A few weeks ago, the font list suddenly consolidated font families. Unfortunately, it is awkward and time consuming to run through 30 weights of Future before I find the one I need. How to get rid of the consolidation and put it back the way it was? I have installed Update 4.
View 3 RepliesI just opened up X6 to find my font list is significantly wider than it should be.See image at below.
BTW, I have tried to reset (F8) the workspace.
I'm using v 16.1.0.843.
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedImages and folders added in LR5 are showing up separate from those in LR4. The drive appears twice, with the folders added before the upgrade and now with the folders added since. If I do "show in finder" it knows they are in the same drive location.
How can I consolidate them in the left sidebar?
How to edit text around a circle after it has been consolidated (saved as jpg) and decomposed again in layers.
View 1 Replies View RelatedI want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies View RelatedI had posted in another thread about wanting to clean up a signature and make it look more font like. I tried that and it seemed to be pretty difficult due to the amount of random in a hand written signature.
So I think I'd like to approach this from the other direction. I have a font I like but I don't want it to look like the font (way too common). Is there a way to alter the font (not the entire font set or even to create a new font but just for a one word Logo)?
I'd ideally like to connect two of the letters and also modify the shapes of the letters just a bit.
I can't find any of my fonts since they are not in alphabetic order. I don't have many fonts installed, cs5.
View 6 Replies View RelatedHow can I print a font list in lightroom 3?
View 1 Replies View RelatedThere are a bunch of fonts on my font list inside PS and yet they're not on my system when I look in Windows|Fonts folder.
How do I clear these off the program list?
Where does PS get it's font list from:
There are a bunch of fonts on my font list inside PS and yet they're not on my system when I look in Windows|Fonts folder.
How do I clear these off the program list?
Where does PS get it's font list from: the Windows font list or somewhere else?
Wow, I am trying to ask about the lack of fonts in Gimp 2.8.4, when I cannot find a font list or size list here on this document!
Edit/ Preferences states that the fonts are to be found in the following directories:
C:UsersHubert.gimp-2.8fonts
C:Program FilesGIMP 2sharegimp2.0fonts (note the '2.0')
The first one is empty, and the second one does not exist.
This problem has been mentioned on the internet, but no answer has yet been stated.
I don't know how to populate those spaces with fonts that can be used by Gimp.
DO YOU?
after installing new fonts I downloaded, I cannot get a sample, or even the name listed, of the font in the character panel of any of the new fonts. All the previously installed fonts show up fine. The new fonts have samples in Photoshop, Microsoft Word, etc, just not in Illustrator. Is there some way I can change this in Illustrator?
View 2 Replies View RelatedI'm running on a macbook pro OS 10.7.4 and illustrator 5.5 crashes everytime I open a new document, select the type tool and scroll through the font list from the font menu list. It scrolls about 25% down the list then crashes the software.
View 27 Replies View Relatedwhere the setting for the size of type/font preview drop down is located in CS6, it used to be located under pref->type->type preview - but apparently not anymore. I'm probably "blind", they surely did include this option in CS6?
(A thing I find annoying in CS6 is how short the font drop down list is, only covers 1/3 of the height of my resolution, even though I have hundreds of fonts activated - requires a lot of scrolling! I really hope this gets larger if it is possible to have larger previews)
the normal form of Arial Black is not showing up on my font list in Photoshop.
Only the italic version is available for use.
I have verified in the Windows Font folder that both styles are installed.
for some reason, all of a sudden photoshop wont display any available fonts in my font list beyond the begining of the letter m. i have tons of fonts. not all of them are turned on. ones that are turned on though and that i have been using up to this point regularly are not accessable now.
View 5 Replies View RelatedIn AI CS4. XP
I thought after having the newest version of Illustrator I would be able to have a text box selected & scroll through the font list to see the different fonts change on the text using the arrow up/down keys.
I seem to only be able to scroll through 2-3 fonts & then it stops, which is very frustrating because I am so used to doing it in ID & PS.
What I can do? Picking each font one by one is time consuming.
I'm building a script that will open a dialog box allowing the user to select a font family from a drop down list (not a list of all of the fonts), and then compare that value against the fonts that are in use, highlighting everything that doesn't match. I have not yet built the dialog, but I've got everything else working as I want except the list of font families.
The following code loops through the list of fonts (only 20 for testing purposes), compares the family name to the previous on the list (error trapped for the first loop), and pushes the family name (if it doesn't match the previous) into an array which will be used in the dialog box. With the two alerts at the bottom (for troubleshooting), I expect the alerts to show the same family name. For the first three fonts they do, but after that the array value is "undefined."
var iCount = 20;
//var iCount = textFonts.length;
var nameHolder = "";
var nameArray = new Array();
[Code]...
