Im quite new to customizing inventor and have been playing around with I-logic. I can get I-logic to enter values into existing ipt paramaters when run from a rule within the idw. I can also get I-logic to create a custom Paramater within the ipt using some copied API code, however I dont know my way around API at all yet. So...
I was wondering if it was possible to create a custom part parameter from an ilogic rule run in an idw with that ipt featured?
I'm a contractor, I've created a really impressive form-driven assembly containing various iLogic rules. However, as i add more rules it is beginning to slow down (increase rule processing time). Should I suggest upgrading to 64-bit and increasing RAM?..could be costly with no increase in performance.
Processor: i7-2600
OS: 32-bit
RAM: 4.00GB
Inventor 2012
We have some weird printer issues here and i'm wondering if there is a config option within the print manager to set for simplex or duplex printing. I've looked in programming help and couldn't find anything as well as googling it. Looking for a oDrgPrintMgr.Duplexprinting=NO or something similar.
oDrgPrintMgr.ScaleMode=kPrintFullScale
oDrgPrintMgr.ColorMode=kPrintColorPalette
'oDrgPrintMgr.PaperSize = PaperSizeEnum.kPaperSizeDSheet
oDrgPrintMgr.PrintRange=PrintRangeEnum.kPrintAllSheets
'oDrgPrintMgr.Orientation = kLandscapeOrientation
oDrgPrintMgr.PaperHeight=ActiveSheet.Height
oDrgPrintMgr.PaperWidth=ActiveSheet.Width
Does Inventor use the mouse double click speed settings from windows? I have set my windows double click to be quite slow but am finding I have to double click in Inventor a number of times before it works. I presumed I was clicking to slowly. Changing the setting in windows did not work?
View 1 Replies View RelatedI am using 2008. In previous releases I was able to double click on a feature in the tree and edit any dimension I wanted to, including the "extrusion dim". If I wanted to just edit the extrusion, I would RMB and edit feature. Now when I DBL Click in the tree, it is the same as the RMB used to be. Now to edit any dim other than the extrusion, I have to edit sketch.
View 9 Replies View RelatedHow to model a double pitch chain with sprockets so that it can be animated to show visual movement/rotation.
This chain assembly is made up of 6 sprockets.
Using VB2010 Express to practice writing code to run things in Inventor 2012. I am an extreme beginner at this, and I am trying out a simple program that opens up Inventor, and when you click a button, it will open up the filename listed in the subroutine. I have attached a .jpg of my code. The program will open Inventor, and open the file, but as soon as the file is finished loading and displays on the screen, it throws the error you see in the .jpg.
View 2 Replies View RelatedMy add-in is working fine in Windows 7 with or without Run As Admin.
I have created my add-in using VS 2010 SP1.0.
Now, if I try to launch Inventor(w/o Run As Admin i.e just double click) 2014 SP1.0, in Windows 8, my add-in works fine.
If I launch Inventor with Run As Admin, My add-in stops receiving call backs from Inventor.
I have a rule in the top assembly to update & want to run this as a final 'clean up' after various rules have run in sub assembly parts.
I have a rule within a part at the end of the line. I want this rule to goto the top assembly & run the 'Update' rule.