My add-in is working fine in Windows 7 with or without Run As Admin.
I have created my add-in using VS 2010 SP1.0.
Now, if I try to launch Inventor(w/o Run As Admin i.e just double click) 2014 SP1.0, in Windows 8, my add-in works fine.
If I launch Inventor with Run As Admin, My add-in stops receiving call backs from Inventor.
I HAVE THE SAME PROBLEM, BUT THE FIX IS NOT WORKING IN AUTOCAD 2012
View 2 Replies View RelatedRevit 2012 stopped running for user with admin rights 100% of the times. Computer is 64 bit 4 core processor 8 logical cores and 8.0GB ram.If I right click on the Revit icon and select "Run as Administrator" will will launch 50% of the time and runs OK.
View 1 Replies View RelatedI have created a basic add-on that shows a modal windows form. The only issue I am running into is that I am completely unable to capture any key events in the form. I just want to make the escape key close my form, but I'm having no luck. Here is my basic setup:
<CommandMethod("myCommand")> _Public Sub myCommand() Dim myForm As Form1 = New Form1Autodesk. AutoCAD. Application Services. Application.ShowModalDialog(myForm)End Sub
Then in the form code, I have this, for testing purposes:
Private Sub Form1_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles Me.KeyPress MsgBox("keypress") End Sub
I've also tried KeyUp and KeyDown. Key presses are working inside the form (I can use the keyboard to select an item in a combobox, for example), but I never hit the event handlers.
we have a dilema regarding Backburner 2013:
I work at a studio and we want to buy new servers and we want to purchase Windows Server 2012 wich, from what we read is based on Windows 8 architecture. We read BackBurner 2013's specification and Windows 8 didn't appear as supported.
Our question is: If we buy Windows Server 2012 Enterprise for the render farm will it work with Backburner 2013 without any problem?
Ihave CS3 extended running on Vista.Program ran find for months until yesterday, Whenever I try to open a picture file CS3 stops working and shut down. It doesnt matter what type file. I removed program amd reinstalled, still got same probelem. Any suggestions on how to solve?
View 10 Replies View RelatedI installed X6 today and when I got to start the program it stops running immediately. When I click on the icon the start up window appears but then freezes on "Creating Application Environment" and then just stops running. I am trying to run x6 on a relatively new hp pavilion g6 laptop.
View 3 Replies View RelatedI have a users who cannot change parameter values for iLogic unless user is a local admin on the workstation. This machine has just been upgrade to Inventor 2013.
View 1 Replies View RelatedHow to "grab" the print event (Ctrl-P, File Print or Print icon) from an add-in. I would like to force the user to add some information about the print in a dialog before printing a drawing.
I can't find any application or document events fired when printing like OnSaveDocument, OnQuit in the object browser.
I have obtained a very useful macro from another discussion thread, [URL]....... It automatically names the frame members inserted by Frame Generator. I have modified the macro for our internal naming conventions, but the basic functionality is the same. I would like it to load automatically whenever I am in Inventor and believe an Add-In is the way to go. I have followed Brian Ekins "Taking the Step from VBA to Inventor Add-Ins" paper, but I think I am missing huge chunks on how Add-ins handle events and have been unsuccessful in finding any help topics. How to handle events in an add-in.
View 7 Replies View Relatedhow you put the rule in but is there a way to remove the rule. I put one in and I don't like how its acting and would like to remove the rule from the list but I see no way do do so...
View 6 Replies View RelatedWe have been running Windows XP-Pro (32 Bit) withAutocad Mechanical 2011 using a Calcomp Drawing Board-III and the TWSER2kXp.exe driver, everything is running fine. We want to switch over to Window-7 running 64 Bit and I want to know if our older driver will work as before and if not what driver do I need to use to define the tablet areas of the menu and be able to use our 16 button pucks.
View 4 Replies View RelatedI am in need to select a profile path using interaction events. How can it be done? Is there any filters available for a Profile Path Selection?
View 9 Replies View RelatedI wrote a small script in python to write dxf files out. I want to add this to a button on the ribbon. I got that sorted out and can get my button to appear where I want it. I am having trouble calling the script from the button though.
The API tells me that the button has an OnExecute() event that I should listen for to call my script. I have been searching on how to do that from python but I haven't had any luck.
When I click the Escape button, All the selection events are stopped working. Please follow the steps below reproduce.
1. Create the Select Events Object using the following steps.
m_pCommandManager->CreateInteractionEvents(&m_spiInteractor);
m_spiInteractor->put_SelectionActive(VARIANT_TRUE);
hr = m_spiInteractor->get_SelectEvents(&m_spiSelectEventsObj);
m_spiSelectEventsObj->put_Enabled(VARIANT_TRUE);
m_spiSelectEventsObj->PutWindowSelectEnabled(VARIANT_TRUE);
[code]....
