AutoCAD Inventor :: Clicking Escape Button Disables Selection Events?
Nov 25, 2013
When I click the Escape button, All the selection events are stopped working. Please follow the steps below reproduce.
1. Create the Select Events Object using the following steps.
m_pCommandManager->CreateInteractionEvents(&m_spiInteractor);
m_spiInteractor->put_SelectionActive(VARIANT_TRUE);
hr = m_spiInteractor->get_SelectEvents(&m_spiSelectEventsObj);
m_spiSelectEventsObj->put_Enabled(VARIANT_TRUE);
m_spiSelectEventsObj->PutWindowSelectEnabled(VARIANT_TRUE);
[code]....
2. Open the part and Select any face in the model.
I get the following event.
STDMETHODIMP CSelectionEventHandler:nEvent_OnSelect(ObjectsEnumerator * JustSelectedEntities,SelectionDeviceEnum SelectionDevice, Point * ModelPosition, Point2d * ViewPosition, View * View )
3. Now click on the Escape button. Now if you try to select any face , no call back is received.
View 3 Replies
ADVERTISEMENT
Aug 31, 2011
I just loaded 2008. With cleanscreen on, the close "X" button is grayed out and inop. Also, the minimize button which is still operable does not fully minimize AutoCAD. How can I get these buttons operable in cleanscreen mode?
View 9 Replies
View Related
Apr 1, 2013
I have a website banner made in edge with links to other pages of the site. The banner itself is within an iframe (Generally I avoid iframes but I had no option with this one). If you click a link, it will take you to the right page. However if you click the browser's back button, the original page begins to load but quickly redirects you forward again, thus virtually removing the back buttons functionality. However if I click "back" a second time, it works.
Â
Another peculiar thing is that when the page loads, the contents of the page that I am navigating to start to load within the iframe before it redirects. I tried adding "_parent" as a target attribute to all my links but the problem remains. Does edge automatically detect iframe usage and assign link targets to the _parent frame with jQuery?
View 1 Replies
View Related
Jun 27, 2006
How do I set the focus from page1 to page2 by clicking a command button?
View 4 Replies
View Related
Oct 28, 2012
IÂ am developing a custom toolpalette, with a toolstrip and buttons on it. The botton asks user to select a point on the screen. But when the button is pressed it gets focus and tu user has to first click on the screen first to activate it and another click to select the point.
BringWindowToTop(Acad.HWND32)
BringWindowToTop(Doc.HWND32)
BringWindowToTop(Autodesk.AutoCAD.ApplicationServices.Application.MainWindow.Handle.ToInt32)
[Code]....
Windows 7 (x64)
AutoCAD 2012 (x64)
View 6 Replies
View Related
Mar 17, 2012
I have an assembly with a half hour or so of unsaved work into it.
I downloaded an IGES model and initiated a Stitch Surfaces command.
15 minutes later . . . here I sit.
AUTODESK: add Escape to Cancel current operation!
View 6 Replies
View Related
Oct 24, 2012
show me an event handler (or whatever is needed) for bailing out of an AddIn? I'm using VB.net. The end users would prefer to use the ESCAPE key for this.Â
View 5 Replies
View Related
Oct 26, 2013
When I open Lightroom 5 and click the import button I notice that the thumbnails that appear are not of the same size.
Why?
1) The phots are all 6x6 square
2) The photos are all TIFF format
3) The photos are of similar size approximately 136 MB each
See capture of my screen as opened in lightroom 5.
View 1 Replies
View Related
Mar 16, 2014
I have made a pause and a play button to my slideshow.The pause button is just a boks with the click-action code:
Â
sym.$('btn').click(function(){
         sym.stop();
});
Â
The pause button is a boks with the click-action code:
Â
sym.$('btnPlay').click(function(){
var timelinePos = sym.getPosition();
         sym.play(timelinePos);
});
Â
It works but in the beginning, I have to click twice before the function works. It is only the first time. After that everything works fine.
View 2 Replies
View Related
Mar 11, 2013
I have an animation with 5 different parts. I would like to trigger a random part when clicking on a button.
In order to do that I put labels on all parts (play1,...,play5). Then I put a code on the button on the click event :
Â
var RandomNb=Math.floor(Math.random()*5)
if(RandomNb=1){sym.play("play1");}
Â
It is just a simple test but it does not work : the animation play1 is always played no matter the value of RandomNb. I obviously make something wrong but I don't know what...
View 2 Replies
View Related
Apr 26, 2013
how can I get a Random Number in a Text by clicking a button?
