why is it that whenever i use a command for pan and match properties, the hatch from the other areas do not display or miss its visibility but when i exit the command the hatch is there. the problem is you cannot match the properties of from one point to another.
View 1 RepliesWhy is it that whenever i use a command for pan and match properties, the hatch from the other areas do not display but when i exit the command the hatch is there. the problem is you cannot match the properties of from one hatch to another.
This happens in all drawings!
When doing a match properties from one hatch to another, I end up with two hatches having identical properties (pattern, scale, etc) but that look completely different. See the attached image.
I tried the old snapbase trick and also tried various hatch origin settings, but without success.
MA.JPG
why i can't not match properties (MP) multileader texts, as you can see on the pic, i want the Mleader text on the right to be the same size as on the left, they are in the same layer, same mleader style but when click MP to match with the one on the left, nothing happen?
I'd like to create a routine that will automatically change an object to a pre-defined layer.
Command "1" would "MATCHPROP" and change a selected object to layer "1empty", command "2" would "MATCHPROP" to layer "0"
So, type 1, select an object, that object would be changed to layer "1empty"
In 2011 AutoCAD Mechanical, I used to be able to match dimension override properties including the entered text. Not sure how it worked, but the manual entered text would be matched/transferred to the new default dimension. Now using 2012 and this function is not working. This feature is quite handy for the type of work we do. All match property settings are enabled.
View 2 Replies View RelatedI have a drawing with exsisting multileaders in it.
I am trying to apply the match properties to a newly created multileader but it isn't working.
Same hatch properties but different result! How come?
In the screenshots below, I got a hatch of the same properties, but the output in the screen is different!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have a solid hatch pattern I want to use on a sheet that would display under a Model Space View (MSV).
(Ideally, I would like the hatch to come from an xref set up in the .dwt for the sheet, but I won't push my luck.)
Unfortunately the solid hatch always remains above the MSV. Refer to image attached. I have tried the following :
- 'Draw Order' - 'Send to Back' of the hatch (including it's bounding box)
- "hatchtoback"
- "hpdraworder" = 1
- "sortents" = 0
I'm trying to figure out two things that have changed:
1) Lets say i create a polyline, lets say its 15 inches long. I used to be able to click on it and have the length show up in my properties. it no longer does that.
2) Lets say i create a polyline, it's green and has a dot pattern. I decided i wanted to change it to yellow and hidden pattern. I can no longer select the line and change it under the properties, it will change it in properties, but not on my screen. then when i draw a new line it will be yellow and hidden. I end up having to matchprop to make it work.
I've migrated from 2005 to 2014 LT and wondered if they have added to the hatch commands. I've looked and haven't found anything. Is there a command that you can pick a hatch pattern already shown on the drawing and make that pattern the existing one to use? I sometimes have multiple hatch patterns and scales, and wanted a quick way to go from one to another without lisp help.
View 3 Replies View RelatedMy properties palette doesn't have a field for linetype? I swear there was one there previously (under the general section)?
View 4 Replies View RelatedI recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
For the last couple weeks I've been unable to view object properties or quick properties. If I right click on an object and select quick properties, a blank window comes up:
Similarly, if I bring up a properties window and select an object, the selection field remains blank and the object property fields are not populated with information relating to the selected object:
My colleague is using AutoCAD 2012 LT. He was wondering is it possible to hatch an un-hatched object by matching it with the properties of a hatched source object?
View 1 Replies View RelatedIts it possible to match properties in inventor like AutoCad
View 2 Replies View RelatedI was working on one of the existing cad drawing, i came across this problem. I tried to match my Mtext with the existing text style, after M.P (match prop) everything look the same except the fonts style would not match, why is that? Does it have to be on the same layer?
View 9 Replies View RelatedI'm adding some rectangles to a drawing and want the hatching to match what it aready there. I thought the simplest way would be to match the properties, which works 99% of the time, but for some reason when I do that on the drawing I'm currently working on the scale is different.
