I just loaded 2008. With cleanscreen on, the close "X" button is grayed out and inop. Also, the minimize button which is still operable does not fully minimize AutoCAD. How can I get these buttons operable in cleanscreen mode?
View 9 RepliesWhen I click the Escape button, All the selection events are stopped working. Please follow the steps below reproduce.
1. Create the Select Events Object using the following steps.
m_pCommandManager->CreateInteractionEvents(&m_spiInteractor);
m_spiInteractor->put_SelectionActive(VARIANT_TRUE);
hr = m_spiInteractor->get_SelectEvents(&m_spiSelectEventsObj);
m_spiSelectEventsObj->put_Enabled(VARIANT_TRUE);
m_spiSelectEventsObj->PutWindowSelectEnabled(VARIANT_TRUE);
[code]....
2. Open the part and Select any face in the model.
I get the following event.
STDMETHODIMP CSelectionEventHandler:nEvent_OnSelect(ObjectsEnumerator * JustSelectedEntities,SelectionDeviceEnum SelectionDevice, Point * ModelPosition, Point2d * ViewPosition, View * View )
3. Now click on the Escape button. Now if you try to select any face , no call back is received.
I have a website banner made in edge with links to other pages of the site. The banner itself is within an iframe (Generally I avoid iframes but I had no option with this one). If you click a link, it will take you to the right page. However if you click the browser's back button, the original page begins to load but quickly redirects you forward again, thus virtually removing the back buttons functionality. However if I click "back" a second time, it works.
Another peculiar thing is that when the page loads, the contents of the page that I am navigating to start to load within the iframe before it redirects. I tried adding "_parent" as a target attribute to all my links but the problem remains. Does edge automatically detect iframe usage and assign link targets to the _parent frame with jQuery?
Been using CS6 PS since Beta. No problems till 13.1.1 came out. I'm in Full Screen Mode 95% of the time and 100% when I'm retouching.After the most recent update OpenGL funtions will become disabled when I go to Full Screen Mode. This is very annoying! My MBP is connected to a 30in Dell Ultra.
Here is my System Info
Adobe Photoshop Version: 13.1.1 (13.1.1 20121213.r.223 2012/12/13:23:00:00) x64
Operating System: Mac OS 10.8.2
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2300 MHz
[code]....
I'm trying to create a menu macro to close and dont save the drawing without it prompting me.
View 1 Replies View RelatedIt has happened repeatedly, but on different occasions, that the close file X that should be in the top right position of the drawing has vanished. In other drawings that are open at the same time the X in present...Switching between drawings often brings the X back, but this is a weird bug that was not present before the 2012 release.
win 7 IV 2012 suite + Vault
After I close C3D 2012 I get this button,
Why? It doesn't seem to be affecting anything, but it's annoying.
Any way I can get rid of it?
I am very new to Flex/Flash/Illustrator. Using Illustrator CS5.1, Flex 3.6 SDK in Flash Builder 4.5, and Visual Studio 2010.I am developing a hybrid plugin for Adobe Illustrator. The plugin is C++ and interfaces with a hardware device and an UI extension built on Flex/Flash. It uses the CSXS library (version 2.0 based on Flex 3.4 SDK) to perform the communication between the extension and the plugin.
When the UI extension closes, I need the plugin to perform some tasks. These tasks might be related to Illustrator and/or to the device it communicates with. If the UI is closed using a button I add to the UI, the plugin runs the tasks as needed. If the UI is closed using the 'X' button in the corner of the window, I can not get the CSXS interface dispatch events to carry over to the plugin. This is the same dispatch events used from the UI button that I manually created and works fine.
I have tried capturing the exiting event from the NativeApplication and I do see myself entering the associated function to that capture. The dispatch events run but I do not enter the corresponding functions in the plugin.Below is one of several attempts at making this work (believe this was found on the Adobe forums):
public function init() : void
{
NativeApplication.nativeApplication.addEventListener(Event.EXITING, windowedapplication1_closingHandler);
}
protected function windowedapplication1_closingHandler(event:Event):void
{
event.preventDefault();
//event.stopImmediatePropagation();
CSXSInterface.getInstance().dispatchEvent(new CSXSEvent("com.testui.events.closing", CSXSEventScope.APPLICATION));
}
Again, windowedapplication1_closingHandler will process but the dispatched event is not seen by my plugin (when the 'X' is clicked).Is there a way to disable/hide the 'X' in the corner of the window?Am I not properly "capturing" and "halting" the exit event?Should I move away from the CSXS Library and use sockets to perform this communication (though the closing of the extension may have the same affect on the socket communication)?I am currently working on Windows 7 64-bit (if that matters) but the plugin will have to work on Mac too.