Â
For example: I have an already animated object [a dice] as button and I have a Text object located on other part of the stage and where should appear the random number from 1 to 6.
Â
I have tried in CreationComplete and compositionReady, and in the Click option in the button, one of these two options:
Â
Math.floor((Math.random()*6)+1);
var ran_number=Math.floor(Math.random()*5;
Â
I have also tried in the dice image [button] within the symbol this [with one of the two previous codes]:
Â
sym.getComposition().getStage().$("text").html(ran_number);
Â
And it doesn't work anyway. Right now I'm basically lost. That would be like:
1.- start your computer.
2.- open Edge.
View 7 Replies
View Related
Jan 30, 2013
i have a problem with an animation in Edge Animate. I try to animate a button which spins 45° on mouse over and back on mouse out. So far no problem. Now i want the button to spin 90° when i click on it and let it stay on this position. I made it spin the 90° but it always spins back on mouse out because the event is still there. Is there any possibility to delet the mouse out event or pause it after clicking on the button. I already tried remove it but without any sucess.
View 4 Replies
View Related
Nov 6, 2001
How to "grab" the print event (Ctrl-P, File Print or Print icon) from an add-in. I would like to force the user to add some information about the print in a dialog before printing a drawing.
I can't find any application or document events fired when printing like OnSaveDocument, OnQuit in the object browser.
View 5 Replies
View Related
May 22, 2008
I have obtained a very useful macro from another discussion thread, [URL]....... It automatically names the frame members inserted by Frame Generator. I have modified the macro for our internal naming conventions, but the basic functionality is the same. I would like it to load automatically whenever I am in Inventor and believe an Add-In is the way to go. I have followed Brian Ekins "Taking the Step from VBA to Inventor Add-Ins" paper, but I think I am missing huge chunks on how Add-ins handle events and have been unsuccessful in finding any help topics. How to handle events in an add-in.
View 7 Replies
View Related
May 9, 2012
how you put the rule in but is there a way to remove the rule. I put one in and I don't like how its acting and would like to remove the rule from the list but I see no way do do so...
View 6 Replies
View Related
Apr 26, 2013
sometimes when using constraints the "movable" part is fixed after adding the first constraint.
If i use i.e. a surface to surface constraint the movable part should be free to slide on the surface.
To move the part in this case  I have to add further constraint or delete the old one.
Furthermore sometimes constraints in assemblys do not update automatically. I have to click on the part and try to move it away. After releasing the part the consraint will be updated.
Are there any options to control or better change this behavior?
I am using Inventor 2013+Vault 2013.
View 5 Replies
View Related
Jun 21, 2007
I am in need to select a profile path using interaction events. How can it be done? Is there any filters available for a Profile Path Selection?
View 9 Replies
View Related
Jun 21, 2012
I wrote a small script in python to write dxf files out. I want to add this to a button on the ribbon. I got that sorted out and can get my button to appear where I want it. I am having trouble calling the script from the button though.
The API tells me that the button has an OnExecute() event that I should listen for to call my script. I have been searching on how to do that from python but I haven't had any luck.
View 2 Replies
View Related
Nov 26, 2011
I just noticed a serious UI issue. Say I'm zoomed in and am creating acomplex freehand selection. I'm now selecting stuff at the very top ofthe canvas, and I happen to miss a bit and touch the 'ruler'. Suddenly,GIMP switches to the move tool and I've lost the whole selection! Does this behaviour can be turned off?
(I know I can turn off the rulers, but it's annoying having to turn themoff and on all the time since they are sometimes useful.)
View 3 Replies
View Related
Mar 21, 2013
I am having trouble with my CS3... have used for a number of years. It won't open a file. I click file, open.. and the selections go grey. I have uninstalled and re-installed and it does the same thing. I have re-installed on my data drive so there is plenty of room. I have 3.5 gb memory.. nothing else open.Â
View 2 Replies
View Related
Nov 27, 2013
My add-in is working fine in Windows 7 with or without Run As Admin.
I have created my add-in using VS 2010 SP1.0.
Now, if I try to launch Inventor(w/o Run As Admin i.e just double click)Â 2014 SP1.0, in Windows 8, my add-in works fine.
If I launch Inventor with Run As Admin, My add-in stops receiving call backs from Inventor.
View 6 Replies
View Related
Jan 16, 2012
I'm zoomed in and am creating acomplex freehand selection. I'm now selecting stuff at the very top ofthe canvas, and I happen to miss a bit and touch the 'ruler'. Suddenly,GIMP switches to the move tool and I've lost the whole selection! How this behaviour can be turned off?
