It has happened repeatedly, but on different occasions, that the close file X that should be in the top right position of the drawing has vanished. In other drawings that are open at the same time the X in present...Switching between drawings often brings the X back, but this is a weird bug that was not present before the 2012 release.
win 7 IV 2012 suite + Vault
I'm trying to create a menu macro to close and dont save the drawing without it prompting me.
View 1 Replies View RelatedAfter I close C3D 2012 I get this button,
Why? It doesn't seem to be affecting anything, but it's annoying.
Any way I can get rid of it?
I just loaded 2008. With cleanscreen on, the close "X" button is grayed out and inop. Also, the minimize button which is still operable does not fully minimize AutoCAD. How can I get these buttons operable in cleanscreen mode?
View 9 Replies View RelatedI'm using Premiere Pro CC. I have created a title in title tool and I have added a drop shadow. I can see the drop shadow when I still have the title tool open. Once I close the title tool window the drop shadow disappears? I have tried different fonts nothing seems to work. Don't know what else to try?
View 3 Replies View Related I am very new to Flex/Flash/Illustrator. Using Illustrator CS5.1, Flex 3.6 SDK in Flash Builder 4.5, and Visual Studio 2010.I am developing a hybrid plugin for Adobe Illustrator. The plugin is C++ and interfaces with a hardware device and an UI extension built on Flex/Flash. It uses the CSXS library (version 2.0 based on Flex 3.4 SDK) to perform the communication between the extension and the plugin.
When the UI extension closes, I need the plugin to perform some tasks. These tasks might be related to Illustrator and/or to the device it communicates with. If the UI is closed using a button I add to the UI, the plugin runs the tasks as needed. If the UI is closed using the 'X' button in the corner of the window, I can not get the CSXS interface dispatch events to carry over to the plugin. This is the same dispatch events used from the UI button that I manually created and works fine.
I have tried capturing the exiting event from the NativeApplication and I do see myself entering the associated function to that capture. The dispatch events run but I do not enter the corresponding functions in the plugin.Below is one of several attempts at making this work (believe this was found on the Adobe forums):
public function init() : void
{
NativeApplication.nativeApplication.addEventListener(Event.EXITING, windowedapplication1_closingHandler);
}
protected function windowedapplication1_closingHandler(event:Event):void
{
event.preventDefault();
//event.stopImmediatePropagation();
CSXSInterface.getInstance().dispatchEvent(new CSXSEvent("com.testui.events.closing", CSXSEventScope.APPLICATION));
}
Again, windowedapplication1_closingHandler will process but the dispatched event is not seen by my plugin (when the 'X' is clicked).Is there a way to disable/hide the 'X' in the corner of the window?Am I not properly "capturing" and "halting" the exit event?Should I move away from the CSXS Library and use sockets to perform this communication (though the closing of the extension may have the same affect on the socket communication)?I am currently working on Windows 7 64-bit (if that matters) but the plugin will have to work on Mac too.
Also, can I add text of different fonts and colors in the same image?
View 1 Replies View RelatedUnlike other programs, this one closes the application rather than a window.
View 2 Replies View RelatedI have seen a reference to the auto close gaps button on the toolbar of CorelDraw.I need something like that, because whatever I do I cannot fill my lineart with the smartfill tool, even though I have closed all the gaps, as far as i can tell.
I am wondering if there is a problem with my Coreldraw X5 Software.I am using it on an iMac with Parallels.
Just recently we upgraded from ACAD 2010 to 2011. Some users are still on XP and some are on Windows 7. Since we began making the jump to ACAD 2011, we have begun to notice more and more drawings popping up with blocks no longer visible that were there the day before. When you go to the block editor, the block definition is still there but all of the geometry has been blown away. The only entity that seems to be immune is an attribute. The only commonality among the various drawings this is happening too is that they are all being accessed from an XP machine. Some folks have had to spend hours restoring all the blocks that were lost and that in itself was a challenge because ACAD already saw the definition so it would continue to blow away the geometry. You could purge the block IF you could find a way to pick it and delete it.
View 5 Replies View RelatedWhen I edit my text it disappears. I have attached an image of the problem. This only affects my machine in my company - I have checked colour settings with others and theirs are the same as mine only theirs works
The text is set to white/black colour 7 and the sheet layout is set to white. I have tried different text colours and I still can't see them.
As you can see from the top image I have a background mask that is set to the drawing sheet colour which is white When I double click in the text to edit it the text disappears (bottom image) as if the mask is appearing in front of the text which it shouldn't do.
The only way to be able to view the text is to switch the background mask off - but I want to avoid this as I have to keep switching it on again.
I get the same problem if inserting a new table and having to edit the cells. However here there is no way to switch the background mask off as there is no button that I can see to switch it on and off.
At no specific time when using ACAD 2012 MEP the cursor disappears. cross hairs and all. the only way to get them back is to close ACAD and open it back up.
