AutoCAD 2010 :: Display Order Of Hatch On Sheet
Sep 9, 2012
I have a solid hatch pattern I want to use on a sheet that would display under a Model Space View (MSV).
(Ideally, I would like the hatch to come from an xref set up in the .dwt for the sheet, but I won't push my luck.)
Unfortunately the solid hatch always remains above the MSV. Refer to image attached. I have tried the following :
- 'Draw Order' - 'Send to Back' of the hatch (including it's bounding box)
- "hatchtoback"
- "hpdraworder" = 1
- "sortents" = 0
View 2 Replies
ADVERTISEMENT
Aug 14, 2013
In profile I would like to show the 'Inside Pipe Walls' line on top of the 'Pipe Hatch' is this possible, search some threads haven't found a solution.
View 5 Replies
View Related
Oct 25, 2012
I have 2 images that I need to see on 2 diferent views. On one view I need to see image A over image B. On the other view I need to see image B over image A. When I do the display order, it reflects on both views, so I have the same order on both views.
How can I avoid this, so that I can see different display orders depending on the view?
I am usinf AutoCAD 2010.
View 3 Replies
View Related
Feb 9, 2011
Is there a way to set the sort order in Sheet Set Manager for the Model Views tab? Seems like a few releases ago it was alphabetical - now its random and almost impossible to locate a specific drawing in a large project.
Tried changing MAXSORT and it did not have an effect.
View 4 Replies
View Related
Mar 30, 2012
The files in my sheet set manager model view is not in alphabetical order? Any way to get it in aphabetical order?
View 2 Replies
View Related
Mar 11, 2012
why is it that whenever i use a command for pan and match properties, the hatch from the other areas do not display or miss its visibility but when i exit the command the hatch is there. the problem is you cannot match the properties of from one point to another.
View 1 Replies
View Related
Nov 15, 2012
Working in AutoCAD LT 2010.
Drawing format 2007 or 2010
bedit, OK if you regenall after
refedit, Ok if you regenall ofter
design Center - display order goes out the window. The inserted block is redefined but the rest of the drawing loses all its display order. sortents (127, 33, 51, etc) and displayorderctl does nothing, either before or after the block is redefined. hatches and blocks just jump to the front (display order shows as order of drawn not order as moved to) Regenall does nothing.
absolute nightmare with display order managed elevations (solid hatch, baconies, windows, multple buildings, all overlaying!!)
View 4 Replies
View Related
Jul 20, 2012
Is there a way to change the order of the Profile Hatch after it's been done as later solid hatches are displaying over the earlier ones?
The only way I've been able to do this is to delete all and then create in the correct order which is a bit of a PITA.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 4 Replies
View Related
Apr 17, 2010
It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies
View Related
Oct 6, 2008
I use image insert to attach aerial photographs. I would like to use the FDO raster connection, but I keep having a problem with the raster image losing it's display order. I use "display order" in the display manager and move the raster to the bottom, but for some reason it keeps popping above the line work and I have to keep sending it to the back.
I put images in drawings quite frequently as they change from year to year and we monitor a large number of projects yearly. Is image insert still the quickest solution or is there a way to ensure the image will retain it's display order when I do a data connect?
View 2 Replies
View Related
Nov 27, 2012
I have several shp files ordered in the display manager. Three Polygons, one line and one point shp. the problem is that the bottom polygon that is supposed to draw order last continues to show up above all other files during plotting to PDF or other digital file. I have tried to disconnect and reconnect the problem shp, reorder several times but nothing changes. This is making it impossible for me to plot a file in the way is it being displayed.
View 7 Replies
View Related
Aug 19, 2013
I can't find where to set the display order of layers. I have lines that display under a PDF underlay but I can't drag the layer above the others. They appear to be in alphabetical order, which, while frustrating, I can live with if AC will allow me to easily move layers around some other way.
View 7 Replies
View Related
Nov 13, 2013
I am programmatically creating several property defintions inside of a property set definition. I would like to be able to set the display order of the property definitions but the property is read only. How to be able to accomplish this using the API?
View 1 Replies
View Related
Apr 19, 2013
In the "MEP 2014 Whats new .." Presentation is available as a new feature: "Display order by layer," What command (s) is meant here?
View 1 Replies
View Related
Sep 11, 2013
We have a project where we have a combination of CAD data and shape files (connected) with various labels in both formats.
They are in the proper order for both 'Groups' and 'Draw Order' in the 'Display Manager'.