(I know I can turn off the rulers, but it's annoying having to turn themoff and on all the time since they are sometimes useful.)
Is there a way to make rulers be off by default when I start Gimp? Iknow it's just a matter of clicking ctrl+shift+r, but that's easy to saywhen you've just lost a huge, painstakingly made selection …
View 2 Replies
View Related
Apr 24, 2009
I have been trying to create a button set with a foreground shape. What I am trying to accomplish is when this guy creates a selection with pen tool and deletes part of gradient from the button set, this gives it a shape/theme to the button set – This way I can create any shape on the buttons and they look like a theme. (maybe I am not explaining well but you get the idea) Where I am stuck is when I select all buttons and apply gradient to all, it only applies to a single layer (button) instead of all even though I can see all selected. Also when I make selection with pen tool and delete the gradient, it deletes from only one.
View 2 Replies
View Related
Apr 2, 2013
Something I have found useful in day to day drafting is changing the F1 key to a secondary escape button. This way you won't have to wait for the help window to appear.
View 2 Replies
View Related
Apr 28, 2011
I'm trying to use GIMP on Ubuntu 10.10 (Maverick), installed using the regular packages. It seems to work fine apart from one problem: when I make a selection with e.g. the rectangle selection tool, there's no visible feedback of how big the selection is, only the cursor is visible(couldn't take a screenshot while the mouse button was clicked, but tried to show it at [URL] ......).
If I try to resize a rectangle, the inside purple line moves, while the outside purple line stays where it was (instead of showing how big the new rectangle will become when I release the mouse button).
Also, possibly related, there are sometimes purple artifacts from old selections.
View 3 Replies
View Related
Dec 17, 2013
I have a vb.net Autocad add-in which runs an iterative routine with a while..wend loop that often takes a few minutes to finish. The routine is very stable and always restores user control eventually, but if the user hits the escape key while it is running, a fatal error occurs in acad.exe.
if there is a way to detect that the escape key has been pressed so the routine is exited?
View 3 Replies
View Related
Feb 22, 2012
I have a patterned extrusion in a part. I need to supress the first occurrence in this pattern but the option to do so in the context menu is not available when right clicking the 1st occurence The remaining occurrences are suppressible. Is this normal behavior when patterning in a part file?
View 2 Replies
View Related
Mar 28, 2013
I have a flexible sub-assembly in my top assembly. Sometiems I'm trying to demonstrate to others how a mechanism in the sub-assembly works using this flexibility feature. It works great, but when I move just one little part of a flexible assembly, Inventor displays the wire-mesh of the entire flexible assembly, because technically the entire assembly is selected, even though I'm only moving one part. It clutters up the screen very badly, detracting from what I'm trying to show.
Is there a way to prevent Inventor from displaying the selection lines? Either only when I'm moving a part in a flexible assembly (which would be great), or to just turn them off completely when I'm presenting like this? I know I can turn off pre-select, but that doesn't work, because once I start moving a part in the flexible assembly, the assembly is "selected" and the wire-mesh displays.
View 3 Replies
View Related
Jan 3, 2012
Any way to trap when the user hits the escape key without a user input function. The idea is to loop infinitely and perform some analysis until the user hits the escape key.
I suppose I could do the same thing with a form but I would not.
View 1 Replies
View Related
Nov 4, 2013
I have program with do...loop while
I draw line(they are also block) but, when I press right click it doesnt exit sub?
how can I exit sub when I press escape or right click?
2 question:Â
When I press escape my programme add a new line. but I dont want it to add my draw. how Can I solved this issue?
3. question
I want to draw a line with temporary dimention( as you see picture) is it possible?
4 question
is appear any icon when I get on my line block ?( **** yo see on picture )( green plus)
picture02
Â
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.DatabaseServicesImports Autodesk.AutoCAD.GeometryImports Autodesk.AutoCAD.EditorInputImports System.Windows.InputImports
[Code]....
View 2 Replies
View Related
Oct 7, 2010
Yesterday I was cruising along as normal when all of the sudden my escape key stopped working. Â I believe it happened after I accidentally loaded the dbconnection manager or something similar but not sure. Â When I envoke a command, the escape key does nothing. Â When I select something and hit the escape key, it doesn't deselect everything. Â I know it's not my keyboard because I'm using a laptop and both the attached keyboard and the keyboard on the laptop function the same in that the escape key doesn't work. Â I also have a Logitech Performance MX with a button set as the escape command and that doesn't work. Â When I type in cancel or ^c^c, the response is "unknown command". Â
View 9 Replies
View Related