View 8 Replies View RelatedIt is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies View RelatedI am using LT 2013. I cannot figure out how to match properties for text. I click on the 2 options and the box witdth, orientation, layer will match but not the style or font. I have tried using Quick Properties to select but have not had any success with this tool. Here is what I did:
Created a style and named it Arial.
Open the Quickselect box.
Apply to : click the box and select the various mtext objects.
Object Type: mText
Properties: Style
Operator: Select All
Include in New Selection Set is checked.
I click Ok and the objects are selected.
Next I go to the Properties Manager and change the style to the one I want to use, bu the text does not change. If Idoubleclick a text object it shows the correct style, but not the correct font. What have I missed doing?
i want to match properties from one multi text to many others , but i dont want to change the rotation to suite the source ...
View 9 Replies View RelatedWe've just upgraded to AutoCAD Architecture 2012 and I discovered that my match properties command (MA) is now on steroids. In the process of making an existing plan into a demo plan, I put a toilet on a demo layer. I intended to use match properties to put other select items on the same demo layer, but when I touched the lavatory, it turned into a toilet. I've never had this happen before. In trying to solve the issue, I've discovered the same thing happens with other AEC objects (couches, urnials, chairs -- all became toilets) and it happens in multiple files. Only walls and doors remain intact with only the layer, color and linetype changing (which is what I was expecting).
I looked at the settings inside the match properties command and none of them seemed to apply. I deselected the special properties options anyway, but the problem remains.
I'm doing dimensions on Layout and I'm facing a problem: Using the same configurations of dimensions, sometimes I get the right dimension, but sometimes, without changing any configurations, I get wrong dimensions.
At the same drawing, with the same configurations, I get different dimensions to the same line. The only way that I'm being able to correct it is by using Match Properties (from a correct dimension to the one that went wrong).
my match properties command no longer works and i dont know why. No error msgs come up either
View 3 Replies View RelatedWhen I'm into reference edit mode (REFEDIT) I can make match properties command also on objects which are not in working set - this was not possible to do before and it is pretty annoying. Is this a bug or some new function, hopefully turnable on/off?
Also I never understood, why is not possible to copy anything from reference edit mode, but it is possible to paste into, also there are no problems in Block editor mode? It seems to me like artificial set limit with no obvius explanation why would that be good especially when I see that it is possible to match properties on outside objects.
When I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
I've been looking for commant that will allow me to copy a selection of entities to another layer for details. I'll need to be able to select several objets all at once and have each of them maintain the correct colors, linetypes, lineweights. Most everything is set as bylayer but that makes everything change once the objects are moved to a new layer.
How can I keep the everything looking like it never changed except for the fact that it will be moved to a new layer - layer 0 in this situation?
I am having two problems with hatching.
1) I do not have as many hatch patterns available to me in the "Other Predefined" tab as my colleagues do on their computers. I also do not have custom hatch patterns listed.
2) The "Inherit Properties" button doesn't work on my computer so I cannot even match the hatch pattern if I copy a drawing in from another file.
This problem is making it difficult for me to finish my work in a timely manner as I have to run to someone else's computer when I need to hatch something.
Currently when I HATCH it is all 'Angle', with SCALE set to 1.0.
I have to do alot of hatching with 'Honey' SCALE of 0.5.
Can I preset this function or do I have to alter tis properties after it is drawn, every time?
Normally when applying the matchprop command in CAD, one has to first pick the template element, and then select the elements which should have this template element's properties copied to/matched.
is it possible (via lisp perhaps?) to reverse this order, so that i can select a bunch of elements (e.g. through the quickselect icon) and THEN apply a matchpropertieslisp command, then select a single template element which the initially selected elements should mimic?
Background Hatch Color Properties? When using a background color in a hatch pattern... is it possible to set transparancy and/or screening options when using an *.stb file?
If I were using a *.ctb file it would be obvious, but I'm doing contract work for a client and am using their *.stb file, and I don't have the option of adding another option to their *.stb file.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013