I've migrated from 2005 to 2014 LT and wondered if they have added to the hatch commands. I've looked and haven't found anything. Is there a command that you can pick a hatch pattern already shown on the drawing and make that pattern the existing one to use? I sometimes have multiple hatch patterns and scales, and wanted a quick way to go from one to another without lisp help.
View 3 RepliesIt is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies View RelatedWhen doing a match properties from one hatch to another, I end up with two hatches having identical properties (pattern, scale, etc) but that look completely different. See the attached image.
I tried the old snapbase trick and also tried various hatch origin settings, but without success.
Why is it that whenever i use a command for pan and match properties, the hatch from the other areas do not display but when i exit the command the hatch is there. the problem is you cannot match the properties of from one hatch to another.
This happens in all drawings!
why is it that whenever i use a command for pan and match properties, the hatch from the other areas do not display or miss its visibility but when i exit the command the hatch is there. the problem is you cannot match the properties of from one point to another.
View 1 Replies View RelatedI am trying to entmake a hatch entity from a hatch template.
After entget the template hatch entity, i get the followings
Select object: ((-1 . <Entity name: 7ed11b78>) (0 . "HATCH") (330 . <Entity
name: 7efc7c10>) (5 . "737") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 .
"SECTION-LABEL") (62 . 255) (100 . "AcDbHatch") (10 0.0 0.0 0.0) (210 0.0 0.0
1.0) (2 . "SOLID") (70 . 1) (71 . 0) (91 . 1) (92 . 1) (93 . 8) (72 . 1) (10
633596.0 5.79713e+006 0.0) (11 633519.0 5.79713e+006 0.0) (72 . 1) (10 633519.0
5.79713e+006 0.0) (11 633519.0 5.79708e+006 0.0) (72 . 1) (10 633519.0
5.79708e+006 0.0) (11 633500.0 5.79708e+006 0.0) (72 . 1) (10 633500.0
[code]....
Now I wrote the following code using the above data as follows
(entmake (list (cons 0 "HATCH") (cons 67 0) (cons 410 "Model") (cons 8 "SECTION-LABEL") (cons 62 255) (cons 10 (list 0.0 0.0 0.0)) (cons 210 (list 0.0 0.0 1.0)) (cons 2 "SOLID") (cons 70 1) (cons 71 0) (cons 91 1) (cons 92 1) (cons 93 8) (cons 72 1) (cons 10 pt1) (cons 11 pt2) (cons 72 1) (cons 10 pt2) (cons 11 pt3) (cons 72 1) (cons 10 pt3) (cons 11 pt4) (cons 72 1) (cons 10 pt4) (cons 11 pt5) (cons 72 1) (cons 10 pt5) (cons 11 pt6) (cons 72 1) (cons 10 pt6) (cons 11 pt7) (cons 72 1) (cons 10 pt7) (cons 11 pt8) (cons 72 1) (cons 10 pt8) (cons 11 pt1) (cons 97 0) (cons 75 0) (cons 76 1) (cons 98 1) (cons 10 (list 0.0 0.0 0.0)) (cons 450 0) (cons 451 0) (cons 460 0.0) (cons 461 0.0) (cons 452 1) (cons 462 1.0) (cons 453 2) (cons 463 0.0) (cons 63 5) (cons 421 255) (cons 463 1.0) (cons 63 7) (cons 470 "LINEAR")))
The point variables pt1, pt2....pt8 are all defined. But when I run the code the hatch is not being created? Why?
I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
View 9 Replies View RelatedJust downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies View RelatedI want to be able to add a Block Reference to a hatch. I'm adding the block reference to an ObjectIdCollection and the hatch is not taking it when using AddLoop().
So I thought maybe I needed to add the location of the polyline (curve-like) object that is member of the blockreference to the hatch, but I don't know how to get its ObjectId.
Hatch thisHatch = new Hatch();thisHatch.Layer = layerName;thisHatch.SetDatabaseDefaults();thisHatch.SetHatchPattern(patternType, patterName);thisHatch.Color = Color.FromColorIndex(ColorMethod.ByColor, colorIndex);thisHatch.Transparency = new Transparency((Byte)(255 * (100 - 60) / 100));tSpace.AppendEntity(thisHatch);transaction.AddNewlyCreatedDBObject(thisHatch, [code]........
Also, I'm trying to delete certain HatchLoop that is associated to a polyline but I don't know how to do it. I'm going through the loops in the hatch but I don't know what to do there. I wanna do this so I create a new and different hatch on top.
I think one could also copy all the loops except the one one wants to delete, but I'm not sure how to tell which one is the one I want to delete that is the one associated to a polyline or that is in certain region.
I have AUTOCAD LT 2012 - windows 7 - SP1
Neither the button for Hatching or the Draw Hatch menu do not activate the HATCH DIALOG BOX?
This means I cannot Hatch?
I have also added the Hotfix for the Ribbon and it made no difference.
How to convert the “existing” hatch from one measurement to another?
In the screenshot below, the first hatch is drawn with “measurement” = 1 (metric), while the second is drawn when the measurement = 0 (imperial). The “measurement” value is not a property for the hatch!
Then how to convert the hatch that already exist and drawn with the “measurement” = 0 to the “measurement” = 1.