Unlike other programs, this one closes the application rather than a window.
View 2 Replies View RelatedWhen I use my layer control and the pop up opens to changes layer or add layer, it will not give me the "x" to close the screen. I am figuring out to close the screen.
View 2 Replies View RelatedI have seen a reference to the auto close gaps button on the toolbar of CorelDraw.I need something like that, because whatever I do I cannot fill my lineart with the smartfill tool, even though I have closed all the gaps, as far as i can tell.
I am wondering if there is a problem with my Coreldraw X5 Software.I am using it on an iMac with Parallels.
i just subscribed to CC as a student, and i cant get photoshop or illustrator to open. the splash screen loads and goes through, and you can see illustrator and photoshop both open, but close a few seconds later with no prompts or errors. i browsed around and saw something about verdana font, but i have it installed.
Edit: i am running windows 8.1
I accidentally hide that bar at top of screen that lets me hide/close multiple documents... I pressed something, but I don't know what - it's tough to hide PS now (Version CS6)
View 7 Replies View RelatedI cannot close my editor window /screen in elements11 as it seems to be frozen and chimes everytime I hit a key.
View 3 Replies View RelatedI am developing a custom toolpalette, with a toolstrip and buttons on it. The botton asks user to select a point on the screen. But when the button is pressed it gets focus and tu user has to first click on the screen first to activate it and another click to select the point.
BringWindowToTop(Acad.HWND32)
BringWindowToTop(Doc.HWND32)
BringWindowToTop(Autodesk.AutoCAD.ApplicationServices.Application.MainWindow.Handle.ToInt32)
[Code]....
Windows 7 (x64)
AutoCAD 2012 (x64)
I am using Video Studio X6 trial and the Screen Capture feature does not work.The capture window opens but the Capture Button is grayed out along with the Sound Source button.
I am running this on an XP SP3 system with -
4 GB memory
2.66 Ghz dual core processor
Is there any information available as to what requirements my system may not have? All other programmes run OK on the computer.
I had this installed on another computer prior to it being stolen, got a new laptop and installed on it. I am running windows 7. When at the welcome screen i click on Edit and the little bar changes and acts like it is going to start but then does nothing, it just takes me back to the welcome screen. I did find one thread on here and tried those recommendations by holding down the ctrl, alt, and shift while clicking edit and then choosing yes but that didn't work.
View 1 Replies View Related why Undo might disable DocumentCollection reactors?
It has something to do with me undoing the annotation scale as when I remove the line
db.Cannoscale = tstAnnoScale
The problem doesn't occur.
sometimes when using constraints the "movable" part is fixed after adding the first constraint.
If i use i.e. a surface to surface constraint the movable part should be free to slide on the surface.
To move the part in this case I have to add further constraint or delete the old one.
Furthermore sometimes constraints in assemblys do not update automatically. I have to click on the part and try to move it away. After releasing the part the consraint will be updated.
Are there any options to control or better change this behavior?
I am using Inventor 2013+Vault 2013.
I am the only one using C3D 2012 in our office and the other users are complaining that they cannot insert blocks or paste clipboard content into drawings that I have saved from C3D 2012. This is true whether I use "C3D as AutoCAD" or the full C3D functionality. I understand that the newer C3D objects are not compatible with the older version but to my knowledge there are no C3D objects included in the drawings in question.
C3D 2009 users can wblock the drawing contents from the Model tab and each Layout tab, and reassemble those parts. Then they are able to insert blocks and paste content again. It is a very inconvenient solution and we only use it when the situation is critical. It also breaks sheet view linkage to our Sheet Sets when we do the wblock fix.
I've asked the others to try using Design Center or Windows paste (CTRL+V) and see if that works the next time they encounter the problem. I don't have C3D 2009 installed or I would have tested these ideas already. The others will not install C3D 2012 and so far the owner's will not force them to.
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I'm running Windows XP with Photoshop CS6. Since the "Save" button runs off the edge of my monitor, I can't click Save. I also can't move the dialogue box up far enough to get to it before running out of screen space. I tried just hitting the enter key, but nothing happened. I end up having to do a control-alt-delete to get out of Photoshop altogether.I've never had this problem before when I had CS2 or with the CS6 I have at work.Is there a way around this?
View 2 Replies View RelatedI am growing increasinly frustrated. I just installed AutoCAD LT 2013 on my laptop. I managed to get everything customized the way I want, except the button icons on my (classic) toolbar are much too small. If I go into the menu and select 'use large icons', they are too huge. My screen resolution DOES NOT need to be changed or adjusted. I went to the help menu to see what I can do, and found that I can go into CUI and adjust the size of the button icons that way, via the button image editor, however there is no 'button image editor' dialog box when I select any given toolbar command.
