I've just switched to autocad 2012, and when I'm opening dwg files it takes up to 2-3 minutes to open and save them. Autocad 2007 opens and saves the same files in mere seconds without problems.
View 9 RepliesThis happens to me on every few projects. I have this spline which is the blueprint I am using to model my scene. It was ok initially, and now after like 3 hours of work it takes like 15 seconds to select, and ages to do anything on it. And it's not one of those bad blueprints where architects double all the lines, many copies and intersections, it's a very clean and good blueprint. I tried merging it to a new scene but still the same. The scene so far has only 4 objects.
View 1 Replies View RelatedI have added live effects (mainly liquid color, edited many times, don't know if the latter matters) to a bitmap image that additionally is heavily cropped beforehand (inside Designer).
Now every time I change the size or angle of that bitmap, it takes like two minutes to render that change
Is there a way to discard the cropped parts of the image (or something), in order to speed up that re-rendering -- but without losing my many layers (or at least the final stage, but including editability of it) of the liquid color effect?
I have CS6 64bit on a reasonably up to date windows 7 system. Just checked for CS6 upgrades 7/14/13, and have the latest version (13.0.1.2).
Things have been working fine since I installed the product about a month ago.
At some point something went wrong and it now takes 30 seconds or more to load a file via "file>open..."
It also takes 30 or more second just for photomerge to display the file dialog from "file>automate>photomerge..."
All other photo s/w I have loads raw files, tifs, jpegs, etc... very quickly. This is CS6 specific.
I disabled loading of plugins, didn't work (CS6 starts quickly enough, just not so much file loading).
At home I have 3ds Max 2013 and at my class I am currently taking, they have 3ds Max 2012. When I tried to upload my 3ds Max 2013 file using 2012 I got; "File Load Failure (*file path*).
I now understand that I can save the file as a 2012 (from the 2013 version) but is there anyway to convert the file while at the class? I will not have access to my 2013 file for a while, and this file is homework..
I have a 16GB Raster that we use for Design/Proposal purposes. Is there anything I could do to potentially improve load time or is this something I'll just have to live with?
Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013
Can you save files for 2012 in 2013? I have the ability to upgrade to 2013 while others at my company are not able to, since they were not put on the subscription service. If I upgrade will they still be able to open my files or can I back save to a previous version? I know I can save it as different file type, like .iges or .step, then use feature recognition. But I need them to have full editability to sketches and features.
View 9 Replies View RelatedI've got a lot of scenes that have become exceedingly slow to save and load. Like often taking 10 to 20 minutes to save. With looming deadlines this is becoming really desperate! I've tried merging into a new scene, running scripts to clean out notetracks etc. Even after deleting every object and material, and resetting all render settings, the file is still inexplicably slow. See attached example.
View 5 Replies View Relatedwhen I first start LR4, loading the Book, Slideshow, Map and to a lesser extent, Web modules take forever. Especially the Book module - it takes a good 25-30 seconds to load. Once it's loaded it's fine. I've been told everything from "that's normal" to there's something wrong with my computer.
Laptop Spec's - Spring 2010 15" MBP 2.4 i5 with 8gigs of RAM, 256mb video RAM, 500gig 7500rpm HD.
Other's have reported similar delays (none reaching 25-30 seconds though), where as others don't have any issues at all.
Since we upgraded to Inventor 2012 SP1 on W7 x64 most machines cannot open or save out step or iges files. The translator shows as 'On demand' and when i save copy as the 'options' button is inactive. We just get the standard error 'Problems encountered while saving the document'.
I see lots of old posts but nothing relating specifically to stp files.
Inventor 2010
I start psp and the TAB on the left hand side (which shows my collections) flickers as if it is continuously trying to load. After about 2 mins it stops and I can continue as normal
why it takes so long to load this information?
I am running Inventor 2012 sp2.
Even with a simple IPT that only has a handfull of features, at times it takes a long time (3-5 minutes, sometimes longer) for Inventor to execute a undo or redo command.
Undo file size setting in Application options is set at 1MB (which is teh same setting I used in previous versions).
each time I force quit Smoke with the service monitor in a project when I open the same project after it takes several time to load the clips (EDITDESK: LOADING CLIPS). Sometimes the project just didn't open and stay on the EDITDESK: LOADING CLIPS screen.
There's something I'm doing wrong or my project is totally corrupt ?
smoke201321_smack02_app.txt smoke201321_smack02_shell.txt
I have down loaded the program (Maya 2012 Student Version ) but most of the time when I click on some icons, I got the message as follows: " The file being saved was created by a Student Version of Maya intended for personal learning only. If you save the file, this message will always appear whenever the file is opened.”since I am not saving the files, I am just clicking some icons, I don't know why I got this message. It makes me so inconvenient to use this program because I got this Pop up screen almost every 10 seconds though.
View 3 Replies View RelatedIs it normal for VSX4 to take a long time to save a project? I am finding that it is taking about 20 minutes for X4 to save my project each time, which has a running time of about 45 minutes. This is an excessive amount of time wasted in waiting for it to do its thing, as I can't proceed with anything else while it is saving.
View 13 Replies View RelatedI have an issue with saving files in my Illustrator CS6 (64bit), the saving process is too long, 5-10 minutes of wait and my laptop is getting iffy while saving. Sometimes Ai crashes in midst of my work or saving and I loose hours of work.