In other words, how to switch all the hatches in a particular plan from being “imperial” based (measurement = 0) to “metric” (measurement = 1)?
Is there a way to do that? Or should we delete the existing hatches and re-draw them with the required setting (metric/imperial)?
I'm trying to use the hatch command on a drawing. Everything seems to work fine, but when I hit enter after having used the hatch command, selected pick points etc. nothing happens on the drawing. There are no error messages.
I can use hatch without problems on other drawings so I suspect it has something to do with the drawing or I've overlooked a setting or two.
Isn't there a way of taking an existing hatch patter off a drawing file and load it into your hatch library?
View 2 Replies View RelatedI would like to know if there is a lisp that would run every time I run the hatch command? I have autosave on, but I never remember to do a good clean save before I run hatch. I remember as autocad locks up and crashes! I would like a list that would prompt me to save when I hit hatch with option of yes, save or cancel. is this a tall order?
View 9 Replies View RelatedI face new problem in using solid hatch command ,when I choose poly lines and use hatch some unwanted lines appears inside hatch area which make my shape separate from others part be meant be unify. I am amateur in using auto cad .BTW , my scale is about 5 micron meter and when I export the drawing int pdf all straight lines become curvy .I upload the image which describe itself my problem. URLs...
View 1 Replies View RelatedInstead of a window popping up with the hatch settings, I just get the following in the command prompt:
Pick internal point or [Select objects/settings}:
what might be causing this?
When in the hatch command in 2012 I go to select the layer I want to use, but only some of them appear in alphabetical order, and the rest seem to be all over the place making it quite difficult to find the layer I want. I've tried increasing the maxsort figure, but it makes no difference. How to make them appear in the correct order?
View 7 Replies View RelatedSomehow, in sketch mode, under the draw panel, I have lost the Hatch/Fill command. I've spent several hours searching, and cannot find a way to get it back.
View 4 Replies View RelatedWhy is my hatch off set from what I want to hatch? I pic the points of the area in 3d i want to hatch but it ends up hatching out of the points i select?
View 5 Replies View RelatedWe are facing the problem of FATAL error while giving the HATCH command while using AutoCAD 2014 LT
We have successfully installed it on system and reinstalled it many times still the same problem , have attached the file for refrence.
Operating system is Windows 7 Professional 64 Bit
whenever you use the hatch command sends the message fatal mistake and closes the program.
already have the service pack 1 installed.
I'm trying to hatch floor patterns in suits. I draw a pline aroudn perimeter. There are a couple of problems.
First, when I do a hatch by selecting the pline ("object"), it doesn't detect islands, such as our room tag. This is likely because the hatch is over an xref (the suite is an xref, room tag and pline are not), and hatches don't seem to like xrefs.
Next option is to hatch by "pick points". When I do that, and select a point on the floor of the suite, all of a sudden an old xref or xclip appears in 2 locations, and the hatch boundary takes the lines from that new xref into consideration. The crazy thing is that this xref does not exist in any form in the drawing. I have purged/audited the drawing, and the drawing no longer even exists in our computer.
I distinctly remember back in the day, (~2006), that you would be able to to choose the items you wanted to hatch first, then enter the Hatch command, hit OK, and your objects would be hatched. Simple! Since 2010, you have to enter the Hatch command, then hit Select Objects, then select your objects, then hit Enter, then hit OK, which I find it is less efficient.
View 6 Replies View RelatedIn the hatch dialogue there is a setting to target the hatch to a specific layer. How does one set the default to ALWAYS be "Use Current"?
Attached jpg shows the target layer as ffbrg, but I want that to ALWAYS read "Use Current" when creating a NEW hartch. In other words, I am happily working in a specific layer creating all these hatches and then realize LATER that all the hatches were in different layers causing great confusiion and havoc.
I find conflict area between list command for hatch and calculation.
when do you make calculation list of plines 2381.399
when do you make calculation list of hatch 2545.948
If I try to hatch, it takes minutes for the command to process. Any settings I need to check?
View 6 Replies View RelatedI've got a drawing in Acad 2010 which consist of about 6000 lines. The image is a ship, and I need the drawing to insert in a HMI screen.
Now my problem: The accomedation of the ship is white, as is the background of the sheet. I need the drawing with a black background, but want to keep the white color of the accomedation of the ship. When I change the backgroundcolor of the sheet to black, the white areas inside the drawing will also change into black. If I trie to hatch the white areas inside the drawing the program gives a messages that there are to many open bounderies.
I tried to make a blok of the drawing and move it on a black square, but then again the white areas will turn black.
So for short: How can I make the white areas non-transparent without using the hatch-command?????
Civil 3d 2014.... I have existing surface and a profile with 5 sample lines. All of them are good except 1 sample offset. I can do I quick profile and the profile looks like it should but if I generate an actual profile 90% of the profile is off. I have already tried reoding the alignment but it looks same on either one.
View 2 Replies View RelatedI recently downloaded new hatch pattern that were not in the AtoCAD hatch list and I really need..step to install them to the hatch list so AutoCAD can recognize them?
View 5 Replies View Relatedi have one of the drawing have hatch problem the problem is that my solid are not shown in print but other hatch are shown in printing only solid hatch are not showing i check fill command my fill is on and also check fill mode my fill mode is set to 1.
View 5 Replies View Related