AutoCAD Civil 3D :: Drawing Does Not Appear But Takes Up Space?
May 19, 2013
I have a .dwg that displays a tumbnail of a corridor that I created. The file is large, 123MB, however when it is opened the vast majority of the drawing does not exist. As in with all layers turned on nothing appears, the surfaces do not show up in the prospector, nor does the corridor or any assemblies. The drawing is far too large for what is in it, there is one surface and minimal layouts. Additionally the mouseover previews for the layout tabs display correctly what should be there, however when the layout tabs are actually selected, they are blank. Restoring from backup does nothing. Attempting to purge etc. does nothing. Attempting to insert the entire drawing into a blank drawing causes autocad to crash with a memory read exception. (That tried on multiple machines with identical results.) I'd say that everything got deleted, but the file size indicates otherwise. cntrl-A finds nothign other than what I can see and select normally.
View 9 Replies
ADVERTISEMENT
Dec 19, 2012
i'm working on a drawing started by someone else. They do everything in model space...no paperspace and no viewports. drawing and border are both in model space. I'm not used to just model space.
How do i set the scale of the drawing in model space? do i need to use different size borders to get the correct scale? I'm drawing everything 1:1 and i need my final prints to be on 11x17 paper.
on a previous drawingi see that they used a scale of 1/16"=1' but how they determined this scale. going thru other sheets in the setd of drawings it seems that they used different border sizes (but all are printed on 11x17 paper)...some are printed not to scale if they have no set scale...like details.
example of what i need to do:
I need to show a building rooftop plan view (the entire rooftop) on one sheet. on the next sheet i need to zoom into a portion of the rooftop.
normally i would use viewports to do this. but in model space i dont see how this is done. do i need to have a set of different size borders? but how then can i print them on 11x17 without using "scale to fit"?
acad C3D 2011
View 9 Replies
View Related
Oct 18, 2012
When I try to plot my drawing, my drawing only takes up 2/3 of the page on print preview. The top half of the page is blank. How can I make my drawing take up the whole available page?
View 9 Replies
View Related
Feb 15, 2013
how do I transfer model space drawing into paper space ?
View 2 Replies
View Related
Oct 4, 2013
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies
View Related
Apr 30, 2012
I am having trouble scaling my drawing between model space and paper space. I have it drawn in model space at 1:1, and I set the viewport scale in paperspace to 1:15. However, it does not show up as 1:15. I have drawn a 50' line in model space. The viewport is 4" wide in paperspace, so you should be able to see the whole line in the viewport at a 1:15 scale, with some space on each side. However, it does not. I can only see a small fraction of the line.
View 8 Replies
View Related
Jan 25, 2011
how to get a drawing from model space onto the layout space. I know it's simple but I can't remember how!
View 9 Replies
View Related
Jun 21, 2011
Paper space was just introduced the last time I used AutoCAD professionally. I didn't become familiar with it and it seemed like an unfathomable concept then; at least from the way it was explained to me.
So I did some drawing for this guy all in paper space...that was what first opened up in AutoCAD. After five hours and getting ready to send the files, I realize that maybe I should a done it in model space. Is it really going to make that much of a difference? If he wanted me to redo it in model space .
View 9 Replies
View Related
Mar 22, 2012
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies
View Related
Dec 29, 2010
It seems to happen randomly and I can't tell what triggers it. Everytime I regen or autosave/save the status shows "displaying contours" and a load bar that takes way too long and slows me down...
View 9 Replies
View Related
May 21, 2012
I have a 16GB Raster that we use for Design/Proposal purposes. Is there anything I could do to potentially improve load time or is this something I'll just have to live with?
Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013
View 8 Replies
View Related
Jan 20, 2011
If I try to hatch, it takes minutes for the command to process. Any settings I need to check?
View 6 Replies
View Related
May 18, 2012
I've been generally having trouble with Civil 3D 2012 taking a long time to do tasks. One that takes quite a while is if I drag a Cogo Point Label. As stated it takes about 75 seconds. It will move to where I drag it immediately but then the program is unresponsive for a minute and 15 seconds.
