Photoshop :: Suitcase Fusion - Display Correct Font And Not Defaulting To A Generic One
Jul 20, 2013
I have Photoshop CS5.5 with Suitcase Fusion 15.0.5. When I use any kind of typeface in a Photoshop file it appears jagged. When I rasterized the type, the edges are still jagged. It does display the correct font and not defaulting to a generic one. It is just that the curved edges are bad.
Â
I am to figure out if this is a Photoshop or Suitcase issue. I have reinstalled the suitcase plugin, no change. Reset Photoshop to it's defaults. My other apps (e.g. Adobe, Apple and Microsoft), the fonts look great.
View 3 Replies
ADVERTISEMENT
Nov 21, 2013
I'm working on a PC in windows 7 and using CS5. I have Extensis Suitcase Fusion 3 for font management but someone told me that this may be why my Illustrator in particular is so slow. I frequently have to sit and wait for it to catch up to me while the top title bar says "Not responding". I don't want to give up my suitcase font manager - I really like it. Surely these programs can get along??
View 1 Replies
View Related
Jun 19, 2012
Why is there not a Display Order function within a Generic Annotation family, or am I missing this? Specifically when you Mask an area but want some linework graphics in the family to display on top of it.
View 1 Replies
View Related
Jul 10, 2012
I have some generic labels inside families to display parameters. These work but they seem to randomly disapear.Â
Â
I thought it was only happening when families were joined as when I unjoined the offending families the labels were visible again but then after closing and opening the view some of the labels have disapeared again.
Â
If I copy this family to a new location the labels will be visible.
View 2 Replies
View Related
Nov 24, 2013
I photograph a bright red car in raw mode on a digital slr (Canon 20D) set to Adobe rgb 1998Â and view it in Breeze Browser and it looks just as I remember it. I open it into Pshop CS5 extended (which is set to Adobe rgb1998, Europe ISO Coated Fogra27, (as I am UK and this is what a calibration company set our works proofer to)Â gray gamma 2.2 dot gain 20% and its become a little desaturated.
Sampling it and comparing screens and colours with Breeze Browser its definitely less red, a bit more orange red instead. I need to up saturation to return the red, both in RAW converter and also after image opened if not done so beforehand in RAW converter. Colors just look muted.
Â
What tests can I carry out to find out what is going on ?
Â
Perhaps create a rgb 255 0 0 image in a way not influenced by photoshop and photo the monitor, then open this in photoshop and sample it. However that would be influenced by the exposure of the camera. Maybe I need to create a Kodak grey card type image and establish correct exposure for the monitor brightness first. so what would that be as rgb ?
Â
I know though that Pshop is displaying duller. Once upon a time we had Adobe gamma and one would go through the calibration wizard to set up Photoshop having already set up the monitor.
Â
What do we have to do after installing CS5 extended or CS4 to ensure Pshops display is correct ?
Â
I have Adobe gamma in the control panel, Is this something we still have to do in CS5, I wonder if its there because I still have Pshop 7 installed which used that wizard.
Â
XP pro is my OS.
View 2 Replies
View Related
Aug 28, 2012
I have tried font 72 and still the font is tiny.
View 2 Replies
View Related
Apr 5, 2013
I'm using "multiple titles" to add text on my slideshow. The font size is 34 but when i play the video the text is much bigger. The text size is changing depending on the length of the text i'm using... How to keep the text size 34 ? When using "single title" option i can't change the position manualy where to put the title so i think i need too use the "multiple titles" for sure.
View 1 Replies
View Related
Aug 28, 2006
I just got suitcase, the font manager. I dont know how to get the fonts from suitcase into Adobe Photoshop CS.
View 2 Replies
View Related
Jan 2, 2013
I'm doing a drag and drop. I'm working on how to check whether the user has dragged and dropped the elements correctly or wrongly in order to display the corresponding animation. That means, all the same type of animals have to be placed together in the same row in order for the animation to display a "correct" feedback, and if the user placed it in the wrong order, it will display the "wrong" feedback. There are 3 types of animals: birds, snakes and insects. The "feedback" animations is in the "feedback_sym".
