I'm looking into upgrading from 12 (yeah, I know, archaic) to X6. One of the things I run into frequently is running out of drawing space. I do a lot of architectural floor-plan semi-precision mock-ups, and even though I use 1' = 1" scale, I usually run out of space on larger drawings.
Is there an increase in the available drawing space between 12 and X6?
I have drawn two squares. one is 20mm sq and the other is 15mm sq.
I placed one square inside the boundery of the other and selected NO FILL..Yet when I import the image into my Laser Engraving program, the empty space between the borders of the two squares is FILLED...
How to stop the FILL happening ?????
how do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View RelatedI am having trouble scaling my drawing between model space and paper space. I have it drawn in model space at 1:1, and I set the viewport scale in paperspace to 1:15. However, it does not show up as 1:15. I have drawn a 50' line in model space. The viewport is 4" wide in paperspace, so you should be able to see the whole line in the viewport at a 1:15 scale, with some space on each side. However, it does not. I can only see a small fraction of the line.
View 8 Replies View Relatedhow to get a drawing from model space onto the layout space. I know it's simple but I can't remember how!
View 9 Replies View RelatedPaper space was just introduced the last time I used AutoCAD professionally. I didn't become familiar with it and it seemed like an unfathomable concept then; at least from the way it was explained to me.
So I did some drawing for this guy all in paper space...that was what first opened up in AutoCAD. After five hours and getting ready to send the files, I realize that maybe I should a done it in model space. Is it really going to make that much of a difference? If he wanted me to redo it in model space .
I am able to get the drawing extents in the database but just fine except that when I draw objects in paper space and the extents decrease the properties Pextmax and Pextmin do not change accordingly. When I make objects larger everything is fine, I capture the change just fine. Where else to look or if there is a method to update this properly?
Public Sub CheckMedia(ByVal Printers As Collection)
Try
Dim oEditor As Autodesk.AutoCAD.EditorInput.Editor = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor
Dim oDatabase As Autodesk.AutoCAD.DatabaseServices.Database = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Database
[code].......
I have a .dwg that displays a tumbnail of a corridor that I created. The file is large, 123MB, however when it is opened the vast majority of the drawing does not exist. As in with all layers turned on nothing appears, the surfaces do not show up in the prospector, nor does the corridor or any assemblies. The drawing is far too large for what is in it, there is one surface and minimal layouts. Additionally the mouseover previews for the layout tabs display correctly what should be there, however when the layout tabs are actually selected, they are blank. Restoring from backup does nothing. Attempting to purge etc. does nothing. Attempting to insert the entire drawing into a blank drawing causes autocad to crash with a memory read exception. (That tried on multiple machines with identical results.) I'd say that everything got deleted, but the file size indicates otherwise. cntrl-A finds nothign other than what I can see and select normally.
View 9 Replies View RelatedI have received a drawing that is only showing in the first layout tab on a contractor's template. The drawing is in a viewport of course. The drawing does not show in the model space.
1. Is it possible to send a drawing only in the Layout tab?
2. Is it possible for me to do something to view the drawing in model space and how is it done?
3. Could it simply be a compatibility issue between the contractor's.
I use parametric base-model which automatically generates drawing (look "Pic1"). I change parameters I need and new drawing is generated (scale stays the same). However, dimensions on new drawing are displayed in random way (look "Pic2"). Is there a way (iLogic, VBA or smth els) to fix/link dimensins so - that they could stay in an appropriate way (space between dimensions, space between dimension and edge, dimension is centered on line with arrows) when the model size is changed (in this example I have changed the base diameter from 830 to 1280)?
Function "Arrange dimension" does not solve the problem!
when im switching my drawing into paper space and then trying to print it my drawing is massive and only small part of it id in the peper space.
View 9 Replies View RelatedI have drawn a dwg drawing with few new layers and copy paste few layers from another dwg drawing. But I when I change from model space to paper space I cannot see anything. Drawing cane be seen on model space but in paper space it totally disappeared.
View 6 Replies View Related1.how to differentiate the one drawing in model space using mm and the other one using cm, other one is using m?
2. am confused to know how to configure the units setting, and if someone set mm or cm in modal space does the auto-CAD detect the respective unit setting? e.g. one is using mm and he/she offset 1 unit, say mm, and suddenly i want to change the one unit offset to be m or cm, how does it work?
3. if some one has drawn in m, and i want copy and paste in new MS but i want continuing using different units say mm how does it work?
If you're an Illustrator user, you may be familiar with the ability to move the active anchor point of the line, by holding "Spacebar" and dragging during the drawing process. This is a useful timesaver for creating complex paths. While Photoshop CS6 has introduced some useful new path-editing features, this is one that is still missing.
I cant' figure out why Adobe does not make the pen tool identical between the two programs. This is an old feature in Illustrator. Don't the Adobe programmers talk to each other.
I just recently started using AutoCAD again after using Inventor for several months, and I'm having a very difficult time with annotations. I'd like to annotate the proper way, and I believe that's from withing layout space. I have several small weld details that simply need to be laid out on this drawing. They're all drawn to 1:1 scale, and I'd like to use Viewports to scale them up or down as appropriate.
How to properly annotate dimensions, text, and weld details such that they will all appear of uniform size among all details, but will be associative with respect to the geometry of each detail? This is quite simple in Inventor simply because of how it's designed to work, but AutoCAD works very differently and I'm very unfamiliar with how to work with text styles and dimstyles and weld-symbol styles in this manner. I can't get my annotation styles to work right.
i'm working on a drawing started by someone else. They do everything in model space...no paperspace and no viewports. drawing and border are both in model space. I'm not used to just model space.
