I have a 16GB Raster that we use for Design/Proposal purposes. Is there anything I could do to potentially improve load time or is this something I'll just have to live with?
Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013
If I try to hatch, it takes minutes for the command to process. Any settings I need to check?
View 6 Replies View RelatedWhen i want to print a photoshop document it takes a long time for the dialogs box to show up and from there on every click takes five minutes for photoshop to react. It might hasve something to do with a print pofile I installed for a dye printer but I have deleted tha printer and stil have the problem. May-by som way to reset the printer prifiles but I have no clue on how to do this.
View 2 Replies View RelatedRonj2 - 4 hours ago
X4 works fine for me on my 2yr old Vista 64bit quad machine with 8gigs except that it takes almost 5 minutes to boot up so I can use it.
The application boots up to the edit screen than I just get the busy signal for the next 4-5 minutes. Task manager shows it is not responding. Works fine after that.
I also have X2 and it works just fine. If I make any changes to the uncataloged folders or file format exclusions under preferences in X4 it does the same thing (5 minites wait) untill the changes have taken affect. With that in mind I believe its a cataloging issue. Once its up and running its no problem. This is a trial if that makes any difference.I have tried the reset while booting it up ( hold down the crtl & alt keys) and that causes the program to crash after I select okay from the reset menu. The program is reset though after reloading it.
I don't use a graphic card and can not get GL 3.0 support or higher if that maked any difference like it does with Corel DVD movie factory which won't work on my computer.
Today I have a lucky day by finding the reason why X4 saving project costs minutes each time I do. I bought special to be as fast as possible a Medion Pentium 5 SSD harddrive computer and installed the Videostudio software all on the SSD drive to get as much speed as possible for editing, rendering, etc....But last few month it did take minutes to save a project each time I did and could not find the reason why. I did change directories and locations on the harddrives and lots of other things to get it good to work, but now I have found the reason, it is the smartsound track what makes the problem. Without smartsound music everything works ok with saving projects in seconds.
Other Thing what makes problems is the 15 minutes limit for youtube in videostudio. I have more than 90 movies now at youtube, but have to upload them outside videostudio because their lengt of more than 15 minutes.Some movies are more than one houre and at youtube goes everything well without any problems.
Installed Elements 10 on Win 7 64 bit laptop that is plenty powerful.Created a shortcut to launch Elements directly from the directory it installed in. It can take several minutes to open, if it does. Have tried Run as Admin, no difference. Sometimes nothing happens and I have to try several times to get it open. Once open I went to Preferences and turned off all Media Analysis, and all Third Party things and anything else that might be slowing it. Only imported about 50 files into the album, and it still takes so long to open I can't tell it is even trying.
View 7 Replies View RelatedAlso with LR4.1 the problem with avis (Canon Powershot Ixus 95IS) is not yet solved onm my system (AMD 6 Core, Win7 64Bit, 8GB RAM, ATI HD 5770 graphics card).
AVIs don't play when I want to start them in my LR3 converted catalog. Importing avis in a new catalog doesn't work at all. But the worst thing is, if you try to import pictures in a catalog already containing avis (or if there any avi is present in a folder you want to synchronize) it takes 10 minutes.The processes dynamiclinkmanager and dynamiclinkmediaserver are blocking the import for several minutes.
Is Kaspersky Anti-Virus interfering with Gimp start up??? ever since I installed Kaspersky Anti-Virus 2013, Gimp takes more than 20 minutes too start up, it searches for data files for more than 20 minutes straight before my image is opened in Gimp ever since Kaspersky was installed!
View 1 Replies View RelatedMy system:
- AMD 6 core CPU
- 8GB Ram
- Win 7 64bit
- AMD Radeon HD5770 graphic card.
LR4 takes 10 minutes or more to import 3 pictures. Importing these pictures in LR3 takes a few seconds.I did some checks: Using a new catalog (and not the converted one) and importing a sub folder of my picture directory has no effect. It takes also very long.