Â
I have placed a "Reset" button on stage, but it does not appear even after changing the positions on the "Elements" column.
Â
Here is a link to my folder. [URL]
View 1 Replies
View Related
May 21, 2012
correct font style from 1071 group code in style table of dxf file ? I am able to read the Font name and font file name from group 1000 and 3 respectively, but not able to get the font style: whether it is Regular, Bold, Italic etc.
I know i have to decode the long values in 1071 group codes like: 50331682, 50372882 etc. But dont know how to arrive the Regular, Bold, Italic etc Font Style. How to decode this value ?
The requirement of above information to me is that i am making a Graphics viewer for a specific purpose which reads and displays Graphical Entities from DXF (ascii) file.
View 1 Replies
View Related
Oct 18, 2013
When I hit the save for web menu item it can take 5-30 seconds for the dialog box to launch (cs6). Seems that cs6 is doing some heavy disk activity but not sure what its actually writing or doing but I have a fast machine with lots of memory and plenty of CPU yet I get these VERY long delays. All I can find on this problem is that people had suitcase instaslled and I do not. So how I determine what is going on so I can stop this.
View 3 Replies
View Related
Aug 4, 2006
for some reason, all of a sudden photoshop wont display any available fonts in my font list beyond the begining of the letter m. i have tons of fonts. not all of them are turned on. ones that are turned on though and that i have been using up to this point regularly are not accessable now.
View 5 Replies
View Related
Nov 13, 2013
I have recently purchased a Dell XPS15 laptop with a QHD+ (3200x1800) display. The PC is running Windows 8.1. I have also purchased Photoshop Elements 12 to run on it.
Â
With the display at the native resolution, it is necessary to have the "Change the size of all items" option in the display settings of Windows 8.1 set to "Larger", in order for the native Windows fonts and UI elements to be at a reasonable size. The laptop came with this option enabled by default.
Â
However, disappointingly the UI font size in Photoshop Elements is way too small when the display is at the native resolution. The application is basically unusable.
Â
I have tried setting the "Use system font" option in the General preferences, but this doesn't seem to work.
Â
The only way I can get the Photoshop Elements UI font to a reasonable size, is by dropping the screen resolution (to say 1920x1080).
Â
This seems like a terrible waste of a beautiful screen, particularly when my main reason for using the PC is for editing photos, and my photo management and editing software is preventing me exploiting the full resolution of the display.
View 12 Replies
View Related
Aug 20, 2013
The Illustrator and InDesign CC versions cannot read my fonts in Suitcase Fushion 3. Is there any solutions?
View 1 Replies
View Related
Oct 1, 2013
For PSE 11 Organizer, how do I increase metadata display font size?Â
View 2 Replies
View Related
Sep 20, 2010
In CorelDraw X5 the tool What The Font acts very strange on my dual screen setup. My display shifts left, and I cannot draw a selection around the text as my mouse pointer goes out of sync with my screen.
I have a dual screen set up. Using a Dell 23" LCD running at 2048 x 1152 as my main display, I have a second 19" monitor running at 1440 x 900, so two different screen resolutions. The 19" monitor is located to the left of my main monitor, both a running on DVI ATI Radeon graphics card.
View 5 Replies
View Related
Oct 28, 2013
I keep getting the error message "For the Photoshop UI to display correctly, open System Preferences, click Appearance, and turn off text smoothing for font sizes 8 and smaller." I go into preferences and into general but there is no setting to turn off text smoothing for a specific font. I'm in osx mavericks and all it says is "use lsd font smoothing when available" and when I uncheck it, the error message in photoshop still pops up.
View 8 Replies
View Related
Jun 18, 2012
One of my client said his French client gives him the CAD file with French font.
The font can be displayed correctly in Windows, MS Word but not AutoCAD.
