Why is there not a Display Order function within a Generic Annotation family, or am I missing this? Specifically when you Mask an area but want some linework graphics in the family to display on top of it.
View 1 Replies
I have an AutoCAD dwg file that I would like to import into a Revit generic annotation .rfa file. It's a logo file that we're trying to use for a titleblock. It was originally made into a dwg from an EPS file. I would redraw in Revit but when I try it I get the 'line is too short' error. So it goes.
My problem is this- when I set a RGB value in the AutoCAD file, then import it into Revit with the option to preserve colors, it doesn't show the same color I assigned. I know there are some issues with converting ACAD colors to Revit colors.
I would like to embed a tag as generic annotation within a family so that I can control the visibility of the tag based upon a type shared parameter within the family. However, when I rotate or mirror the family the text and labels within the tag change positions, go backwards, flip upside down, no matter what combiniation of "Keep readable" and Rotate with "Rotate with component" I try.I would like to have the tag look, regardless of which direction the family is facing. How to either:
1. Make the embedded generic annotation maintain the correct orientation
2. Control a tags visibility based upon a shared parameter within the associated family?
I recently built a model-in-place generic model ceiling canopy using Revit 2013. I want to place lights (recessed cans) in the model. Can I change the model type to ceiling or is there a way to place light fixtures in it?
View 2 Replies View RelatedIs it possible to make a tag that shows instance parameters of a generic model family?
Windows 7
RAC2012
I would like to add a "Room Bounding" Parameter / Constraint to a Generic Family I have already created
I have successfully created a Shear wall Family for the core of a building I am modeling.
I've stacked one on top of another and linked it as a project file with a Global "Room Bounding" checked into the main Project File . Geometrically it all works perfectly and even looks right with a concrete fill linestyle. But sadly the instance doesn't appear to realize that it is meant to act like a wall when it comes to adding rooms!
I am trying to create a parametric seating row with a Generic Line Based family.
If you check the file for the Length (default) parameter, I am multiplying it by the Arm Distance (600mm) so that the pattern repeats while I stretch out the line.
=Chairs * 600 mm
I want to add a parameter for the Arm Distance linked with the actual seat so that if I make the chair wider the pattern would adjust accordingly.
=Chairs * Arm Distance3
This way I could adjust the chair width and Line Based family all at once. However, I am finding that when I add "Arm Distance3" to the equation the Line Based feature stops working.
Is it possible to add a rotation control to an annotation family like the ones in elevation tags?
View 2 Replies View RelatedI have some generic labels inside families to display parameters. These work but they seem to randomly disapear.
I thought it was only happening when families were joined as when I unjoined the offending families the labels were visible again but then after closing and opening the view some of the labels have disapeared again.
If I copy this family to a new location the labels will be visible.
Is there any option to show all the data of a family according to the attached jpg?
View 3 Replies View RelatedIs there a way to add a label that will display the family type name. So when i change the type it will change the text?
View 9 Replies View RelatedI'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
How do i get the bend order annotation # with vba?
View 1 Replies View RelatedI have Photoshop CS5.5 with Suitcase Fusion 15.0.5. When I use any kind of typeface in a Photoshop file it appears jagged. When I rasterized the type, the edges are still jagged. It does display the correct font and not defaulting to a generic one. It is just that the curved edges are bad.
I am to figure out if this is a Photoshop or Suitcase issue. I have reinstalled the suitcase plugin, no change. Reset Photoshop to it's defaults. My other apps (e.g. Adobe, Apple and Microsoft), the fonts look great.
reinstalled revit and when i pick wall I can't choose generic walls.
View 2 Replies View RelatedI've created some generic walls and I wanted to overide the material but I can't find a way to do it. I thought I could do it in revit arch 2010 but using properties and edit type but I don't get the materials selection using revit arch 2011.
View 3 Replies View RelatedCreating a particular object for use in a revit project. I have attached a group of images.
In short, it is an arched wall that is made up of a series of masonary objects (6types), each with the same dimensions, the only difference being they have different openings. The objects just need to be represented as a solid masonary for now. The individual objects need to be shuffled around the arch to test different configurations.
Would the best approach be to develop the objects as generic model families?
I have an MEP dwg with 3d geometry that I would like to take a lineweighted section through.
I successfully made the section by importing the cad file into a generic mass, but I cant seem to get the lineweights to show up.
I've tried setting overrides and object styles for generic models, but it doesnt register the cut line, only the projection line style.
I also tried importing as an IFC, which also converts the file to generic models, but no dice.
I am using Revit 2013 and I am wondering if there is any easy way of getting my generic model schedules to get the length of the object without having to manually type it in?!
I have attached 2 images to explain what I am talking about. I have created my own countertops and decided for scheduling purposes it would work best to have them as generic models. As you can see from the "Counter Top Properties" image that it has the length of my countertop in the program, but as the "Counter top Schedule" Images shows I can not choose "Length" as an available field. I had to create a parameter for the length ("Length of Unit"), which is just a dimension parameter, and I have to type in manually what the length is. Is there a way to get my schedule to get that length dimension automatically without having to manually type it in!?
What is Purpose or use of families Template <Metric Generic Model two level based>? Do ceilings are used to make Or decorative elements of the ceiling?