In the past 4 days I've repaired C3D, tried 4 or 5 different versions of the display driver and did a windows update. A lot of commands, specifically Civil 3D commands, are very slow. Does this ring any bells?
Civil 3D 2012 with SP (Update) 1
NVIDIA Quadro FX 4600 768MB GDDR3 (Tune log reports 2530 MB)
Driver 8.17.0012.9670
View 9 Replies
View Related
Dec 9, 2013
I am getting assembly problem as shown in attached fig where curb return takes zero elevation . However the same assembly working fine on other intersection
View 6 Replies
View Related
Mar 15, 2013
We just installed 2013. I'm in a layout tab, a AutoCAD/C3D keeps kicking me out of model space into paper space.
View 3 Replies
View Related
Dec 19, 2012
When I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
View 7 Replies
View Related
Apr 16, 2012
I am trying to work on a previous file in my office, and when it opens on mycomputer, it does not display as it should.
In general, the purpose of the project is to reinstate the side slopes of a road abutting a river. Cut & fill sections have been generated on 20m station increments along the road corridor/surfaces in order to calulate cut and fill as well as to reference the design to flood levels.
When I open the file, all of these sections (and there are alot) have relocated themselves to various locations in model space, none of which are aligned with the viewports that are being used for printing.
Could it be software and/or hardware incompatibility with the computer they were originally created on? (I believe it was created with C3D 2010, or C3D 2011 - I am currently running 2012)
View 2 Replies
View Related
Jan 18, 2007
I am able to get the drawing extents in the database but just fine except that when I draw objects in paper space and the extents decrease the properties Pextmax and Pextmin do not change accordingly. When I make objects larger everything is fine, I capture the change just fine. Where else to look or if there is a method to update this properly?
Public Sub CheckMedia(ByVal Printers As Collection)
Try
Dim oEditor As Autodesk.AutoCAD.EditorInput.Editor = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Editor
Dim oDatabase As Autodesk.AutoCAD.DatabaseServices.Database = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.Database
[code].......
View 1 Replies
View Related
Apr 20, 2012
I have received a drawing that is only showing in the first layout tab on a contractor's template. The drawing is in a viewport of course. The drawing does not show in the model space.
1. Is it possible to send a drawing only in the Layout tab?
2. Is it possible for me to do something to view the drawing in model space and how is it done?
3. Could it simply be a compatibility issue between the contractor's.
View 2 Replies
View Related
Jun 27, 2012
I use parametric base-model which automatically generates drawing (look "Pic1"). I change parameters I need and new drawing is generated (scale stays the same). However, dimensions on new drawing are displayed in random way (look "Pic2"). Is there a way (iLogic, VBA or smth els) to fix/link dimensins so - that they could stay in an appropriate way (space between dimensions, space between dimension and edge, dimension is centered on line with arrows) when the model size is changed (in this example I have changed the base diameter from 830 to 1280)?
Function "Arrange dimension" does not solve the problem!
View 1 Replies
View Related
Oct 10, 2011
when im switching my drawing into paper space and then trying to print it my drawing is massive and only small part of it id in the peper space.
View 9 Replies
View Related
Nov 14, 2013
I have drawn a dwg drawing with few new layers and copy paste few layers from another dwg drawing. But I when I change from model space to paper space I cannot see anything. Drawing cane be seen on model space but in paper space it totally disappeared.
View 6 Replies
View Related
Jun 3, 2013
1.how to differentiate the one drawing in model space using mm and the other one using cm, other one is using m?
2. am confused to know how to configure the units setting, and if someone set mm or cm in modal space does the auto-CAD detect the respective unit setting? e.g. one is using mm and he/she offset 1 unit, say mm, and suddenly i want to change the one unit offset to be m or cm, how does it work?
3. if some one has drawn in m, and i want copy and paste in new MS but i want continuing using different units say mm how does it work?