We have two separate viewports, created and named using 'Display Maps' with the applicable layers turned to visible as each viewport requires (some common shapefiles need to be display, some different, some different CAD data also). When we do a regen within one viewport the other non-active viewport immediately loses its draw order (CAD objects appear above the shapefile data). If we switch viewports and Regen then the first viewport will lose its draworder.
Could this be a case for Autodesk Subscription and the developer's to resolve?
View 1 Replies
View Related
Aug 14, 2013
Is there an easy way to put drawings in alphabetical order with sheet set manager?
View 4 Replies
View Related
May 1, 2013
I have a surface and a pipe network. I am trying to print out a picture of these two objects rendered for the engineer to see. I have the surface as a rendered surface, but the pipe network is displaying under the surface (so it is invisible) and I was wondering if there was a way to have the pipe network display "thru" the surface so the engineer can see the pipe network with all the pipes drawn underneath the surface. Is this possible?
View 1 Replies
View Related
Aug 22, 2012
Having trouble with the display order command? It does not work when you right click or when you type in the command. It says command unkown.
View 1 Replies
View Related
Feb 22, 2012
I am having some issues with sheetset. The pdf name is name of the drawing + name of layout.
1. The sheet sets do not follow the order of the drawings layouts
2. The list is not according to the drawings order in the directory
3. The sheets are automatically combined when I want them to be separate
4. There are numbers 1,2,3... automatically prefixed to the sheet causing additional trouble.
View 3 Replies
View Related
Feb 1, 2012
We are in the process of updating our pipe network structure label styles. The styles are displaying the inverts in a random order (Please see caption) & we'd like to show the inverts in descending order from highest pipe as first text string & lowest pipe as bottom text string. Is there a way to globally tell civil 3d to always use a descending invert order? Only fix we've found is to disconnect & reconnect the parts in order to adjust invert order.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 6 Replies
View Related
Jun 20, 2012
I recently started working on Inventor 2013 and I'm trying to copy a drawing view in order to place it on another sheet. Unfortunatly I see no copy option. Am I doing sth wrong or it's due to the changes in the version?
View 7 Replies
View Related
Dec 12, 2013
Using Autocad2013. Roughly two weeks ago we updated our company server. Since then, in the Sheet Set Manager, the 'Model View' tab is no longer in alphabetical order. The drawings are just randomly listed now, no order whatsoever.
View 2 Replies
View Related
Feb 4, 2013
often the hatches in the drawing is so dense i cant navigate. is there a way the disable hatches display?
View 5 Replies
View Related
Dec 29, 2011
A way to change the display order of pipes connected to the structure in a structure label? (plan and profile) Say you have a 10", 6" and 12" pipe connected to a structure, modeled in that order, so label would place them 10, 6, 12. we would like the label to display the order as 6,10, then 12 without having to drag the pipes off and then having to re-input inverts.
View 6 Replies
View Related
Jan 3, 2013
Is there a way to include custom sheet properties in the sheet list table?
AutoCAD Civil 3D 2012 (Primary),
Dell Percision T3500: MS Windows 7 64-bit SP1;
Intel Xeon CPU W3505 @ 2.53GHz, 12.00 GB RAM, NVIDIA Quadro 600
View 4 Replies
View Related
Sep 6, 2012
I am not able to open Sheet list in Sheet Set Manager.......
View 3 Replies
View Related
Jan 23, 2013
After closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies
View Related
Apr 2, 2013
I have over a 100pg plan set and have changed page numbers and added more drawings and deleted a few. so now we have to go through the entire Table of Contents and drawings and renumber everything. Is there a way to link the fields in the Table of Contents with the page numbers on the drawings?
View 2 Replies
View Related
May 3, 2012
Why is it that whenever i use a command for pan and match properties, the hatch from the other areas do not display but when i exit the command the hatch is there. the problem is you cannot match the properties of from one hatch to another.
This happens in all drawings!
View 3 Replies
View Related
Nov 13, 2013
Using ISO.idw template I created into a sheet a Sketch which contains a hatch. Now I want to delete that hatch and I don't find anywhere how to delete it.
The second problem is this: I want to create in multiple sheets the same drawing but with small differences. How to copy a drawing from a sheet to another sheet. I press right click on the first sheet and i press Copy but there's no Paste button.
View 1 Replies
View Related
Sep 25, 2012
I am using a symbol that includes a several text boxes. Each text box includes "prompted text" and "drawing properties". When I insert the symbol onto a drawing, the "Edit Property Fields" menu appears. In this menu, I can input my prompted field text or see the various "drawing properties".
My question is, how do I change the order that these property fields are displayed? It seems as if it depends on the order that the text boxes were created while defining the symbol definition. Is there any other way to change the display order?
View 3 Replies
View Related
