I have 2 images that I need to see on 2 diferent views. On one view I need to see image A over image B. On the other view I need to see image B over image A. When I do the display order, it reflects on both views, so I have the same order on both views.
How can I avoid this, so that I can see different display orders depending on the view?
I am usinf AutoCAD 2010.
Is there a way to set the sort order in Sheet Set Manager for the Model Views tab? Seems like a few releases ago it was alphabetical - now its random and almost impossible to locate a specific drawing in a large project.
Tried changing MAXSORT and it did not have an effect.
I have a solid hatch pattern I want to use on a sheet that would display under a Model Space View (MSV).
(Ideally, I would like the hatch to come from an xref set up in the .dwt for the sheet, but I won't push my luck.)
Unfortunately the solid hatch always remains above the MSV. Refer to image attached. I have tried the following :
- 'Draw Order' - 'Send to Back' of the hatch (including it's bounding box)
- "hatchtoback"
- "hpdraworder" = 1
- "sortents" = 0
Working in AutoCAD LT 2010.
Drawing format 2007 or 2010
bedit, OK if you regenall after
refedit, Ok if you regenall ofter
design Center - display order goes out the window. The inserted block is redefined but the rest of the drawing loses all its display order. sortents (127, 33, 51, etc) and displayorderctl does nothing, either before or after the block is redefined. hatches and blocks just jump to the front (display order shows as order of drawn not order as moved to) Regenall does nothing.
absolute nightmare with display order managed elevations (solid hatch, baconies, windows, multple buildings, all overlaying!!)
Within the drawing title block we have a 'Text' of type 'Custom Properties - Model' which pulls in a custom iprop from a model which is the models finished weight. This is a common way of auto populating title box entries.
The problem is that the sheet populates the text with the info related to the first viewport placed upon the drawing.
Whilst fine when planned for properly, I quite often encounter upon large multisheet detail drawings, that a user when detailing an IAM, will have forgotten to put the IAM view down first, especially later in the drawing series where the IAM is not required and the user is detailing IPT's.
What I am looking for is a way to change which viewport the border properties are related to ideally, so that if a user has forgotten to place the IAM but has placed 20 IPT's down, I could place an IAM outside of the maximum area, as the 21st object but fool Inventor into thinking this was the first viewport placed down, thus populating the border info correctly.
I don't know of a way to do this currently, either with current Inventor functionality, or by programmatic approach - our current fix is to have the user create another drawing sheet, place the IAM outside the maximum area, copy all his IPT viewports across from the first sheet, then delete the first sheet. Is it possible to change the object order of placed viewports with less disruption?
it seems that whenever I input .SAT files into my drawing it really slows down AutoCAD. This is especially true whenever I switch views. It appears to be the regen operation. The drawing is only 10 MB. I can work in much larger drawings that are 2D and not have a problem. I've eliminated all other background tasks and processes that are eating memory.
Is there some sort of work-around/setting I can adjust to reduce quality of the 3D views in order to speed up the regen process?
I use image insert to attach aerial photographs. I would like to use the FDO raster connection, but I keep having a problem with the raster image losing it's display order. I use "display order" in the display manager and move the raster to the bottom, but for some reason it keeps popping above the line work and I have to keep sending it to the back.
I put images in drawings quite frequently as they change from year to year and we monitor a large number of projects yearly. Is image insert still the quickest solution or is there a way to ensure the image will retain it's display order when I do a data connect?
I have several shp files ordered in the display manager. Three Polygons, one line and one point shp. the problem is that the bottom polygon that is supposed to draw order last continues to show up above all other files during plotting to PDF or other digital file. I have tried to disconnect and reconnect the problem shp, reorder several times but nothing changes. This is making it impossible for me to plot a file in the way is it being displayed.
View 7 Replies View RelatedI've been using AutoCAD 2011 for several months, and I'm familiar with most properties such as layers, etc.
I have 2 separate issues, which I'll explain separately.
Issue 1. I have 6-7 named views (same drawing) that I use consistently. However, only 2 of them will cause them to show up. Example: I click View #3 from Views #4,#5,or #6. Nothing happens or changes.OR I can click View #1 or #2 (which will regen/show View #1 or #2), then quickly click View #3 during #1's regeneration, and View #3 regenerates clearly.What can I do to make the others show up independently (just one click required)?
Issue 2.In 2 views in the drawing mentioned above, a couple of blocks don't show up with the rest of the views. If I enter the Regen command, and then they'll show up. If I hadn't tried it the first time, I would have probably missed the blocks entirely and re-created them.What can I do to make them regenerate correctly the first time?
I can't find where to set the display order of layers. I have lines that display under a PDF underlay but I can't drag the layer above the others. They appear to be in alphabetical order, which, while frustrating, I can live with if AC will allow me to easily move layers around some other way.
View 7 Replies View RelatedI am programmatically creating several property defintions inside of a property set definition. I would like to be able to set the display order of the property definitions but the property is read only. How to be able to accomplish this using the API?
View 1 Replies View RelatedIn the "MEP 2014 Whats new .." Presentation is available as a new feature: "Display order by layer," What command (s) is meant here?
View 1 Replies View RelatedWe have a project where we have a combination of CAD data and shape files (connected) with various labels in both formats.
They are in the proper order for both 'Groups' and 'Draw Order' in the 'Display Manager'.
We have two separate viewports, created and named using 'Display Maps' with the applicable layers turned to visible as each viewport requires (some common shapefiles need to be display, some different, some different CAD data also). When we do a regen within one viewport the other non-active viewport immediately loses its draw order (CAD objects appear above the shapefile data). If we switch viewports and Regen then the first viewport will lose its draworder.
Could this be a case for Autodesk Subscription and the developer's to resolve?
When i bring my section views in, the cross sections display on top of each other, i attached a screen capture.
View 2 Replies View RelatedI have a surface and a pipe network. I am trying to print out a picture of these two objects rendered for the engineer to see. I have the surface as a rendered surface, but the pipe network is displaying under the surface (so it is invisible) and I was wondering if there was a way to have the pipe network display "thru" the surface so the engineer can see the pipe network with all the pipes drawn underneath the surface. Is this possible?
View 1 Replies View RelatedHaving trouble with the display order command? It does not work when you right click or when you type in the command. It says command unkown.
View 1 Replies View RelatedIn profile I would like to show the 'Inside Pipe Walls' line on top of the 'Pipe Hatch' is this possible, search some threads haven't found a solution.
View 5 Replies View RelatedSometimes when a drawing is opened in Inventor, the complete design is not visible on the sheet. Only few lines appear on the view.
View 2 Replies View RelatedWe are in the process of updating our pipe network structure label styles. The styles are displaying the inverts in a random order (Please see caption) & we'd like to show the inverts in descending order from highest pipe as first text string & lowest pipe as bottom text string. Is there a way to globally tell civil 3d to always use a descending invert order? Only fix we've found is to disconnect & reconnect the parts in order to adjust invert order.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
A way to change the display order of pipes connected to the structure in a structure label? (plan and profile) Say you have a 10", 6" and 12" pipe connected to a structure, modeled in that order, so label would place them 10, 6, 12. we would like the label to display the order as 6,10, then 12 without having to drag the pipes off and then having to re-input inverts.
View 6 Replies View RelatedSometimes when i creating multiple views (sections) in section display option page there are nothing displaying.(surfaces).
View 2 Replies View RelatedAfter closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies View RelatedI am using a symbol that includes a several text boxes. Each text box includes "prompted text" and "drawing properties". When I insert the symbol onto a drawing, the "Edit Property Fields" menu appears. In this menu, I can input my prompted field text or see the various "drawing properties".
My question is, how do I change the order that these property fields are displayed? It seems as if it depends on the order that the text boxes were created while defining the symbol definition. Is there any other way to change the display order?
We just upgraded to Revit 2014. We had several Revit 2013 models we converted. We are now experience some visual issues within Revit. Specifically, on our Exterior Elevation views, though we are using Hiden Line display, we are seeing some "wireframe" lines, like the double line where the roof is cut, we are seeing our floor betwen levels, etc. I was wondering if it was a Service Pack issue. Issue 1 has been released. I tried to install the patch, and received an error that the product is not installed. I have also downloaded the latest certified video driver, but have not installed that till I tried to get the patch updated.
View 2 Replies View RelatedWhy is there not a Display Order function within a Generic Annotation family, or am I missing this? Specifically when you Mask an area but want some linework graphics in the family to display on top of it.
View 1 Replies View RelatedHow do I get slide shows created on DVD to show slides in the order I load them rather than randomly?
View 1 Replies View RelatedI am using CS 2 on a Mac. I've created about 40 custom paper sizes. They display in random order in the drop down menu. Is this normal and is there any way to organize them?
View 3 Replies View RelatedCan you display the order in which images are shown within an album, (like you could in PE10), other than the stupid Oldest and newest that you now get with PE11?
View 2 Replies View RelatedIs there are a way to display the attached tags for a photo in manual order, rather than how they are sorted in the keyword tag list?
When I assign tags to a photo, these are displayed in the order in which the tags are sorted in the list of tags (either alphabetically or manual).However, what I want to achieve is to display the tags for a photo in the order of i.e. the people shown on the photo.
how to achieve this?
Scanning old photographs, with multiple photos in each scanned image. I've created a virtual copy for each individual photograph and then crop appropriately. However, photographs have different dates and I want to be able to sort them chronolgically. Ideally I'd set the Capture Time on each virtual copy and use that as the Sort order, but LR doesn't separate images co-joined in a Virtual set, so to speak. It seems like it looks at the Capture Time of the Master copy of a virtual set.
The only way I can see how to do this is to export, re-import into a different catalogue, and then apply Capture Time metadata. This is quite a cumbersome workaround. I'd like to do this all in the same catalogue...also exporting / importing re-compresses the image and would like to avoid that.
how to sort on date with virtual copies?
I am really struggling with this and I am not sure why. I simpy want to place a camera or create a view of a 3d drawing and plot a 2d elevation. I want to be able to clip the view to only show that object.
Example: 3d duct drawing, duct risers, I want to pick on riser and arnage it on a viewport. I can get a camera placed but each time it defaults to a perspective view and when I change it to non-perspective the camera disapears.
So I setup a view but no matter what i do I cannot get the clipping to work correctly.
tutorial on createing 2d views of 3d drawings.
I don't want to use sectionplan or a live section the duct program I am using doesn't create actual cad style solids so that won't work.
I really can't beleive I cannot just select two points to determine the view direction and the apply it to the viewport. I have to be missing something.