View 3 Replies
View Related
Jun 5, 2013
I just recently started using AutoCAD again after using Inventor for several months, and I'm having a very difficult time with annotations. I'd like to annotate the proper way, and I believe that's from withing layout space. I have several small weld details that simply need to be laid out on this drawing. They're all drawn to 1:1 scale, and I'd like to use Viewports to scale them up or down as appropriate.
How to properly annotate dimensions, text, and weld details such that they will all appear of uniform size among all details, but will be associative with respect to the geometry of each detail? This is quite simple in Inventor simply because of how it's designed to work, but AutoCAD works very differently and I'm very unfamiliar with how to work with text styles and dimstyles and weld-symbol styles in this manner. I can't get my annotation styles to work right.
View 3 Replies
View Related
Feb 22, 2007
I have to add dimensions to an architectural drawing in model space
The file is drawn in decimal units (1unit=1meter)
Now I have been asked to ad dimensions in feet and inches to the drawing in order to make it usable to UK
I know that the solution is to use alternate units with Architectural units format, but how mach is the multiplier that I have to use?
I have no experience in British metric system.
So I left the multiplier 25.4 as AutoCAD prompt.
2.81 meters equals to 5'-11 1/4” ?
I’m using AutoCAD 2007
View 9 Replies
View Related
Oct 17, 2006
is there any point when you set up a new drawing in setting the drawing limits.
For example I am about to draw up a house plan at scale 1:100 which will be plotted on an A3 sheet. I envisage the floor plans will be on one A3 and the Elevations will be on another A3 sheet. Sections will go on another A3. I will have approx 6 paper sheets set up for this.
I plan to draw the whole lot in model space. Then move it around in paper space so each item is on a seperate sheet.
Is this the correct way to do it. If it is, then what is the point of having drawing limits in Model space? The books I have, say it is good drafting practice to set up limits. But I can't see why Also what is the point of setting up the grid display when half the time you draw right off the grid?
View 9 Replies
View Related
May 1, 2011
My drawings appear small in paper space than they do in model space. How do i get them to fill the paper space?
View 9 Replies
View Related
Feb 15, 2012
I'm having a problem with Zoom Extent on a poticular drawing. when zooming normally with the scroll wheel it will work with no problems at all.
When I do a Zoom Extents everything in the Model window disapears even the viewcube and small tool bar and minimize and close buttons. but if i go to where the minimzie and close is and click my mouse picks up the command.
If i do a undo i get everything back.
Before Zoom Extents
before ZE.jpg
After Zoom Extents
blank window.jpg
Would this be a system varible or a driver issue. it only seems to do it with this drawing and when this drawing is Xref'ed into another drawing.
I have purged, audit and checked scales. but i'm still getting this problem.
View 9 Replies
View Related
Oct 4, 2011
I've got a persisitant problem with the publishing feature in autocad. I know how to set up bulk print of drawings using publish.
However the drawings are a mixed lot (some in paper some in layout). Is there a way to determine the state of the drawing without opening each one. In my case there is thousands of drawings and of course i do not have the manpower to inspect each one.
View 5 Replies
View Related
Jul 7, 2013
I have started to use Selection Set Manager for drawing previewing and publishing. I was moving drawings that are one to one to paper space to allow SSM usage but I recently found that my client does not want me moving drawings to paper space. He wants to keep his drawings in model space for one to one drawings (electrical schematics, one lines etc).
How can I use SSM for these model space drawings?
View 1 Replies
View Related
Jul 22, 2011
I'm trying to get a drawing flipped round in model space so it fits more neatly in a viewport. I need to rotate the model space by about 45 degrees so that a line that looked about 45 degree slope up from left to right becomes a flat line.
I've been trying to use 'ucs' in the command line and then type the degree rotation as this is what it says in the help section but it doesnt do what i want. It asks for an origin point on the x-axis and then i dont know what this means.
View 9 Replies
View Related