View 1 Replies
View Related
Dec 3, 2012
I am using an HTML gallery, with the site title defined thus URL....It works just fine as far as the code goes. The tag does not display but the font size becomes smaller.
Â
It does the same thing with a Flash gallery also.
View 4 Replies
View Related
Jun 28, 2013
 i want this bangala text to be arranged in LED displAY board, exactly the same as posted before)
View 1 Replies
View Related
Apr 11, 2013
Every so often, and I have not been able to determine common cause, when editing mtext in the default mtext editor the text in the editor will display as some other font - handletter, TXT, whatever - something other than the Romans I typically use. And both the style and the font are set to Romans. When I finish editing, the final text in the drawing is correct, so it is more an annoyance than anything.
View 2 Replies
View Related
Jun 19, 2011
why the Arial narrow font used in dwg files from earlier Acad version won't display as expected in Acad 2011/Windows 7/32 Bit.
All text characters display as a very simple thin lines of constant thickness no matter how close you zoom in. Neither can I create new text using A/Narrow though all other fonts work ok.
Files with this issue were created in WindowsXP on a PC and the problem is surfacing on Win7 running on VM Ware Fusion installed on iMac & therefore preventing me from fully migrate over to Mac as I need to work now and again on old files.
View 0 Replies
View Related
Apr 7, 2011
We have problems with some fonts, they display as rectangles on screen but prints just fine. Tested on both a W7 and a XP computer with all patches/updates installed. The same fonts displays fine in other applications...
View 3 Replies
View Related
Mar 22, 2013
why won't gotham font display in Illustrator CS4 business card document?
View 2 Replies
View Related
May 25, 2009
I recently installed a trial version of Photoshop CS2 which was on a disc lent to me. I am now regretting this action because when I go to open a PDF file it defaults to Photoshop instead of Acrobat Reader. When attempting to un-install this trial version of CS2 I get an error message "Error 1324. The path 'My Pictures' cantains an invalid character"
View 10 Replies
View Related
Mar 4, 2008
DVD menu where I went File > New > NTSC DV Wide to create the document, as per the video house's instructions. Now everytime I open ANY file, old or new, a warning pops up to let me know Pixel Aspect Ration Correction is on and to turn it off if I don't want it. This means dozens of times per day, I have to go View > Pixel Aspect Ration Correction just to turn it off.
I can't figure out how to turn this crap off permanently. Why the hell would it default to ON just because I used it once?
View 2 Replies
View Related
Dec 25, 2011
How can I make LR3 not automatically create a TIF file when I open a DNG for the first time? I don't want this to happen. I've checked every preference I can find and can't find any settings to change this. When I try to do a batch run from CS4 on the DNG files, because LR3 creates a TIF files simultaneously, the batch next wants to run on the TIF file LR3 created in the same folder as the DNG files!
View 1 Replies
View Related
Feb 9, 2013
When using Ai CS6 I'm finding that no matter what tools I have selected Ai keeps defaulting to the pen tool, useually Delete Ancor. Have I just not set something correctly??
View 6 Replies
View Related
Oct 13, 2012
I have to manually change the audio setting to capture from the system speakers rather than the mic every time I use it. Its nailed me on more than one occasion, going through hours of lecture and discovering I didn't get the audio.Is there anyway to change it so it defaults to the speakers? Record the speaker output I mean.
View 6 Replies
View Related
Apr 17, 2007
Is there any way to default the "Area to Save" option on the export menu, to "Page"? This is nothing crucial, but it would save me some time, because I select that hundreds of times. If I could pre-define "Page", I would be even more happy
View 8 Replies
View Related
Mar 21, 2013
I downloaded a .step file from a construction website URL..... It is of a screw. Anyway I want to edit the screw but when I open it, it opens as a weird ipt. It's like the part is an assembly but it's not a logo that I worked with before. Anyway I right click on the Base1 file and hit edit form. When I do that Autodesk Inventor Fusion opens. Is there a way I can edit this part in normal Autodesk Inventor or do I have to learn how to use the fusion program?
View 3 Replies
View Related