2. Open the part and Select any face in the model.
I get the following event.
STDMETHODIMP CSelectionEventHandler:nEvent_OnSelect(ObjectsEnumerator * JustSelectedEntities,SelectionDeviceEnum SelectionDevice, Point * ModelPosition, Point2d * ViewPosition, View * View )
3. Now click on the Escape button. Now if you try to select any face , no call back is received.
I have ACA 2013 (student version) running in the Windows 8 environment. I cannot open anything drawn in a previous release nor can I open a drawing created in ACA 2013 that was installed on the Windows 7 platform.
I have tried to drag in the drawings through design center. That worked for a while now when I try that it causes ACA to crash. Also I have tried multiple drawings that were created in several different versions of ACA. (2004, 2006 and 2009)
As a side note I was able to open those files in ACA 2013 running on the Windows 7 OS.
I installed PSE11 on Windows 8 machine and it ran fine once. Now it launches and I see it starting then dissapears. I think it is running in backround as i see it in task manager. I ran the compatability trouble shooter and used the recommended settings but problem persists. Also tried running as adminestrator and still same problem. The auto uploader runs fine as well but then I cant see organizer. I had the same issues with PSE10 but that ran fine on this same machine for a month. My problems started when i left PSE10 running and let the computer sleep, hybernate and eventually shut down. Ever since then PSE 10 and now PSE 11 wont run or runs in backround and I cant see them. I have unistalled and re-installed bioth to no avail. Do I need to do a PC recovery?
View 5 Replies View RelatedI recently upgraded to Windows 8 and now Photoshop is not functioning as normal when running on Windows 7. Mainly when a modification is made to an image i.e, cropping, unsharp mask, etc. the image will be blacked out, requiring clicking on the canvas area to reacquired the image. Also the canvus changes from my neutral gray setting to a grid or black background when modifications are performed. I reinstalled Photoshop CS6 Ex after the new Windows 8 installation.
View 1 Replies View RelatedWhat is considered the best processor for running CS6 on Windows 7 64bit Pro.
View 3 Replies View RelatedWe have 4 PCs and 3 macminis here at work. All have 3ds max 2012 installed on them.
I can see the macminis in the backburner queue monitor. I turn the server on all the available machines and only the lum-pc, renderfarm01 and russell01 are available to render (these are the PCs). The mac minis remain idle. I cannot use them to render.
However, if I turn on manager on one of the macminis, and turn on server on all the other machines, the macmini running the manager can only see the other macminis. This does not make sense as I've installed full 3ds max on these mac minis so they should be good to go.
Elements 6 will not run on computer runing windows 7
View 2 Replies View RelatedI originally installed my CS5 on a computer running Windows Vista & it worked great. I just got a new computer running Windows 7, installed my Adobe Photoshop Elements & CS5 on it, but now it doesn't work properly. When I click on the right hand triangle at the bottom of any of the tools, it doesn't open to show the different tools like it used to.
View 5 Replies View RelatedHow do I transfer CS2 from a Vista pc which has died to a new pc running windows8
View 1 Replies View RelatedI recently bought a Dell 1720 laptop that had such a poor display that I
returned it. Can anyone here recommend a good Windows laptop for running
Photoshop and Illustrator.
I have two questions:
1. I can open PS Elements and can open "Organize", but when I try the "Edit", it shuts down the program. Think a file may be corrupt. I live in Canada and in Australia for 3 months so don't have access to my DVD to re-install.
2. If needed, I may have to buy new software. I am running PS Elements Primere 10 on my Mac desktop at home. Can I upgrade to PS Elements 12 on my laptop on the Mac side?
I'm having trouble migrating the file from my XP machine to my new Win7 machine?
View 1 Replies View RelatedOk just took the leap to Windows 8 and when reviewing the Reliabity Report in Windows PSE11 is showing up as stopped working, and it is causing some performance issues. it is because I dont have Quick Time installed. Installed Quick Time still have the problem.
View 1 Replies View RelatedAm I the only one having trouble with the brush tool using a touchscreen running Windows 8? The touch feature doesn't work at all, and the mouse is intermittent, at best.
View 1 Replies View RelatedI've checked the Windows 7 Task Manager and Bridge CS5 does not appear. can finish the install?
View 2 Replies View RelatedWill Creative Suite CS3 Design Premium work on Windows 8 ?
View 1 Replies View RelatedI am trying to edit several RAW images in PSE 11 on my new PC running Windows 8.1.
When I try to open one of the images from my Nikon d5200, I see a pop up that says I need Camera Raw documentation. I assume that this means a download. Looked at the list available & did not find one