My laptop: CPU Intel i3, 8GB RAM, 1GB Nvidia Graphics, 480GB HDD, Windows 7 Premium 64bit.
I tried fixing the problem so far (unsuccesfully obviosly) by doing this:
1) Running all updates
2) Uninstalling excess fonts, I only have 180 fonts currently
3) I do not use FontExplorerProX or similar.
4) I turned off compression option during save.
5) I turned off making PDF copy option.
Same Ai on a much weaker PC in XP SP3 32bit has saving time of few seconds. This issue was nonexistant when I first installed Ai, but as time goes by its getting worse and worse, it seems.
When I have images placed in Illustrator, even just a few small ones, Save takes much longer..so long that it can be 20 seconds before I even see the progress bar, and after that the saving actually happens.
Is there a way around this, or are we stuck wtih mind-numbing save times when we have raster elements placed in Illustrator?
CS6, OS X 10.8.4
I was trying to figure out the best way of loading an external WPF executable assembly into Autocad. The scenario is simple though to explain.
The user enters a command in Autocad. The command invokes a WPF application, which loads a particular WPF Window. The command also need to pass a parameter to the WPF application when it requests the WPF Window to load. When the user is done with the Window, he closes it like any modal window that appear in Autocad. What are the possible ways to have such an interaction in AutoCAD using .Net and C# and WPF
I can't get iLogic to load on my laptop. If I select Tools - Add ins then iLogic shows as load automatically but currently unloaded. If I check loaded, close the dialogue, open it again, then it has gone back to unloaded.
On my desktop, if I check unloaded then iLogic goes away, but if I select loaded it comes back. Similarly, I can turn on/off any of the add-ins such as the Design Accelerator, BIM Exchange, etc at will.
On my laptop, I can load/unload anything except iLogic, which won't load.
Both machines are Dells, running NVIDIA graphics under XP x64. Inventor Pro Product Design Suite was installed on both machines at about the same time from the same installation files. The only difference is that my laptop has Service Pack 1 installed, the desktop machine doesn't.
My work helpdesk has recently installed AutoCad 2012 and my co worker and I noticed that at the start up its loads very slowly and often when we double click on a DWG to open (without Autocad being already open) it crashes.
View 2 Replies View RelatedI have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies View Relatedusing ACAD LT 2012. If he opens a DWG file from a Sharepoint site, makes some changes to the drawing and then SAVES the file, his changes are NOT saved and there is no indication that they were not saved. Needless to say this is critical.
View 6 Replies View RelatedOn starting autocad, before anything else appears an error box pops up saying "Unable to load Profile file, some profile information saved in the last session may not be restored". Click to accept the message and autocad starts normally with the exception that the ribbon doesn't show -at all. The user then switches to the classic workspace and back again and the ribbon will appear as expected.
The user, I believe, has local admin rights. I've tried uninstalling and reinstalling to no avail. My next step, is a last resort, which will involve uninstalling, then using some kinda registry cleaner to erase any trace of autocad on the laptop, then reinstalling - this is a bit severe, and will require the co-operation of my own IT dept, which can be like pulling teeth. I'm wondering if there's any other, less time consuming solution to this irritating problem?
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
How to load the content library for 2012?
View 2 Replies View RelatedWorking with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros buttonand it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too.It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
What the inventor addin load sequence is. I want first load addin and then load another addin what i create it.
View 1 Replies View RelatedWorking with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros button and it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too. It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads and it is very frustrating. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
Got this Problem since 16.0 to 16.0.1 update. I´m working on a MacPro with OS X 10.6.8.
View 3 Replies View RelatedSaving InDesign files to a network location seems to take an extremely long time during which I am unable to do anything else inside InDesign.I know that this has been an issue for me for at least 2 weeks (since March 3, 2014, possibly earlier). I am not certain whether I have updated InDesign since then, but have consistently been experiencing this same problem.
Today I ran some tests (all using the same ~20MB file).
Save from InDesign to network location: 12 seconds
Save from InDesign to desktop: <2 seconds
Copy file (in Windows Explorer) from desktop to network: <2 seconds
Copy file from network to desktop: <2 seconds
I know I can work on the file locally and copy my saved versions out at the end of the day, but this was not necessary before, and I don't know what changed to make this take so much longer than it used to.
Current system configuration: InDesign 9.2 x64 running on a Win 7 Pro 64-bit with 16GB RAM and a Xeon 3.6GHz processor.
I'm a school teacher in the PLTW program that uses Inventor extensively in my classroom. Our district operates under a 125 seat license. The issue I've run into is on my personal computer (Windows Vista, x64) and is therefore outside the realm of the usual IT guy's duties. The Inventor software was installed on my laptop by the PLTW training staff during my summer session. I *think* it is a stand alone install of the program.
What happens is after I launch Autodesk Inventor, I can see the splash screen, and the inventor.exe task appears in the task manager, however after a few seconds, the splash screen disappears and the program does not launch. There is no error message.
This is confusing since until quite recently I am sure that Inventor was working hunky dory. Also, all the other Autodesk programs seems to function normally (Fusion, Design and Review)
I've tried a repair and reinstall, but the problem still persists. Also, I updated the install with SP 1, but this had no effect either.
I have recently updated my display drivers (ATI Radeon), however, I tried reverting back to the older drivers and still the problem persists, so I don't think it is graphics driver related
2012 showcase starts to load and then shuts down.
View 3 Replies View Related