How do i set the scale of the drawing in model space? do i need to use different size borders to get the correct scale? I'm drawing everything 1:1 and i need my final prints to be on 11x17 paper.
on a previous drawingi see that they used a scale of 1/16"=1' but how they determined this scale. going thru other sheets in the setd of drawings it seems that they used different border sizes (but all are printed on 11x17 paper)...some are printed not to scale if they have no set scale...like details.
example of what i need to do:
I need to show a building rooftop plan view (the entire rooftop) on one sheet. on the next sheet i need to zoom into a portion of the rooftop.
normally i would use viewports to do this. but in model space i dont see how this is done. do i need to have a set of different size borders? but how then can i print them on 11x17 without using "scale to fit"?
acad C3D 2011
I have to add dimensions to an architectural drawing in model space
The file is drawn in decimal units (1unit=1meter)
Now I have been asked to ad dimensions in feet and inches to the drawing in order to make it usable to UK
I know that the solution is to use alternate units with Architectural units format, but how mach is the multiplier that I have to use?
I have no experience in British metric system.
So I left the multiplier 25.4 as AutoCAD prompt.
2.81 meters equals to 5'-11 1/4” ?
I’m using AutoCAD 2007
is there any point when you set up a new drawing in setting the drawing limits.
For example I am about to draw up a house plan at scale 1:100 which will be plotted on an A3 sheet. I envisage the floor plans will be on one A3 and the Elevations will be on another A3 sheet. Sections will go on another A3. I will have approx 6 paper sheets set up for this.
I plan to draw the whole lot in model space. Then move it around in paper space so each item is on a seperate sheet.
Is this the correct way to do it. If it is, then what is the point of having drawing limits in Model space? The books I have, say it is good drafting practice to set up limits. But I can't see why Also what is the point of setting up the grid display when half the time you draw right off the grid?
My drawings appear small in paper space than they do in model space. How do i get them to fill the paper space?
View 9 Replies View RelatedI'm having a problem with Zoom Extent on a poticular drawing. when zooming normally with the scroll wheel it will work with no problems at all.
When I do a Zoom Extents everything in the Model window disapears even the viewcube and small tool bar and minimize and close buttons. but if i go to where the minimzie and close is and click my mouse picks up the command.
If i do a undo i get everything back.
Before Zoom Extents
before ZE.jpg
After Zoom Extents
blank window.jpg
Would this be a system varible or a driver issue. it only seems to do it with this drawing and when this drawing is Xref'ed into another drawing.
I have purged, audit and checked scales. but i'm still getting this problem.
I've got a persisitant problem with the publishing feature in autocad. I know how to set up bulk print of drawings using publish.
However the drawings are a mixed lot (some in paper some in layout). Is there a way to determine the state of the drawing without opening each one. In my case there is thousands of drawings and of course i do not have the manpower to inspect each one.
I have started to use Selection Set Manager for drawing previewing and publishing. I was moving drawings that are one to one to paper space to allow SSM usage but I recently found that my client does not want me moving drawings to paper space. He wants to keep his drawings in model space for one to one drawings (electrical schematics, one lines etc).
How can I use SSM for these model space drawings?
I'm trying to get a drawing flipped round in model space so it fits more neatly in a viewport. I need to rotate the model space by about 45 degrees so that a line that looked about 45 degree slope up from left to right becomes a flat line.
I've been trying to use 'ucs' in the command line and then type the degree rotation as this is what it says in the help section but it doesnt do what i want. It asks for an origin point on the x-axis and then i dont know what this means.
I am new to Autocad, Everything was working fine until now...I can access a command via command line or menu or toolbar just fine, but although the command line prompts are working, the model space is not showing my lines, circles, rectangles etc. Nothing new is appearing on my model space. I am not sure what I accidentally changed. This is only true in this particular file, my other files are working fine.
View 1 Replies View RelatedI have a drawing that is shwing model space empty, nothing in it, however on paper space the drawing is there. I can double click my viewport and able to use my drawing commands as normal. what has happened how come i cant see my drawing in model space, like it is hidden, i have tried regen, redraw etc.
View 6 Replies View RelatedI am trying to dimension a 1/8" drawing (in model space) and the text height on the dimensions is so small it is not even readable. I have tried modifying the dimstyle to have an "Overall Scale" of 96 (under 'Fit') and a "Scale Factor" of 1 (under 'Primary Units') and vice versa, but neither is working. I have never had this problem before. I am working in AutoCAD Architecture 2010. Also, when i try to dimension this in paper space, the size comes out ok but it is saying a 6' line is 576'... I would rather dimension in model space anyway but what's up with this? I realize 6 times 96 is 576 but how do you get it to be the right length in paper space?
View 9 Replies View RelatedI have autocad lt 2204
I'm having trouble inserting a jpeg to a drawing in paper space.
Everytime I open ACAD2013 and start from the "drawing1" position, model space is unworkably small, we are talking mm here.
How do I ensure that upon opening I have a workable sized model space ?
I recently, can not enter my steel of drawing space.
The following warning displays.
As of today's update to Illustrator 17.1 it seems that you cannot use the spacebard while in the middle of drawing a shape (a rectangle, circle, etc.) any more. I don't see a preference to turn this back on. This was an incredibly useful feature.
View 21 Replies View Related