Questions:
1) Any speculation on why this behavior is happening (it isn't truetype versus opentype)?
2) Is there a better way to get the list of font families without duplicates??
2) Is an array the best way to populate a dropdown list in a JS dialog box??? [this will be my first dialog with a dropdown, the others have user-typed values]
EDIT: Additional Info
When it reaches the ninth font in the list, the above script starts writing undefined, but when tested manually, as below, it works fine. Hmmm.
alert (textFonts[9].family);
var nameArray = new Array();
nameArray.push(textFonts[9].family);
alert (nameArray[0]);
EDIT: More info
tried replacing nameArray.push(familyName); with nameArray.splice(i,0,familyName); bad behavior remains
I would like to modified the existing pointlist.xsl.
I would like to use a different font and adjust the text heights smaller, like a 8 pt. for the points, 12 pt for the heading and 6 pt for report data.
I do not see any text size in the file, so how do change these.
Also are there any other point list report available?
Am working as a technical editor for a medical university, I got an earlier job file of their booklet, so I was wondering is there any way to get to know which fonts are used in the whole booklet, as I am assigned to re-arrange the whole booklet but keeping the current fonts & spacings. Finding fonts manually seems impossible as it got more then 160 pages
View 3 Replies View RelatedI recently updated my corel x6 and have noticed some of the fonts are missing from the list in the drop down box?
I had maybe 8/9 versions of Futura for example, now I only have 2. I haven't changed any settings other that do the auto update.
Why can i not see the list of options on the right hand side of some pages that allow us to "Suggest an answer", "Add to favorites", etc.
Some pages have them & some don't ...any reason why?
Private Sub lstFonts_Change() Me.lblFontcboOverLabel = Me.lstFonts.Text Me.lblFontcboOverLabel.Font = Me.lstFonts.Text Me.lblFontcboOverLabel.Font.Size = 12 Fface = Me.lstFonts.TextEnd Sub
I have added this code to display how the font looks (shown below). But notice i have text font set aside. How do i get my test font to display in the "display box" and/or have my font change as i scroll through the list of fonts. I realize corelx6 kind of does this - but it doesn't allow me to single out fonts.
The recent files are not listed in the welcome dialog box or under file menu recent files drop down list? How I can get it to list again?
View 1 Replies View RelatedWhen I try to enter text and select the drop down menu for font selection, my list of font styles does not show up until you put your cursor over a spefic font. Otherwise the list is blank. I tried to install the repair feature from the disk but that didnt change it.
View 1 Replies View RelatedI don't know what font navigator is for ? what excellently font navigator do?
View 6 Replies View RelatedMy vertical font spacing changes on its own from time to time.
Created a template where my font space was 100% and all looked well and positioned correctly. Used the template to create a few thousand files over 6 months. Then opened the template and some of the files I created and found the font was spaced out more than usual. Somehow Corel interpreted my font spacing differently. I checked the font file and it was the same date/time as before.
I changed the template to 92% to bring it down to the required "correct" position and gradually "fixed" all the files i had created to the 92% spacing. After 6 months or so, I opened the template and a few of the files that had been created using the 92% spacing and all were "squished"... oi.. i changed the template back to 100% and began the long haul changing each of the created files to 100%.
Now i just checked and the spacing is too squished and if i change it to 110% vertical, it appears spaced correctly.
I havent changed the version of corel. I havent changed the computer. I havent changed the font (still the original one from the original source file). I reloaded the font using the original source file several times for kicks and it still requires the 110% spacing to be positioned correctly.
I'm only using one one color print and I need to put a '''ballerina" hole in a big fat "D". How do I turn the ballerina into a hole? The letter "D" is pink and I of course can put her on the top layer of the "D" but how can I make her a hole?
View 2 Replies View RelatedI upgraded from CorelDraw 12 to X5 when I upgraded from XP to Windows 7. I thought I transferred all my fonts to the new system. But often when I open old CorelDraw 12 files, X5 tells me that fonts are missing and it offers substitutes which really screw up the document. The fonts it says are missing tend to be fonts I have never heard of! The latest is Centaur.
If I do a search for 'Centaur', a copy of my old system's AdobeFnt.lst comes up, as well as AdobeSysFnt08.lst and AdobeFnt05.lst (I have parts of my old HD on my E:DATA/ drive). I don't know how to open them or how they got to the old disk. Should these be in some way incorporated into my X5 files? Is Centaur a font that used to be in CorelDraw and no longer is? By the way, I have the boxed version, so it should have all the fonts.
I have done it in a lot of steps. There must be a simple way to do it.
View 3 Replies View Related