View 4 Replies View RelatedI created a new pull down menu in AutoCAD 2011 and everytime I close out of AutoCAD or switch workspaces it disappears from the Menu bar. So I type in CUI at the command line and checked the customization window and it shows the menu as being active. I had no problems in previous versions of AutoCAD.
View 4 Replies View Relatedi'm having problem with array tool in acad2012. i draw a line, type array and hit enter. i put everything normally and hit enter when it says Enter to accept. then the line and arrayed object disappears. i don't know what's wrong with it. layers and everything is just as usual.
i did some other arrays in the same file before and they are working with no problem.
If you have more then 1 dwg opened, and you close 1 dwg, wants to close the other dwgs as well?
View 7 Replies View RelatedWhen i use panning in 2D mode the drawing disappears from my viewport. Autocad and all tools are still visible but there is nothing in drawing screen. When i zoom extent(z+e) it comes back again but in a couple minutes it disappears again while i am panning.
View 9 Replies View RelatedSuddenly I got this issue when I draw an area boundary its not possible to close it with "enter" or "spacebar"..
View 9 Replies View RelatedAutoCAD 2010. I was editing a block in the block edit screen and it wouldnt save the block. My screen froze and I had to reboot the computer. Now when I open the drawing it is still in the block edit screen and I cant get out of it.
View 9 Replies View Relatedhow to create a Shortcut key "Alt + c" for "File - close" command? I like the same seeting as my Inventor seeting, and the Inventor is so easy to setup my Shortcut keys use "Tools-Customise-Keyboard".
View 9 Replies View RelatedI used refedit to freeze a couple of items that were nested. My drawing file/machine locked up when I attemped to freeze them. I had to reboot, when I opened the file again I was still stuck in refedit mode. I cannot use refclose to get out our that command. It wants me to use refedit again. I need to get back to my work.
View 4 Replies View RelatedHaving problems when copy/cut and paste. When pasting or inserting a block into a drawing the subject disappears.
View 4 Replies View RelatedI almost always work with multiple drawings in the same Autocad window. Often (maybe 2/3rds of the time?) when I have one drawing maximized inside the Autocad window, the minimize-downsize-close buttons disappear from that drawing's window. The only way to get them back is to cascade the windows.
View 3 Replies View RelatedI have Inventor Series 2011 and regarding my AutoCAD Mechanical 2011 have it updated to Version 3 (Product Version: E.208.0.0).
I am trying to work on some drawing in my AutoCAD and all the sudden the Hatch Creation Ribbon has decide it is going to rule the day. All day, and likely tomorrow too. I am not working on any hatches but why it has popped up. And it WILL NOT CLOSE! If I select the “Close Hatch Creation” panel button on the ribbon, it simply executes the last command that was ran. So, I figure I just close down the drawing and close then restart AutoCAD and I should be good to go. Nope. Reboot the computer. Nope. Soon as I fire AutoCAD back up and open any of my drawings.
When working in Inventor within a Vault environment, you have a check box on the "Check In" dialogue box for "Close files and delete working copies" that once selected, it stays selected until the user unchecks the box.
(see below)
Not so when working with AutoCAD....why?
Why is it that every time a user checks a file into Vault from ACAD, they have to check that box?
There has got to be a seting somewhere that this check box stays selected. Why isn't this a default? How to "lock" that down?
The user is running Autocad 2010, and she was able to perform this function last week. Nothing has changed, and a system reboot did not correct the issue.
View 2 Replies View RelatedWhen i use AutoCad 2010, that is on a wind 7 OS, appear a message that indicate the next.
A software problem has caused autocad to close unexpectedly.
I have some custom buttons on toolbars and menus which I have created bitmaps for. Ever since I've upgraded to ACAD 2011, the image on the button will not save. I alter the .cui file and I can make the button find it. All looks great, I hit apply and I get no errors. When I close out I am back to the clouded question mark. The button works, but I can't get this to save the image. Also, any time I go into the cui editor, it moves all of my docked and locked toolbars. It gets difficult to have to keep dragging them back. It also keeps bringing up the steering wheel, even though I don't use that.
View 3 Replies View RelatedAn older gentleman at our company is very much used to having F12 as endpoint, F11 as intersection and F10 as dist. Now that I've upgraded him to 2011, his life is pretty much ruined.
No matter what I try, I can't get the temporary override buttons to work. F10 always does POLAR, F11 always does OTRACK and F12 always does DYN.
How can I kill AutoCAD's default behavior and implement what he wants done?
I am trying to write a macro for a button that when I press, it goes to a certain folder on a server. Normally when you click on the "open" button, it takes you to the last file location. I want that to be ignored an goes to a certain folder.
View 3 Replies View RelatedI just installed Autocad 2010 student, and now my microsoft wireless mouse 4000 will not pan when I press the scroll button. I have read a few older post that talk about Mbuttons but I can't find how to change my Mbutton from 0 to 1 or whatever it is supposed to be.
View 9 Replies View RelatedWhen I click right mouse button, it shows menu like below picture.
But i want to set menu like this.