i have one of the drawing have hatch problem the problem is that my solid are not shown in print but other hatch are shown in printing only solid hatch are not showing i check fill command my fill is on and also check fill mode my fill mode is set to 1.
View 5 RepliesI have a viewport that is not showing the hatch pattern. In one layout tab, the hatch shows. In another tab, the hatch does not. The layer is not frozen or off, on the sheet or in the viewport.
Other items and hatch patterns on that same layer show up. The display is set to 2D wireframe. I even cut - paste a viewport from the working layout tab to the non-working layout tab and the pattern disappears.
He's got a series of roadway plans where the North arrow shows up fine on some sheets, but the fill (solid hatch) in the arrows doesn't display on others. The arrows are blocks, all the elements in the block are on layer "0" (zero).and the blocks reside in model space.
Just for grins. I had him expand a viewport (where the arrow looks fine) to capture a problematic arrow and... it looks fine. So, it's not an arrow/block/layer issue. It's a viewport issue.
Hatch is not showing up on my drawing anymore. I use hatch command, pick area, pattern, color, scale etc and then when I press enter or preview nothing happens. Hatch works on my layouts though but not in model view.
Before all that happened, AutoCAD crashed and stopped working so I had to force close it.
What do I do now? How can I make hatch work again?
I'm using AC 2010 mac version.
I installed a brand new install of 2013 Product Design Suite Premium on a new machine. When I go to run Inventor everything seems to work fine. I make a drawing of a part and export to DWG. That's a requirement here. When I go to open the file in AutoCAD, the hatch pattern doesn't show and it looks like the boundaries for the hatch move to 0,0,0. Very stange and I haven't been able to figure this out. I installed Premium on another machine and performed the same export. Works fine on the other machine. The other machine however, has 2012 installed as well. Could this simply be a bad install?
View 9 Replies View RelatedI have Inventor Series 2011 and regarding my AutoCAD Mechanical 2011 have it updated to Version 3 (Product Version: E.208.0.0).
I am trying to work on some drawing in my AutoCAD and all the sudden the Hatch Creation Ribbon has decide it is going to rule the day. All day, and likely tomorrow too. I am not working on any hatches but why it has popped up. And it WILL NOT CLOSE! If I select the “Close Hatch Creation” panel button on the ribbon, it simply executes the last command that was ran. So, I figure I just close down the drawing and close then restart AutoCAD and I should be good to go. Nope. Reboot the computer. Nope. Soon as I fire AutoCAD back up and open any of my drawings.
I've been trying to calculate large areas using fills but I keep encountering a problem with some of the hatches not showing an area and thus ruining my calculation. I've found out that I can correct it by removing certain crossing point between lines as is shown below in my screenshots. Is there any reason this is causing a particular problem and can I avoid it to save me having to go back over my hatches checking for these malformed hatches?
area.jpg
altered.jpg
I am trying to entmake a hatch entity from a hatch template.
After entget the template hatch entity, i get the followings
Select object: ((-1 . <Entity name: 7ed11b78>) (0 . "HATCH") (330 . <Entity
name: 7efc7c10>) (5 . "737") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 .
"SECTION-LABEL") (62 . 255) (100 . "AcDbHatch") (10 0.0 0.0 0.0) (210 0.0 0.0
1.0) (2 . "SOLID") (70 . 1) (71 . 0) (91 . 1) (92 . 1) (93 . 8) (72 . 1) (10
633596.0 5.79713e+006 0.0) (11 633519.0 5.79713e+006 0.0) (72 . 1) (10 633519.0
5.79713e+006 0.0) (11 633519.0 5.79708e+006 0.0) (72 . 1) (10 633519.0
5.79708e+006 0.0) (11 633500.0 5.79708e+006 0.0) (72 . 1) (10 633500.0
[code]....
Now I wrote the following code using the above data as follows
(entmake (list (cons 0 "HATCH") (cons 67 0) (cons 410 "Model") (cons 8 "SECTION-LABEL") (cons 62 255) (cons 10 (list 0.0 0.0 0.0)) (cons 210 (list 0.0 0.0 1.0)) (cons 2 "SOLID") (cons 70 1) (cons 71 0) (cons 91 1) (cons 92 1) (cons 93 8) (cons 72 1) (cons 10 pt1) (cons 11 pt2) (cons 72 1) (cons 10 pt2) (cons 11 pt3) (cons 72 1) (cons 10 pt3) (cons 11 pt4) (cons 72 1) (cons 10 pt4) (cons 11 pt5) (cons 72 1) (cons 10 pt5) (cons 11 pt6) (cons 72 1) (cons 10 pt6) (cons 11 pt7) (cons 72 1) (cons 10 pt7) (cons 11 pt8) (cons 72 1) (cons 10 pt8) (cons 11 pt1) (cons 97 0) (cons 75 0) (cons 76 1) (cons 98 1) (cons 10 (list 0.0 0.0 0.0)) (cons 450 0) (cons 451 0) (cons 460 0.0) (cons 461 0.0) (cons 452 1) (cons 462 1.0) (cons 453 2) (cons 463 0.0) (cons 63 5) (cons 421 255) (cons 463 1.0) (cons 63 7) (cons 470 "LINEAR")))
The point variables pt1, pt2....pt8 are all defined. But when I run the code the hatch is not being created? Why?
