AutoCAD 2010 :: Hatch Creation Ribbon - Will Not Close Or Stop Showing
Mar 1, 2012
I have Inventor Series 2011 and regarding my AutoCAD Mechanical 2011 have it updated to Version 3 (Product Version: E.208.0.0).
I am trying to work on some drawing in my AutoCAD and all the sudden the Hatch Creation Ribbon has decide it is going to rule the day. All day, and likely tomorrow too. I am not working on any hatches but why it has popped up. And it WILL NOT CLOSE! If I select the “Close Hatch Creation” panel button on the ribbon, it simply executes the last command that was ran. So, I figure I just close down the drawing and close then restart AutoCAD and I should be good to go. Nope. Reboot the computer. Nope. Soon as I fire AutoCAD back up and open any of my drawings.
View 8 Replies
ADVERTISEMENT
Dec 1, 2011
I was attempting to hatch a simple closed polyline when all of sudden AutoCad had to pull a stunt and give me the FATAL ERROR shut down. When I recovered my drawing, it automatically launched the hatch creation window..just as i left it. However, nothing works. I can't hatch anything, and I can't close the hatch editor ribbon. If i try to select an area to hatch, it lets me select it, but then glitches out and asks me for a base point to move something. I've tried everything, DPLGMODE set to 1, save as, close, shut down, etc..
View 8 Replies
View Related
Dec 16, 2012
When I try to access a hatch pattern from the Hatch Creation Ribbon Contextual Tab, C3D stops working and I have to force the program to quit. I've tried repairing the installation, which didn't work. I've also compeltely uninstalled and then reinstllaed the program, and have applied the Service Pack 1 update, but the problem persists.
However, accessing a hatch pattern after using the "Hatch" command from the command does seem to work.
View 4 Replies
View Related
Mar 11, 2012
acad 2012 is creating ghost files on my desktop. How do I stop the creation of them?The files are greyed out and are titled "Drawing2.dwl2".
I remember having this annoyance, for me at least, a year or so ago but don't remember how I made them disappear.
View 1 Replies
View Related
May 2, 2012
When I select a hatch in my dwg, the ribbon jumps to the hatch settings. Is there a way to make that just stay on the home tab?
View 2 Replies
View Related
Sep 5, 2012
I was working on a drawing file when my ribbon went haywire. My layer drop down seems frozen so it only shows the current layer and the hatch edit ribbon does not function properly.
The issue with the layer drop down is if I select a line, fill, etc. on any layer the layer drop down on the home ribbon does not change to show the layer that item is on and if I select multiple items on different layers which usually causes the drop down to go blank it still shows the current layer. The object color, line thickness and linetype all change on the properties tab to show the properties of the selected item so the entire home ribbon is not frozen. If I scroll through the layer drop down and select a layer to move the selected item to a new layer AutoCAD responds *Invalid selection* Expects a point or Window/Last/Crossing/BOX/All/Fence . . .
The hatch edit ribbon is completely useless. The angle and scale boxes are greyed out and if I select any of the buttons (Set Origin, change hatch pattern, etc.) AutoCAD again responds with *Invalid selection* . . .
The only CUI shown is the ACAD.CUIX and I have done a Reset and Restore, changed the workspace, restarted AutoCAD and restarted my computer. What am I missing?
AutoCAD 2011with current patches
Windows XP, SP3
View 2 Replies
View Related
Jan 26, 2012
He's got a series of roadway plans where the North arrow shows up fine on some sheets, but the fill (solid hatch) in the arrows doesn't display on others. The arrows are blocks, all the elements in the block are on layer "0" (zero).and the blocks reside in model space.
Just for grins. I had him expand a viewport (where the arrow looks fine) to capture a problematic arrow and... it looks fine. So, it's not an arrow/block/layer issue. It's a viewport issue.
View 9 Replies
View Related
Feb 1, 2013
I can't find the viewport panel that was in 2010 in 2013. I have a panel for model space viewports but not paperspace.
View 2 Replies
View Related
Oct 19, 2012
is there a way to stop ribbon from changing all those icons whenever you clicking on an object? because my computer at work is a bit slow and each click like that on a large civil 3d profile has a slight delay which that time adds up to reduced productivities. and i am clicking 500 times a day since there are 500 vertices to modifiy on say this alignment.
everytime you click on an object the ribbon changes which takes up cpu time due to running a bunch of codes to populate the icons on the ribbon. tried closing ribbon doesn't work still have the delay when mouse click on an object to show the grips. oh well maybe it's showing the grip that's using the cpu. but how can you say for sure without turning one feature off at a time to test?
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 5 Replies
View Related
Apr 17, 2010
It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies
View Related
Oct 11, 2013
I am using 2013 and my construction surfaces keep displaying in my drawing views. They are hidden at part and assembly level and include surfaces is greyed out but they show as visible in the feature tree in the idw, and in the views.
Is there a setting somewhere to stop this. This is from IDW. They should not be visible.
View 2 Replies
View Related
Mar 5, 2012
i have one of the drawing have hatch problem the problem is that my solid are not shown in print but other hatch are shown in printing only solid hatch are not showing i check fill command my fill is on and also check fill mode my fill mode is set to 1.
View 5 Replies
View Related
Jan 23, 2011
I have a viewport that is not showing the hatch pattern. In one layout tab, the hatch shows. In another tab, the hatch does not. The layer is not frozen or off, on the sheet or in the viewport.
Other items and hatch patterns on that same layer show up. The display is set to 2D wireframe. I even cut - paste a viewport from the working layout tab to the non-working layout tab and the pattern disappears.