Importing a sub folder without videos is fast! But even if the videos are already imported (because of using the LR3 converted catalog), when adding new pictures to a subfolder it takes again 10 minutes. Importing videos in a fresh catalog does not work at all (they are only available if you convert the LR3 catalog) (Canon Powershot Ixus S95)
I have also a problem with playing (the LR3 catalog converted) videos. The video control bar does not react. After some minutes there is an error message that there was an error trying to work with the picture.
I am using windows 7 home edition and lightroom 4.1, and since the installation of the new version things slowed down.
View 1 Replies View RelatedI have New iMac and processing works fine. However, 90% of the time I get a "circling wheel" for 2 to 5 minutes when I save or rate a photograph.
View 4 Replies View RelatedWorking in 2013 Raster Design. The commands for raster tools are not working. When attempting to insert an image the following message appears:
c:program filesautodeskautocad raster design 2013aeciibui56.arx cannot find a dll or other file that it needs. Unknown command "IINSERT". Press F1 for help.
Similar messages appear when trying other commands located within the Raster Tools tab.
I'm using C3D 2013 on a 64 bit windows 7 machine. I have basejump loaded, and when I first installed it there would be a "Raster" tab in the ribbon that would allow me to resample, etc. That tab is now gone. How to get it back?
I used to click on a point to select it and a new tab would show up in the ribbon to list points, edit points, etc. That doesn't come up anymore either.
I am trying to increase the memory limit to my raster options and it wont let me change the size. I have plenty of available memory(mb) to use, but after i restart civil 3d and go back to the same options menu, its back to what it was..
View 3 Replies View RelatedI've just switched to autocad 2012, and when I'm opening dwg files it takes up to 2-3 minutes to open and save them. Autocad 2007 opens and saves the same files in mere seconds without problems.
View 9 Replies View RelatedApplication load timeout (20 minutes).I googled it and found here on The Area some1 also posted this a few years back, but didn't get a reply.
Yes I know you can set the timeout limit, but surely max shouldnt take 20 minutes to start up. And as I said, it was working fine one day, then next day suddenly this.Its on Max 2012 64bit with Backburner 2008.1.1..I'm running it as a service with my username
I have CS6 64bit on a reasonably up to date windows 7 system. Just checked for CS6 upgrades 7/14/13, and have the latest version (13.0.1.2).
Things have been working fine since I installed the product about a month ago.
At some point something went wrong and it now takes 30 seconds or more to load a file via "file>open..."
It also takes 30 or more second just for photomerge to display the file dialog from "file>automate>photomerge..."
All other photo s/w I have loads raw files, tifs, jpegs, etc... very quickly. This is CS6 specific.
I disabled loading of plugins, didn't work (CS6 starts quickly enough, just not so much file loading).
when I first start LR4, loading the Book, Slideshow, Map and to a lesser extent, Web modules take forever. Especially the Book module - it takes a good 25-30 seconds to load. Once it's loaded it's fine. I've been told everything from "that's normal" to there's something wrong with my computer.
Laptop Spec's - Spring 2010 15" MBP 2.4 i5 with 8gigs of RAM, 256mb video RAM, 500gig 7500rpm HD.
Other's have reported similar delays (none reaching 25-30 seconds though), where as others don't have any issues at all.
I start psp and the TAB on the left hand side (which shows my collections) flickers as if it is continuously trying to load. After about 2 mins it stops and I can continue as normal
why it takes so long to load this information?
each time I force quit Smoke with the service monitor in a project when I open the same project after it takes several time to load the clips (EDITDESK: LOADING CLIPS). Sometimes the project just didn't open and stay on the EDITDESK: LOADING CLIPS screen.