I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
View 9 Replies View RelatedIt is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies View RelatedJust downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies View RelatedI want to be able to add a Block Reference to a hatch. I'm adding the block reference to an ObjectIdCollection and the hatch is not taking it when using AddLoop().
So I thought maybe I needed to add the location of the polyline (curve-like) object that is member of the blockreference to the hatch, but I don't know how to get its ObjectId.
Hatch thisHatch = new Hatch();thisHatch.Layer = layerName;thisHatch.SetDatabaseDefaults();thisHatch.SetHatchPattern(patternType, patterName);thisHatch.Color = Color.FromColorIndex(ColorMethod.ByColor, colorIndex);thisHatch.Transparency = new Transparency((Byte)(255 * (100 - 60) / 100));tSpace.AppendEntity(thisHatch);transaction.AddNewlyCreatedDBObject(thisHatch, [code]........
Also, I'm trying to delete certain HatchLoop that is associated to a polyline but I don't know how to do it. I'm going through the loops in the hatch but I don't know what to do there. I wanna do this so I create a new and different hatch on top.
I think one could also copy all the loops except the one one wants to delete, but I'm not sure how to tell which one is the one I want to delete that is the one associated to a polyline or that is in certain region.
I have AUTOCAD LT 2012 - windows 7 - SP1
Neither the button for Hatching or the Draw Hatch menu do not activate the HATCH DIALOG BOX?
This means I cannot Hatch?
I have also added the Hotfix for the Ribbon and it made no difference.
I've migrated from 2005 to 2014 LT and wondered if they have added to the hatch commands. I've looked and haven't found anything. Is there a command that you can pick a hatch pattern already shown on the drawing and make that pattern the existing one to use? I sometimes have multiple hatch patterns and scales, and wanted a quick way to go from one to another without lisp help.
View 3 Replies View RelatedWhy is my hatch off set from what I want to hatch? I pic the points of the area in 3d i want to hatch but it ends up hatching out of the points i select?
View 5 Replies View RelatedI recently downloaded new hatch pattern that were not in the AtoCAD hatch list and I really need..step to install them to the hatch list so AutoCAD can recognize them?
View 5 Replies View RelatedMy boss recently gave me a USB with a huge amount of hatches on it. The hatches are in .pat format. When I opened up AutoCAD (the version I have is AutoCAD Civil 3D 2011), and typed in "hatch" to have a look at the hatch creation properties box, I can't find where to load a hatch. I am also a bit confused as to where I should save all these new hatches so I can access them easily in the future.
View 9 Replies View RelatedHow do you set the gap tolerance in Hatch command?
View 1 Replies View RelatedWhen i hatch an area, i's fine, but when i match prop to another (witch is out of bounds) it goes out of bounds.
All of my hatches went out of bounds at some point.
I'm having a trouble with my hatches, every time I move an object contains a hatch, and some times when I re-open my DWG file, the hatch comes in front of the objects, is very annoying sending those hatches behind the objects all the time.
View 4 Replies View Relatedwhen I create a pdf from my drawing some of the hatches change (simple line hatches will have a heavier line). it is fine in the dwg.
View 1 Replies View RelatedI have many Hatch pattern in my dwg. is there any LISP if i slect any Hatch then it will give me area in table
View 5 Replies View RelatedI need to cut a hole in the hatch pattern. A hole is a area which is not hatched. I have two closed polylines. I need to hatch the poly1 - poly2 area.
I tried adding both to the ObjectIdCollection, but that throws up an error. I tried creating Regions and subtracting it. However, we can create Region for the closed polylines, but not the hatch.
Here is the code to create the hatch
[CommandMethod("TestHatchHole", CommandFlags.UsePickSet)] public static void CreateHatch() { Document doc = Application.DocumentManager.MdiActiveDocument; Database db = doc.Database; Editor ed = doc.Editor; try { using (Transaction Tx [code].....
I am working on a drawing (not originally created by me) and cannot create any hatches at all. If I make a closed shape, select Hatch, and select an interior point, nothing at all happens. No hatch is created, no error messages are generated. The command simply appears to finish as normal but doesn't actually create anything.
View 9 Replies View RelatedHow can it be that a hatch object has no area property? Using the AREA command, it says the object has no area.
None shown in properties.
None listed using vlisp (vla-get-Area Obj).
I have seen this before, but why or how it happens.
Looking how the best way to hatch out lines, equipment being removed on drawings. is it possible to create a linetype so it would be easy to just follow a line that needs hatching, or create a multiline?
View 2 Replies View RelatedI use "Add: Pick Points" to hatch my elevations. The hatch does not seem to stretch when I need to stretch the elevations. Is there a way to make it stretch?
View 4 Replies View RelatedWhere the aclt.pat is stored? I could not find it in my cad file.
Are there anyother easier way to add a hatch pattern? In-addition, How do I use the command HPNAME (initial vale = ANSI31) what values can i set?
How to properly select a hatch? i find i'm constantly skimming my mouse all over the hatch trying to find a spot where i can actually select it... sometimes it's super super precise, and if i move my mouse even a tiny bit off it'll disappear.
View 9 Replies View RelatedThe AR-Sand hatch is visible in a published pdf file, but does not plot.
View 1 Replies View Related