View 1 Replies View RelatedI'm using Mac OS X 10.7.2 on an Intel Core 2 Duo IMac. A few months ago I downloaded PhotoShop 5.1 after having used every previous issue of PhotoShop without a problem.
1. Often when I have Photoshop open on my desktop but not actively using it, it will freeze and I'll have to force quit and restart. When I installed the latest version of InDesign and Illustrator they would also freeze when not in use, however removing and resinstalling them seemed to fix the problem for them, but not for Photoshop.
2.I will be working along on a project when suddenly all of the alphanumerical keys on my keypad won't work. I ultimately have to restart the Mac to get them to work again in any program. This never happens with any other program and I have tried othe keypads, even one just out of the box, and it's always the same.
I have removed and reinstalled Photoshop twice, but still the same issues.I have called the Adobe helpline and tried all of their fixes, but it still happens. They resolved that it must be my Mac. But Mac says because it is related to a specific software it is not their problem.
I subscribe to Creative Cloud and while Ai has proven to be exceedingly crashy, Ps CS6 Ext et al, have performed quite nicely..I was working yesterday with Ps, Ai, Id, and Br, all at once, going back and forth from one app to the other (working on an art book) without any problems at all.
All of a sudden, the next day I get the following alert when launching Ps CS6 Ext: What the heck hardware could it be referring to since I have not installed or uninstalled anything at all! My graphics card appears to have more than sufficient memory, as shown below, and do not experience any problems with 3D functions in any other app.I downloaded the latest version of the graphics driver as suggested in the alert but to no avail; .
I'm working on an iMac, OSX (10.7.4) with CS5.1. Ever since I uploaded my new Photoshop program months ago, it disables the alphanumeric keys on my key pad when I use the clone stamp tool. I have to restart my computer in order for my keyboard to work again.
I have talked to Adobe service multiple times, had the software replaced, had a service agent work with my machine from a distance, discussed the problem with Apple (they say it's an Adobe issue), paid a professional to resolve it, reinstalled the software multiple times and ways, worked in safe mode, worked as another user, but the problem persists.
I am a full-time graphic designer with my own business and usually have Illustrator, InDesign and Photoshop all open at the same time, so when I have to restart it is a major problem that I encounter multiple times during my work day.
I wish I had never purchased the upgrade and now fear CS6. What can I do?
I've encountered a strange situation in 9.2.7. If you disable the tabs (uncheck Windows-Show Document Tab) the program doesn't make any backups.
View 4 Replies View Relatedi've just started using photoshop CS4 and noticed today that enabling OpenGL drawing under performance preferences (GPU settings) disables color management for my 2nd dual monitor.
2.4ghz intel core 2 duo, 4GB 667mhz, mac os 10.5.6 (fully updated 1/7/09)
GeForce 8600M GT, 256MB
photoshop cs4
I'm using Lightroom 5 and Photoshop CS5. The problem is that if I apply a custom camera color profile created by X-Rite Passport Color Checker, I can no longer use an external editor, such as Photoshop, to edit my photos. Before I apply the custom profile, the external editor function works just fine. If I apply a custom profile in the Camera Calibration panel, then the ability to use external editors no longer works. There is no error message, but nothing happens when I try to edit in an external editor. If I go back and turn off the custom profile and go back to Adobe Standard, then the external editor function works again. What is going on? Is there a way to make it possible to apply a custom profile in Camera Calibration and still be able to use the external editors?
View 9 Replies View RelatedI have create a small Edge Animate animation that I'm trying to add to our home page. After getting everything running and working properly in IE9+, Chrome, Firefox and Safari I moved it from the development environment to our live site. Then I viewed it on an older machine running IE8 and the down level stage worked great, but it disabled a jquery image slider and a little custom jquery script I wrote to polite load an embedded youtube video. The only cusomization I did to the edge files was to remove the loader for the included version of JQuery so that it would run the on I call from Google instead. This prevent intial conflicts between already existing jquery elements on the page.
View 2 Replies View RelatedThis is on a completely fresh installation of windows 7 x64.Before installing Adobe Creative Suite 5.5 Master Collection x64 autoplay for my camera works, after installation it does not work. If I uninstall it, it works again.Where is this program disabling autorun for devices. Autorun for flash drives works fine, its just the non-volume devices that are affected.
I tried using gpedit and reg keys to re-enable autoplay for the camera but it does not work.When I plug my camera in, I can still go to my computer I can get my pics without any issues, its just that this is bugging me.Don't think there is an answer out there, guess I just need to not be so OCD with this stuff.