There's something I'm doing wrong or my project is totally corrupt ?
smoke201321_smack02_app.txt smoke201321_smack02_shell.txt
As with every ACAD update, how to do the same task differently and discovering the useful functions that have been removed. With 2014 comes Live Maps which apparently killed Base Jump. But here's the problem, when running just basic ACAD, I can load the background image using Live Maps, but with the same drawing opened in C3D, no image. Using the GEOGRAPHICLOCATION command causes, well, nothing to happen either. Background image to load in C3D? Not being able to plot the image will be the next fun hurdle that will only cause more frustration I am sure.
View 5 Replies View RelatedI am trying to find out a good way to calculate hours minutes seconds , know a good program I can use on my phone. I am trying to add
35:42:16+17:53:57
I want to set my autosave (In Options) at 30 minutes but it seems that my Civil 3d 2012 sets itself back at 10 minutes.
I even try to set it in the dialog box with SAVETIME command at 30 minutes but it gives me the a prompt telling that its been setted at 10 minutes.
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
when trying to input the bearing in degrees minutes and seconds I have to input (for example) 89%%d49'38". how do i change it so i can input ddmmss?
View 5 Replies View RelatedI have a .dwg that displays a tumbnail of a corridor that I created. The file is large, 123MB, however when it is opened the vast majority of the drawing does not exist. As in with all layers turned on nothing appears, the surfaces do not show up in the prospector, nor does the corridor or any assemblies. The drawing is far too large for what is in it, there is one surface and minimal layouts. Additionally the mouseover previews for the layout tabs display correctly what should be there, however when the layout tabs are actually selected, they are blank. Restoring from backup does nothing. Attempting to purge etc. does nothing. Attempting to insert the entire drawing into a blank drawing causes autocad to crash with a memory read exception. (That tried on multiple machines with identical results.) I'd say that everything got deleted, but the file size indicates otherwise. cntrl-A finds nothign other than what I can see and select normally.
View 9 Replies View RelatedI have a file that looks like it is going to open nice and fast and then it gets stuck at 50% synchronizing references. It literally takes over 5 minutes for the file to come completely up and ready to work on.
In the file I have an existing ground surface data reference and two corridors (with alignments, profiles and profiles views) that are basic access roads roughly 1200' long each with a very basic assembly. I also have a pipe network data referenced that is just a bunch of pipes that represent existing utilities crossing the access road so I can show them in cross sections. The final thing I have in here are 50' cross sections for each of these access roads.
why does it take me 5+ minutes to get into this file?
I'm using civil 3d 2008 and trying to lable my pavement radius with Line and Curve Label but the delta setting is only in decimal, how do i get it to read degrees, minutes and seconds.
View 4 Replies View RelatedIt seems to happen randomly and I can't tell what triggers it. Everytime I regen or autosave/save the status shows "displaying contours" and a load bar that takes way too long and slows me down...
View 9 Replies View RelatedI've been generally having trouble with Civil 3D 2012 taking a long time to do tasks. One that takes quite a while is if I drag a Cogo Point Label. As stated it takes about 75 seconds. It will move to where I drag it immediately but then the program is unresponsive for a minute and 15 seconds.
In the past 4 days I've repaired C3D, tried 4 or 5 different versions of the display driver and did a windows update. A lot of commands, specifically Civil 3D commands, are very slow. Does this ring any bells?
Civil 3D 2012 with SP (Update) 1
NVIDIA Quadro FX 4600 768MB GDDR3 (Tune log reports 2530 MB)
Driver 8.17.0012.9670
I am getting assembly problem as shown in attached fig where curb return takes zero elevation . However the same assembly working fine on other intersection
View 6 Replies View Relatedwell i have a problem on solving an autoCAD homework . i have a pdf with the contours of the altitude of an area and i have to rasterize it as an image in AutoCAD 2006 (i put it on windows paint , then i save it as an img (jpg) ) and then i inserted it in AutoCAD. I have to georeference that image and to fix its scale. How can i do that ?
View 1 Replies View Related
