AutoCAD LT :: Enlarging Button Icons On Toolbars No Button Image Editor In CUI
Jan 2, 2013
I am growing increasinly frustrated. I just installed AutoCAD LT 2013 on my laptop. I managed to get everything customized the way I want, except the button icons on my (classic) toolbar are much too small. If I go into the menu and select 'use large icons', they are too huge. My screen resolution DOES NOT need to be changed or adjusted. I went to the help menu to see what I can do, and found that I can go into CUI and adjust the size of the button icons that way, via the button image editor, however there is no 'button image editor' dialog box when I select any given toolbar command.
I just installed PSP X5 Ultimate (full install). After it completed it installed an update. All appeared to go fine. I opened the program and went to EDIT. I am familiar with PSP as I have used a number versions up to X2. The first thing I tried to do was crop a photo. The crop tool buttons are not correct. The "Apply", "Crop as new image" and so on under the crop area window are not correct. I see a square of colors. I see the same thing on the main tool bar for the "Copy Special" function and the "Share" button. There could be more that I have not discovered yet. I rebooted and tried again, but get the same thing. Also, the button icons look different each time I load.
Shortly after I loaded PSP X5 on my computer, the picture icons on the buttons in the docking workspace changed and I don't know why. These are the icons at the top and bottom of the Docking area where I work with Layers and also have several other items docked.
I am using PSP X5 version 220.127.116.11
Across the top are the icons for " Edit Selection, Show/Hide Layer effects, Link/Unlink, Lock/Unlock, and Layer Styles".
Aside from being completelly baffled by the new 'Asset Editor' arrangements in 2013, I have just realised that my Manage Tab>Additional Settings drop down> Asset Editor button has disappeared. I am certain it was there before as I have used it and WikiHelp [URL] says so. Whilst I have done a repair on my instalation, it is still absent. See the partial sreen print.
I am attempting to use 3ds Max 2013 at my job, and I have run into a rather painful bug/problem. Every time I open the curve editor, my cursor starts flickering between normal pointer image and hourglass, the buttons in the top of the editor flicker randomly, and I cannot select and type anything in the input boxes in top or bottom. All this flickering lasts for about 10-20 seconds, which is not a long time if it just happened once, but I have noticed that it happens after every time I move a key. What 3ds Max goofed up to cause this problem?
"The Focus icon updates to show the same type of property belonging to any element you select (hence "focusing" on the type of property). For example, if you display the Light property of a spotlight and then select a point light, the property editor is updated to display the Light property of the point light. However, if you then select a geometric object, the property editor is not updated".
Testing this out, it does not seem to work. Even when the focus icon is depressed it refreshes if I select a different type such as a mesh object after a light.
I have a simple scene set up to test it. A point light,a spot light and a cylinder. Basically the scenario in the description. It always refreshes in focus mode. Clicking on the mesh always gives me the mesh properties rather than sticking to the light properties which was selected first and Focus button depressed. Or clicking on a null also shifts to the null properties.
I have a .psd file that was created by someone else for my friends web page. The psd file is the background, logo, and navigational bar for her home page. Each button is a "slice" I think because there are lines around each button on the left side navigational bar (not a true navigational bar just created by buttons) and around the head and body etc. (The lines are blue if that tells you anything - each section is numbered with a little tiny icon that looks a little like the back of an envelope.)
My question - we wanted to change the word on one of the buttons - I did that saved the psd file - no problem. Then I cropped out the button that we had changed. When I saved it to the web (as a jpg) the button looks like a button (a box around it - not a line a raised area that looks like a button.) The other buttons do NOT look like a button (even though the layers are named buttons.)
How can I change it so it looks flat (not button like) like all of the rest of the items on the navigational bar.
I am updating my CUI ribbon for some of my customized buttons. I have changed some of the bitmap images that I have saved in my network folder for the network AutoCAD customization. However, I cannot get the Ribbon to update to show the new button images.
I have opened the CUI, browsed down to the partial CUI for our corporate configuration, then to the "Ribbon", then to the "Tabs", then to the individual section of the tab and clicked on it. Then I click on the specific button in the "Panel Preview" pane to get the properties for that button to show. Then at the bottom of the "Properties" panel, I click on the "Small Image" line to see the three dots that allow you to browse to where the .bmp is stored. I have not renamed the bitmaps, but just modified their color and the way they look. So I have to change the .bmp file to a different location in the small image properties, then change it back to the correct image name. It will update the appearance in the "Panel Preview", but will not update the actual ribbon. I click on "Apply" and "OK", and it still doesn't update the actual ribbon. I have tried closing and restarting AutoCAD after that. As a last resort, I rebooted to see if that would complete the change, but in vain.
I made sure that the network location for the bitmap files is listed in my Options > Support File Search Path (very near the top of the support file list), but that still isn't solving the problem.
How to get AutoCAD to completely forget the old image that is showing on the ribbon and repopulate it with the updated bitmap image?
I have some custom buttons on toolbars and menus which I have created bitmaps for. Ever since I've upgraded to ACAD 2011, the image on the button will not save. I alter the .cui file and I can make the button find it. All looks great, I hit apply and I get no errors. When I close out I am back to the clouded question mark. The button works, but I can't get this to save the image. Also, any time I go into the cui editor, it moves all of my docked and locked toolbars. It gets difficult to have to keep dragging them back. It also keeps bringing up the steering wheel, even though I don't use that.
I added a couple of standard Autocad MAP tabs to a custom panel and in my custom workspace some of the button images don't show up. If I go to the Planning & Analysis workspace, the images are visible, but in the custom workspace, all I get are clouds with a question mark.
I attached two screen shots.
Civil3D 2014 SP1 Win 7 Professional - 64-bit HP Z400 Xeon W3550 @ 3.07Ghz 24GB of RAM Nvidia GeForce GTX 760
I'm trying to make my website look a bit more professional. I want to make the images (in my sub categories) on my website into web buttons with rounded corners to fit a white background & with some depth & gradients etc instead of just flat squares like the buttons I have at the moment
Here a link to the buttons for my sub cats [URL]....
I thought here would be the best place to ask. I know how make buttons from text but I need to make buttons from the images of the sub cats you see on my site.
I just need plain images that look like buttons to use on my EKM powershop..
Tools: Adobe Photoshop CS5 Level of mastery: very novice Goal: Creat Button for a website Environment: Windows Vista
Problem:The following images are buttons has already been designd . One image is in the normal status, while the other button is in the rollver status. I want to create an indetical image with same properties such as (size, font type, font size, font color background color) called "Intuitive Healer". I dont know how to mimic the font and the background colors.
normal status of a button rollover button Intuitve Healer ? normal Intuitive Healer ?Rollover
how to create a button with exact "look and feel" design and write on it Inutive healer
I have an image that is going to serve as an online ad. I would like to have it look like a glass button like so many online ads do these days. However, most tutorials out there give instructions for how to do it with only text over the button. How would I do it if it's got three different sections to it? A photo on the top half and two colors on the left and right on the bottom?
I am trying to create an oval image for a button on a webpage. I make the canvas size about 90x40 and then select the ellipse tool and fill the canvas with it. I then bucket fill the circle/oval with a green color. How do I knock the rest of the white corners out of the image? I only want to green oval to be the final jpg.
3. In the popup symbol, I want the large image map to be remove on the click event of the button: "View another region" . I have the following code which does not work (the image is not removed) resulting in what you see below: