CorelDRAW X5 :: Font Space Changes

Sep 24, 2012

My vertical font spacing changes on its own from time to time. 

Created a template where my font space was 100% and all looked well and positioned correctly.  Used the template to create a few thousand files over 6 months.  Then opened the template and some of the files I created and found the font was spaced out more than usual.  Somehow Corel interpreted my font spacing differently.  I checked the font file and it was the same date/time as before.

I changed the template to 92% to bring it down to the required "correct" position and gradually "fixed" all the files i had created to the 92% spacing.  After 6 months or so, I opened the template and a few of the files that had been created using the 92% spacing and all were "squished"... oi.. i changed the template back to 100% and began the long haul changing each of the created files to 100%.

Now i just checked and the spacing is too squished and if i change it to 110% vertical, it appears spaced correctly.

I havent changed the version of corel.  I havent changed the computer.  I havent changed the font (still the original one from the original source file).  I reloaded the font using the original source file several times for kicks and it still requires the 110% spacing to be positioned correctly.

View 1 Replies


ADVERTISEMENT

CorelDRAW Graphics Suite X6 :: Font Manager Alternative Nexus Font / Or Other Compared To Bitstream Font Nav

Jan 5, 2013

I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?

View 13 Replies View Related

CorelDRAW Graphics Suite X3 :: All Font Headings In Font Box Are Not Highlighted

Oct 12, 2011

I want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?

View 5 Replies View Related

CorelDRAW X4 :: Make Logo Font Look Less Like Original Font?

May 30, 2012

I had posted in another thread about wanting to clean up a signature and make it look more font like. I tried that and it seemed to be pretty difficult due to the amount of random in a hand written signature.

So I think I'd like to approach this from the other direction. I have a font I like but I don't want it to look like the font (way too common). Is there a way to alter the font (not the entire font set or even to create a new font but just for a one word Logo)?

I'd ideally like to connect two of the letters and also modify the shapes of the letters just a bit.

View 4 Replies View Related

AutoCad :: Quickly Change All Font Size Across Entire Model Space

Feb 23, 2012

Is there a way to quickly change all text font in model space in autocad electrical 2009 rather than doing it manually for every text block?

View 6 Replies View Related

CorelDRAW X6 :: Drawing Space Changes

Apr 15, 2012

I'm looking into upgrading from 12 (yeah, I know, archaic) to X6. One of the things I run into frequently is running out of drawing space. I do a lot of architectural floor-plan semi-precision mock-ups, and even though I use 1' = 1" scale, I usually run out of space on larger drawings.

Is there an increase in the available drawing space between 12 and X6?

View 5 Replies View Related

CorelDRAW X6 :: How Font Looks Like

Jul 19, 2013

Private Sub lstFonts_Change()   Me.lblFontcboOverLabel = Me.lstFonts.Text   Me.lblFontcboOverLabel.Font = Me.lstFonts.Text   Me.lblFontcboOverLabel.Font.Size = 12   Fface = Me.lstFonts.TextEnd Sub

I have added this code to display how the font looks (shown below). But notice i have text font set aside. How do i get my test font to display in the "display box" and/or have my font change as i scroll through the list of fonts. I realize corelx6 kind of does this  - but it doesn't allow me to single out fonts.

View 1 Replies View Related

CorelDRAW X3 :: How To Equally Space Objects

Nov 14, 2011

how to equally space objects  in X3. I seen it done at a seminar but cannot remember how to do it.

View 12 Replies View Related

CorelDRAW X6 :: Font Navigator

Oct 9, 2012

I don't know what font navigator is for ? what excellently font navigator do?

View 6 Replies View Related

CorelDRAW X4 :: Put Hole In Font (Big Fat D)?

Apr 12, 2011

I'm only using one one color print and I need to put a '''ballerina" hole in a big fat "D". How do I turn the ballerina into a hole? The letter "D" is pink and I of course can put her on the top layer of the "D" but how can I make her a hole?

