CorelDRAW X5 :: What Font On Dual Display
Sep 20, 2010
In CorelDraw X5 the tool What The Font acts very strange on my dual screen setup. My display shifts left, and I cannot draw a selection around the text as my mouse pointer goes out of sync with my screen.
I have a dual screen set up. Using a Dell 23" LCD running at 2048 x 1152 as my main display, I have a second 19" monitor running at 1440 x 900, so two different screen resolutions. The 19" monitor is located to the left of my main monitor, both a running on DVI ATI Radeon graphics card.
View 5 Replies
ADVERTISEMENT
Jun 28, 2013
i want this bangala text to be arranged in LED displAY board, exactly the same as posted before)
View 1 Replies
View Related
Apr 7, 2011
We have problems with some fonts, they display as rectangles on screen but prints just fine. Tested on both a W7 and a XP computer with all patches/updates installed. The same fonts displays fine in other applications...
View 3 Replies
View Related
Feb 26, 2011
Have created a 42 minute movie that includes the accompaniment track and visuals for musical. I will show the movie via large media projector from the computer VGA out. I'm running 3X in Windows 7.
I am able to access extended desktop, duplicate desktop, etc. via function F4.
I need to be able to PAUSE the video (for live drama) and restart without the controls showing on the big screen. I need to be able to SHOW the movie while viewing the CONTROLS on my monitor display.
Can the "project playback" function be set up to play this way? If not, is there a recommended format I should export to to be able to control the movie this way? Any software recommended to show the movie with a public view and a control view on my monitor?
View 5 Replies
View Related
Oct 9, 2012
Any way to show dual dimensions as shown on the right rather than the one which we get on the left
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
View 9 Replies
View Related
Oct 23, 2012
I'm using Win7 with LR4 and have dual monitors. When i switch to the second monitor in LR4 it then displays both LR4 windows on both monitors. In other words it just shows the same thing on each monitor.
View 1 Replies
View Related
Nov 12, 2013
I noticed a "focus" problem using dual screen. When i activate the "Loupe" (1:1 mode) view on the 2nd screen, and i browse my pictures in the developp module (using the film strip and arrows on keyboard for example). The view on the 2nd screen is not displayed as sharp as it should be.
If i touch the detail slider (change the value and make it back to its previous value) the picture is update correctly (sharp) . Do not happen when i use the loupe in "one screen mode".
View 1 Replies
View Related
Jan 5, 2013
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies
View Related
May 3, 2011
I am currently looking to use Corelx5 to operate a laser and to print to a Ricoh printer for sublimation. I would like to know if there is an easy way to toggle between the two. I currently have my defaults set for my document size to match my laser bed, but I also am looking for a way to print to the Ricoh without having to change any settings as I go back an forth. Can I set up two different settings for CorelDraw from one application?
View 1 Replies
View Related
Oct 12, 2011
I want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies
View Related
May 30, 2012
I had posted in another thread about wanting to clean up a signature and make it look more font like. I tried that and it seemed to be pretty difficult due to the amount of random in a hand written signature.
So I think I'd like to approach this from the other direction. I have a font I like but I don't want it to look like the font (way too common). Is there a way to alter the font (not the entire font set or even to create a new font but just for a one word Logo)?
I'd ideally like to connect two of the letters and also modify the shapes of the letters just a bit.
View 4 Replies
View Related
Jun 18, 2012
One of my client said his French client gives him the CAD file with French font.
The font can be displayed correctly in Windows, MS Word but not AutoCAD.
View 1 Replies
View Related
Dec 3, 2012
I am using an HTML gallery, with the site title defined thus URL....It works just fine as far as the code goes. The tag does not display but the font size becomes smaller.
It does the same thing with a Flash gallery also.
View 4 Replies
View Related
Apr 11, 2013
Every so often, and I have not been able to determine common cause, when editing mtext in the default mtext editor the text in the editor will display as some other font - handletter, TXT, whatever - something other than the Romans I typically use. And both the style and the font are set to Romans. When I finish editing, the final text in the drawing is correct, so it is more an annoyance than anything.
View 2 Replies
View Related
Aug 4, 2006
for some reason, all of a sudden photoshop wont display any available fonts in my font list beyond the begining of the letter m. i have tons of fonts. not all of them are turned on. ones that are turned on though and that i have been using up to this point regularly are not accessable now.
View 5 Replies
View Related
Jun 19, 2011
why the Arial narrow font used in dwg files from earlier Acad version won't display as expected in Acad 2011/Windows 7/32 Bit.
All text characters display as a very simple thin lines of constant thickness no matter how close you zoom in. Neither can I create new text using A/Narrow though all other fonts work ok.
Files with this issue were created in WindowsXP on a PC and the problem is surfacing on Win7 running on VM Ware Fusion installed on iMac & therefore preventing me from fully migrate over to Mac as I need to work now and again on old files.
View 0 Replies
View Related
Mar 22, 2013
why won't gotham font display in Illustrator CS4 business card document?
View 2 Replies
View Related
Nov 13, 2013
I have recently purchased a Dell XPS15 laptop with a QHD+ (3200x1800) display. The PC is running Windows 8.1. I have also purchased Photoshop Elements 12 to run on it.
With the display at the native resolution, it is necessary to have the "Change the size of all items" option in the display settings of Windows 8.1 set to "Larger", in order for the native Windows fonts and UI elements to be at a reasonable size. The laptop came with this option enabled by default.
However, disappointingly the UI font size in Photoshop Elements is way too small when the display is at the native resolution. The application is basically unusable.
I have tried setting the "Use system font" option in the General preferences, but this doesn't seem to work.
The only way I can get the Photoshop Elements UI font to a reasonable size, is by dropping the screen resolution (to say 1920x1080).
This seems like a terrible waste of a beautiful screen, particularly when my main reason for using the PC is for editing photos, and my photo management and editing software is preventing me exploiting the full resolution of the display.
View 12 Replies
View Related
Jul 20, 2013
I have Photoshop CS5.5 with Suitcase Fusion 15.0.5. When I use any kind of typeface in a Photoshop file it appears jagged. When I rasterized the type, the edges are still jagged. It does display the correct font and not defaulting to a generic one. It is just that the curved edges are bad.
I am to figure out if this is a Photoshop or Suitcase issue. I have reinstalled the suitcase plugin, no change. Reset Photoshop to it's defaults. My other apps (e.g. Adobe, Apple and Microsoft), the fonts look great.
View 3 Replies
View Related
Oct 1, 2013
For PSE 11 Organizer, how do I increase metadata display font size?
View 2 Replies
View Related
Oct 28, 2013
I keep getting the error message "For the Photoshop UI to display correctly, open System Preferences, click Appearance, and turn off text smoothing for font sizes 8 and smaller." I go into preferences and into general but there is no setting to turn off text smoothing for a specific font. I'm in osx mavericks and all it says is "use lsd font smoothing when available" and when I uncheck it, the error message in photoshop still pops up.
View 8 Replies
View Related
May 22, 2011
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies
View Related
Jul 19, 2013
Private Sub lstFonts_Change() Me.lblFontcboOverLabel = Me.lstFonts.Text Me.lblFontcboOverLabel.Font = Me.lstFonts.Text Me.lblFontcboOverLabel.Font.Size = 12 Fface = Me.lstFonts.TextEnd Sub
I have added this code to display how the font looks (shown below). But notice i have text font set aside. How do i get my test font to display in the "display box" and/or have my font change as i scroll through the list of fonts. I realize corelx6 kind of does this - but it doesn't allow me to single out fonts.
View 1 Replies
View Related
Oct 9, 2012
I don't know what font navigator is for ? what excellently font navigator do?
View 6 Replies
View Related
Sep 24, 2012
My vertical font spacing changes on its own from time to time.
Created a template where my font space was 100% and all looked well and positioned correctly. Used the template to create a few thousand files over 6 months. Then opened the template and some of the files I created and found the font was spaced out more than usual. Somehow Corel interpreted my font spacing differently. I checked the font file and it was the same date/time as before.
I changed the template to 92% to bring it down to the required "correct" position and gradually "fixed" all the files i had created to the 92% spacing. After 6 months or so, I opened the template and a few of the files that had been created using the 92% spacing and all were "squished"... oi.. i changed the template back to 100% and began the long haul changing each of the created files to 100%.
Now i just checked and the spacing is too squished and if i change it to 110% vertical, it appears spaced correctly.
I havent changed the version of corel. I havent changed the computer. I havent changed the font (still the original one from the original source file). I reloaded the font using the original source file several times for kicks and it still requires the 110% spacing to be positioned correctly.
View 1 Replies
View Related
Apr 12, 2011
I'm only using one one color print and I need to put a '''ballerina" hole in a big fat "D". How do I turn the ballerina into a hole? The letter "D" is pink and I of course can put her on the top layer of the "D" but how can I make her a hole?
View 2 Replies
View Related
Jun 5, 2011
I upgraded from CorelDraw 12 to X5 when I upgraded from XP to Windows 7. I thought I transferred all my fonts to the new system. But often when I open old CorelDraw 12 files, X5 tells me that fonts are missing and it offers substitutes which really screw up the document. The fonts it says are missing tend to be fonts I have never heard of! The latest is Centaur.
If I do a search for 'Centaur', a copy of my old system's AdobeFnt.lst comes up, as well as AdobeSysFnt08.lst and AdobeFnt05.lst (I have parts of my old HD on my E:DATA/ drive). I don't know how to open them or how they got to the old disk. Should these be in some way incorporated into my X5 files? Is Centaur a font that used to be in CorelDraw and no longer is? By the way, I have the boxed version, so it should have all the fonts.
View 14 Replies
View Related
Jun 25, 2012
I can not make a lightweight Pdf file.
I want to make a document for display only.
What are your options for this type of work with DRAW X6.
View 3 Replies
View Related
Dec 30, 2012
I'm trying to install the EPS font file in Corel Draw X6 and can't seem to get it to work. The Font Navigator can't find the font and the "Install EPS" function in CDX6 just dumps an image of the whole font into whatever I'm working on.
View 2 Replies
View Related
Jun 10, 2013
I am running x6 on windows 7 64 bit. Recently Corel has started displaying (font not found) next to some of my fonts. When I open Bitsream Navigator it shows that the fonts are installed and in use. I have also checked and made sure that the fronts are installed on the computer itself.
View 5 Replies
View Related
Oct 11, 2013
A few weeks ago, the font list suddenly consolidated font families. Unfortunately, it is awkward and time consuming to run through 30 weights of Future before I find the one I need. How to get rid of the consolidation and put it back the way it was? I have installed Update 4.
View 3 Replies
View Related