View 4 Replies
View Related
Feb 22, 2012
Hatch is not showing up on my drawing anymore. I use hatch command, pick area, pattern, color, scale etc and then when I press enter or preview nothing happens. Hatch works on my layouts though but not in model view.
Before all that happened, AutoCAD crashed and stopped working so I had to force close it.
What do I do now? How can I make hatch work again?
I'm using AC 2010 mac version.
View 7 Replies
View Related
Mar 14, 2013
I'm not sure if there's a way to stop this, but whenever I add parts to an assembly and switch to the drawing of the assembly, the hidden lines for those parts show up in every view of the assembly. Right now I'm having to go to each view and select the hide hidden lines option for each part. Is it possible to stop the hidden lines from showing up everytime I add a part?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 7 Replies
View Related
Nov 28, 2012
I installed a brand new install of 2013 Product Design Suite Premium on a new machine. When I go to run Inventor everything seems to work fine. I make a drawing of a part and export to DWG. That's a requirement here. When I go to open the file in AutoCAD, the hatch pattern doesn't show and it looks like the boundaries for the hatch move to 0,0,0. Very stange and I haven't been able to figure this out. I installed Premium on another machine and performed the same export. Works fine on the other machine. The other machine however, has 2012 installed as well. Could this simply be a bad install?
View 9 Replies
View Related
Jun 11, 2011
I use the GIMP all the time and I love it! I'm not a realexpert, but can do mostly what I like.
I'm using Gimp 2.6 on Ubuntu. I open the GIMP, and I'm going along just fine, then all of a sudden I can't get the dialog box for a tool I'm using and I can't view the layers tool box. If I close everything and open GIMP again, it will work for a while.
View 3 Replies
View Related
Nov 13, 2013
We are currently using a networked Autocad 2012 Deployment. As each person opens the Autocad session, several "tmp" files are created in the "G:AutoCAD Support2012SupportToolPalette" directory. They remain when the session is closed and then several MORE are created. The directory itself is write protected for most users (engineers, etc) but open for the Drafstmen to be able to create new entries. I can see why they arent deleted becasue of this, but why are they thrown in there in the first place?
We had over 65,000 tmp listings this AM after examining all the directories associated with Autocad because ALL users were having problems opening and closing Autocad such as 3-4 minutes to open the app, and several minutes to close. Once they were deleted, Acad ran normally and no lags were detected.
View 6 Replies
View Related
Jul 10, 2009
I've been trying to calculate large areas using fills but I keep encountering a problem with some of the hatches not showing an area and thus ruining my calculation. I've found out that I can correct it by removing certain crossing point between lines as is shown below in my screenshots. Is there any reason this is causing a particular problem and can I avoid it to save me having to go back over my hatches checking for these malformed hatches?
area.jpg
altered.jpg
View 8 Replies
View Related
Mar 21, 2014
How to restore bar at top showing minimize maximize close options?
View 2 Replies
View Related
Oct 18, 2012
How do I stop the BOUNDRY BOX from showing and printing in the photo?
View 23 Replies
View Related
Nov 6, 2013
I am working at an engineering firm. I have had to basically redraw all the openings since our clients seem to be using wipe out blocks for their doors and windows. Well I want to make a beam lisp that will ask the user to click an insert point, width, and angle then draw an appropriate wipe out block with a dashed line down the center to represent our beam then rotate it into place.
View 3 Replies
View Related
Sep 5, 2013
how do I close an album and get back to the program showing name tags?
View 2 Replies
View Related
Feb 13, 2013
I must have clicked something or inadvertantly pressed a keyboard shortcut or something because a couple of weeks ago, the sub-tools on the tool palette started popping up without me having to hold down the mouse button for a second. Now when I click a tool (the rectangular marqee tool for example), the hidden tools (eliptical marqee, single row etc.).
I'm using PS CS5 on Windows 7.
View 5 Replies
View Related
Mar 1, 2012
If you have more then 1 dwg opened, and you close 1 dwg, wants to close the other dwgs as well?
View 7 Replies
View Related
Apr 11, 2012
Suddenly I got this issue when I draw an area boundary its not possible to close it with "enter" or "spacebar"..
View 9 Replies
View Related
Dec 17, 2013
AutoCAD 2010. I was editing a block in the block edit screen and it wouldnt save the block. My screen froze and I had to reboot the computer. Now when I open the drawing it is still in the block edit screen and I cant get out of it.
View 9 Replies
View Related
Aug 31, 2011
It has happened repeatedly, but on different occasions, that the close file X that should be in the top right position of the drawing has vanished. In other drawings that are open at the same time the X in present...Switching between drawings often brings the X back, but this is a weird bug that was not present before the 2012 release.
win 7 IV 2012 suite + Vault
View 7 Replies
View Related
Jun 15, 2012
How the actual file location of a drawing can be shown on the ribbon insert of just the file names. For example, file name BOM.dwg is located in C:custom---. Currently, the tool bar is showing AutoCAD BOM. dwg but I want it to show AutoCAD C:custom---.
View 2 Replies
View Related
Apr 11, 2012
I don't use MLINE much (and thought the command was DLINE) and wanted to draw 2 parallel lines. I found I could type MLINE and do what I want.
I'm trying to get used to the Ribbon and wanted to find it there, but after several minutes wasted looking all over the Ribbon, I never found it. The Help showed the ICON of 2 parallel diagonal lines but I can't find it anywhere.
View 3 Replies
View Related
Oct 12, 2012
Everytime I try to attach a Hyperlink to a dwg via the ribbon Hyperlink button I receive a FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at e1e7b028h.
View 1 Replies
View Related