View 2 Replies View RelatedWhen building an annotation template, in the block editor (annotation editor etc..); how do you take the length of a 2D line or pline to be the display of my template?
Doing a water system map and it would be nice to have a line length with the ' symbol at the end rounded to the nearest foot on each length of pipe.
If you have a large project and many outside walls have large sections that are the same can you create exterior dimensions on a number of different levels that are tied together. In other words they are the same annotation done once for all those levels without cutting and pasting or doing the same dimensioning on the different levels, which is very error prone and the chances of different dimsions showing on different levels that are supposed to be the same is very large.
I am thinking of something like bing able to x-ref the dimensions like you can do in autocad. Is anything like this posssible in Revit?
I am used to Autocad Architecture where I typically detail out my sections. I show the top and bottom plates, gypsum wallboard, beam sections, ACT tile layout, etc...
In Revit, the annotation scale seems to be too small to make it look good. I just get thick lines at 1/4" scale - looks sloppy. I have detail set to fine, but it does not seem to do anything until I set the scale to 1-1/2"=1'-0" or greater.
How to actually take a section from start to finish on the sheet. Everyone just shows how you put the section mark down and it automatically creates a section view.... Thats great but there is a lot more to do in my mind, I think I know how to add the callouts and annotation but it does not seem very good if I am not pointing at the insulation or pointing to the beam, etc.
I use image insert to attach aerial photographs. I would like to use the FDO raster connection, but I keep having a problem with the raster image losing it's display order. I use "display order" in the display manager and move the raster to the bottom, but for some reason it keeps popping above the line work and I have to keep sending it to the back.
I put images in drawings quite frequently as they change from year to year and we monitor a large number of projects yearly. Is image insert still the quickest solution or is there a way to ensure the image will retain it's display order when I do a data connect?
I have several shp files ordered in the display manager. Three Polygons, one line and one point shp. the problem is that the bottom polygon that is supposed to draw order last continues to show up above all other files during plotting to PDF or other digital file. I have tried to disconnect and reconnect the problem shp, reorder several times but nothing changes. This is making it impossible for me to plot a file in the way is it being displayed.
View 7 Replies View RelatedI can't find where to set the display order of layers. I have lines that display under a PDF underlay but I can't drag the layer above the others. They appear to be in alphabetical order, which, while frustrating, I can live with if AC will allow me to easily move layers around some other way.
View 7 Replies View RelatedI am programmatically creating several property defintions inside of a property set definition. I would like to be able to set the display order of the property definitions but the property is read only. How to be able to accomplish this using the API?
View 1 Replies View RelatedIn the "MEP 2014 Whats new .." Presentation is available as a new feature: "Display order by layer," What command (s) is meant here?
View 1 Replies View RelatedWe have a project where we have a combination of CAD data and shape files (connected) with various labels in both formats.
They are in the proper order for both 'Groups' and 'Draw Order' in the 'Display Manager'.
We have two separate viewports, created and named using 'Display Maps' with the applicable layers turned to visible as each viewport requires (some common shapefiles need to be display, some different, some different CAD data also). When we do a regen within one viewport the other non-active viewport immediately loses its draw order (CAD objects appear above the shapefile data). If we switch viewports and Regen then the first viewport will lose its draworder.
Could this be a case for Autodesk Subscription and the developer's to resolve?
I've had a request from on of our users to replicate something that has been done for years in 2D CAD. They want a marker to show changes in floor levels that look something like this:-
The annotation needs to be able to read the slab on either side of the step marker and hopefully if possible the difference be represented as text. The datum levels are secondary and it is really the depth of the step that seems to be more important. I do however want to avoid these being just dumb text as if/when the design evolves someone will forget to modify the text.
Here is an example of a few showing two steps in the slab and the results we would want.
I have tried loading/nesting a standard spot level in thinking if I had two in an annotation that this might work, but I was unable to even place a spot marker within the family which makes some sense I suppose.
Is this even technically possible...? I realize the origin usually determines what hosts the family and how, but I guess we are looking for something with a double origin, which is why I think this may not be possible...?
we have this issue that has affected us in Revit 2011 and 2012. For many of our families we have a 3D object, a 2d representation of symbolic lines, and then some editable text/annotation:
- The text is a Generic Annotation annotation family, with a single label, set to display the parameter "Text Frame"
- This family is then inserted into the family of the specific object being created, with, under label's Type Properties, the "Text Frame" of the label being linked with a "Text" parameter in the object family.
This seems to work all fine and dandy, however, we're getting an interesting problem: after working in the file for a while some percentage of the annotation on these families disappear in a view. Sometimes it's just a few, sometimes half, sometimes all of them just go away (everything else, including the symbolic lines, are still there). If you close the file and re-open, they will re-appear. If you nudge them, they will re-appear. Other views may still have them, at least for a time... then they too will dissapear.
This happens both on screen and, dangerously, during printing. You print a whole set, only to discover much of your annotation for objects is gone... (not to mention the cost and waste of trees when you re-print).
Is this a known problem (search only turned up one thread on this), or is there another way to do what I want (have editable annotation on a family) that avoids this issue and I stubmled onto the improper way of doing it?