View 2 Replies View Related

CorelDRAW X5 :: Font Substitutions

Jun 5, 2011

I upgraded from CorelDraw 12 to X5 when I upgraded from XP to Windows 7. I thought I transferred all my fonts to the new system. But often when I open old CorelDraw 12 files, X5 tells me that fonts are missing and it offers substitutes which really screw up the document. The fonts it says are missing tend to be fonts I have never heard of! The latest is Centaur.

If I do a search for 'Centaur', a copy of my old system's AdobeFnt.lst comes up, as well as AdobeSysFnt08.lst and AdobeFnt05.lst (I have parts of my old HD on my E:DATA/ drive). I don't know how to open them or how they got to the old disk. Should these be in some way incorporated into my X5 files? Is Centaur a font that used to be in CorelDraw and no longer is? By the way, I have the boxed version, so it should have all the fonts.

View 14 Replies View Related

CorelDRAW X6 :: Convert Color Space On Import?

Apr 7, 2013

Is there a way to have CorelDRAW automatically convert imported objects to the document color space?

In "Tools > Color Management > Default Settings..." I have "Import and paste:" settings all set to "Convert to document color profile". Yet if I have a CMYK document, when I import an RGB JPEG, it will remain RGB.

Is there some other setting that will accomplish this? I'm constantly ending up with elements in both color spaces.

View 6 Replies View Related

CorelDRAW X6 :: Space Bar Move Object As It Created?

Jan 9, 2013

I'm a long time user and fan of Corel Draw; are there any plans to mimic Adobe when you draw and move a primitive in Corel Draw.

I love the feature in the Adobe Suite that lets you start a selection or primitive shape and dynamically move and place the shape as you'reinitially marking out it's width and Height "by holding down the space bar". I find this less constricting as you can begin draw the shape from anywhere on the page and move it anywhere before you commit to the size and placement.

View 14 Replies View Related

CorelDRAW X6 :: Installation Of EPS Font Files

Dec 30, 2012

I'm trying to install the EPS font file in Corel Draw X6 and can't seem to get it to work. The Font Navigator can't find the font and the "Install EPS" function in CDX6 just dumps an image of the whole font into whatever I'm working on.

View 2 Replies View Related

CorelDRAW X6 :: Font Not Found On Windows 7?

Jun 10, 2013

I am running x6 on windows 7 64 bit. Recently Corel has started displaying (font not found) next to some of my fonts. When I open Bitsream Navigator it shows that the fonts are installed and in use. I have also checked and made sure that the fronts are installed on the computer itself.

View 5 Replies View Related

CorelDRAW X6 :: Font List Consolidated

Oct 11, 2013

A few weeks ago, the font list suddenly consolidated font families. Unfortunately, it is awkward and time consuming to run through 30 weights of Future before I find the one I need. How to get rid of the consolidation and put it back the way it was? I have installed Update 4.

View 3 Replies View Related

CorelDRAW X6 :: Bitstream Font Navigator (64-Bit)

Dec 14, 2012

I work with Corel X6 and Beatstream Navigator on regular basis. During start and save Corel & Beatstream make changes inside Windows system font (In my case Sagoe UI) and compromise it's usage for Adobe Photoshop CS6.

It's crash core menus and banners inside PS6.

Problem go away if you uninstall Bitstream Font Navigator.

Is there any other newer type manager or any other solution to solve this problem?

View 4 Replies View Related

CorelDRAW X3 :: Font Navigator Just Freezes Up

Oct 3, 2012

I put corel draw x3 on a new  laptop with window 7 and the bitsteam font navigator will not work. Well actually it worked once, then when I went to add more fonts (find fonts) it just freezes up. I have uninstalled and re installed it and still have same problem. Never had this problem on windows xp.

View 2 Replies View Related

CorelDRAW X4 :: Converting Mangal Font

Aug 7, 2011

I have a word file in Hindi Mangal Unicode font and I can't convert it to Corel file which is necessary for print. Is there anyway to do it?

If I do it right now, font changes in corel at some places and it's distorted.

View 1 Replies View Related

CorelDRAW X6 :: Text Fails To Appear For One Certain Font

Dec 12, 2012

I have a font I use all the time and have for years (Myriad Pro). When I create a new text object and then select the font from the list the text object disappears and the resize handles goes really small.

While mousing over the font the text appears:

However when I select that font this happens:

The object still appears in the object list not clearly no characters are showing. Nothing shows in Wireframe mode as well.

I've deleted the fonts and installed them again and still occurs. Only on this one font family.

I am running CorelDRAW X6 16.2.0.998

View 3 Replies View Related

CorelDRAW X5 :: Reduce Thickness Of The Font?

Aug 16, 2012

may i knw hw to reduce an thickness of a particular text to a line.. i have attached an screenshot on hw it is.. and wt output i need.  #mce_temp_url# 

View 14 Replies View Related

CorelDRAW X5 :: What Font On Dual Display

Sep 20, 2010

In CorelDraw X5 the tool What The Font acts very strange on my dual screen setup. My display shifts left, and I cannot draw a selection around the text as my mouse pointer goes out of sync with my screen.

I have a dual screen set up. Using a Dell 23" LCD running at 2048 x 1152 as my main display, I have a second 19" monitor running at 1440 x 900, so two different screen resolutions. The 19" monitor is located to the left of my main monitor, both a running on DVI ATI Radeon graphics card.

View 5 Replies View Related

CorelDRAW X3 :: Change Interface Font?

Jul 24, 2011

Is there any way to increase the interface font size?  I'm getting eye stain.

View 6 Replies View Related

CorelDRAW X6 :: Subscript With Font Increase 33%

Aug 29, 2013

(i) Subscript selected text

(ii) increase font size 33%

(iii) Same for Superscript

View 2 Replies View Related

CorelDRAW X5 :: Font Conversion To Outlines

Apr 10, 2012

We get .eps files from a customer and the fonts have been converted to "outlines" or "curves". This one font they used is Avant Garde Condensed and whenthe lowercase letters "f" and "i" are used together like in the word "fish" are connected together with no dot over the "i" (see attachment).

My question is this:

Is this supposed to look this way (see attachment) is this some sort of special character in the Avant Garde font family? Or is this some sort of freak accident caused by converting fonts to outlines?

View 6 Replies View Related

CorelDRAW X6 :: Automate TTF Font Export Via VBA?

Sep 14, 2013

I am looking into making TTF file creation from CorelDRAW a little easier. If I record a macro of exporting a single character I get the very basics - just a filename and all it does is pop up the export window where one needs to select the character, set the size, etc. Rather time consuming and awkward.

is there a way to automate this? Just set which character is being saved, set the size and so on? Unfortunately the ExportOptions and ExportFilter structures seem to be basically undocumented (or I don't know how to find their options).

View 2 Replies View Related

CorelDRAW X6 :: Font Playground Not Showing?

Aug 21, 2013

after the upgrade to 16.4.0.1280 I don't see the Font Playground option under the Text menu. 

I have Win 7 pro 64 bit

View 4 Replies View Related

CorelDRAW X3 :: Getting Installed Fonts To Appear In Font Box?

Mar 28, 2013

I bought a new laptop and installed my x3, and I am having problems getting the installed fonts to appear in my font box on corel...

View 3 Replies View Related

CorelDRAW X6 :: Font Is Jagged / Not Smooth

Oct 1, 2012

Now for some reason when I upload a logo to a site. The font is jagged and not smooth.

View 1 Replies View Related

CorelDRAW Graphics Suite X3 :: Same Font / Different Looks

Sep 8, 2011

It's concerning the font SF Movie Poster

Two machines, both with XP, Corel Draw X3 13.0.0.576 and SF Movie Poster installed -  BUT two different outputs.

Both Corels open the file and the characters with SF Movie Poster (I checked it by clicking in the words)

e.g. figure 1:

The first machine shows the number one as The other machine shows it like 1

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: How To Use Arc Font

Apr 16, 2013

I am new to Corel Draw. How do I arc font? I have a customer that wants some writting arced above her logo and below her logo. The only way I know how is to creat a circle and "Fit Text To Path". But then I can't seem to delete the circle without erasing the writting as well.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved