I start psp and the TAB on the left hand side (which shows my collections) flickers as if it is continuously trying to load. After about 2 mins it stops and I can continue as normal
why it takes so long to load this information?
I recently installed Corel paintshop pro x4 in my computer and when I go to open it, it takes a long time for it to open. My mouse keeps spinning. When I first installed it, everything worked fine. I added a couple of plug ins. Should I uninstall paintshop and re-install? If so, would I lose the plug-ins?
View 8 Replies View RelatedI have CS6 64bit on a reasonably up to date windows 7 system. Just checked for CS6 upgrades 7/14/13, and have the latest version (13.0.1.2).
Things have been working fine since I installed the product about a month ago.
At some point something went wrong and it now takes 30 seconds or more to load a file via "file>open..."
It also takes 30 or more second just for photomerge to display the file dialog from "file>automate>photomerge..."
All other photo s/w I have loads raw files, tifs, jpegs, etc... very quickly. This is CS6 specific.
I disabled loading of plugins, didn't work (CS6 starts quickly enough, just not so much file loading).
Ronj2 - 4 hours ago
X4 works fine for me on my 2yr old Vista 64bit quad machine with 8gigs except that it takes almost 5 minutes to boot up so I can use it.
The application boots up to the edit screen than I just get the busy signal for the next 4-5 minutes. Task manager shows it is not responding. Works fine after that.
I also have X2 and it works just fine. If I make any changes to the uncataloged folders or file format exclusions under preferences in X4 it does the same thing (5 minites wait) untill the changes have taken affect. With that in mind I believe its a cataloging issue. Once its up and running its no problem. This is a trial if that makes any difference.I have tried the reset while booting it up ( hold down the crtl & alt keys) and that causes the program to crash after I select okay from the reset menu. The program is reset though after reloading it.
I don't use a graphic card and can not get GL 3.0 support or higher if that maked any difference like it does with Corel DVD movie factory which won't work on my computer.
I am running Win 7 64bit Pro with several users defined on a PC. PSP X4 runs OK for my user, but all other users cannot start PSP X4 they get a message Temp Directory not defined. The Temp Directory is defined and valid with write permissions.
Windows is installed on C: drive, but User directories are on E: Drive
PSP X4 version 14.3.0.3
I have reviewed a post for a similar issue, but this does not apply for my issue viewtopic.php?f=56&t=39832&p=208741&hilit=temp+directory+not+defined
I have even tried copying the corel hive of HKCUSoftwareCorel from my user and "DocumentsCorel Paintshop Pro" directory to the other user, but still get the temp directory is not defined message
So basically although PSP X4 is running for one user on the PC, none of the other users can start it to run for the first time
PSP taking eons to save a file. It goes into (Not Responding) mode. It is using about 10 to 15% CPU for a good 4 to 6 minutes before it all comes alive again likje nothing happened. THis is with small 50K pics and larger 600dpi images. All held locally. No disk whirring so it all seems to be a memory thing ! Vista Ultimate. Old machine but PSP has been running fine on this box for a while now (aside from startup times being slow). I've been editing larger files regularly with no issues before.
View 4 Replies View RelatedI purchased X5 Ultimate last spring and have been happy with the results. My only complaint is the extraordinarily long start up time. From clicking the icon to being able to use it takes about 2 minutes. The X5 outline or shell appears within 15-20 seconds and then there is a round blue circle spinning in the center of the work area for the remainder of the 2 minutes. Once initialization has completed X5 works very well for me.
I upgraded to X6 Ultimate and found it to be amazingly faster, which was my hope. 15-20 seconds and it is ready to use. This holds true for the 32 & 64 bit programs.
I would like to use X5 for the existing plugins that shipped with it. It is up to date with SP3.
Win 8 Pro 64 bit up to date.
16 GB ram
I noticed in Cassel's excellent Wishlist for X6 that she said:
Cassel wrote:since it is possible to have the text too long or otherwise extending outside the image, it is impossible to select the whole text to change the font or the size or the kerning.
My system:
- AMD 6 core CPU
- 8GB Ram
- Win 7 64bit
- AMD Radeon HD5770 graphic card.
LR4 takes 10 minutes or more to import 3 pictures. Importing these pictures in LR3 takes a few seconds.I did some checks: Using a new catalog (and not the converted one) and importing a sub folder of my picture directory has no effect. It takes also very long.
Importing a sub folder without videos is fast! But even if the videos are already imported (because of using the LR3 converted catalog), when adding new pictures to a subfolder it takes again 10 minutes. Importing videos in a fresh catalog does not work at all (they are only available if you convert the LR3 catalog) (Canon Powershot Ixus S95)
I have also a problem with playing (the LR3 catalog converted) videos. The video control bar does not react. After some minutes there is an error message that there was an error trying to work with the picture.
Windows 7, Photoshop CS6 13.0.1 x64. I updated from CS5 and all was well. Photoshop came up very fast when it was started. One day for a reason I've forgotten, I had to delete and reinstall CS6 and ever since then it's taken I'd estimate maybe 20 seconds to come up. If I shut CS6 down and restart it without rebooting the computer, it comes up relatively fast.
I'm assuming there is a file that should be starting on boot and apparently it got lost along the way. But I see nothing unusual in my startup file.
Is it normal for VSX4 to take a long time to save a project? I am finding that it is taking about 20 minutes for X4 to save my project each time, which has a running time of about 45 minutes. This is an excessive amount of time wasted in waiting for it to do its thing, as I can't proceed with anything else while it is saving.
View 13 Replies View Relatedi have got a problem with AutoCAD 2010 right now. Im having some procedures that take very long to process in between a Transaction Manager. Start Transaction and Commit/Abort.
When taking too long AutoCAD sometimes just disappears/crashes without giving a call stack/Exception or anything. There are also no memory leaks or exceptions raised, though i send some status messages to the command line of AutoCAD.
Does AutoCAD need anything like a KeepAlive? Do i have to send it some specific messages or anything? Is that a common problem?
I have an issue with saving files in my Illustrator CS6 (64bit), the saving process is too long, 5-10 minutes of wait and my laptop is getting iffy while saving. Sometimes Ai crashes in midst of my work or saving and I loose hours of work.
My laptop: CPU Intel i3, 8GB RAM, 1GB Nvidia Graphics, 480GB HDD, Windows 7 Premium 64bit.
I tried fixing the problem so far (unsuccesfully obviosly) by doing this:
1) Running all updates
2) Uninstalling excess fonts, I only have 180 fonts currently
3) I do not use FontExplorerProX or similar.
4) I turned off compression option during save.
5) I turned off making PDF copy option.
Same Ai on a much weaker PC in XP SP3 32bit has saving time of few seconds. This issue was nonexistant when I first installed Ai, but as time goes by its getting worse and worse, it seems.
I am having trouble opening up cdr files as they take very long time to open (around 20-25 min per file of 5-10 MB).
Following are my system specs:
>Intel Pentium 4 - 3GHz, 2 GB RAM,
>Windows XP SP2
>Coral Draw X3 installed
I have already tried deleting unnecessary fonts, views and color styles. I also restored corel to factory defaults (using F8 key at start up) but some cdr files still take a long time to open.
I have been running PSCS3 for quite a while. I just installed it into a new system. Just about every time I try to shut it down, it takes 5 minutes or more to shut. Often I need to use the task manager to close and it takes several attempts to close.
FWIW, Bridge CS3 can have the same problem.
I have 3 GB RAM. 3.00 gigahertz AMD Athlon 64 X2 Dual Core.
Have open a old max scene. And it take a very long time to save. That can have multiple reasons. Found a new (for me):
My old scene has a "render output" path to a no longer exists netzwork drive. This slow down max on save. Don't know why max access the output path on save ;( Slow down is also the Assert Tracking dialogue and "Render Output/Files..." Dialogue... Maybe max always tries to access the not existing network drive, every time ;(
When I give the open command, it takes 3 to 5 minuites just to get the file selection dialog box. I am running Windows 7.
View 8 Replies View RelatedSo I just recently purchased Lightroom 5.3 and installed it on a brand new clean install of Windows 7. When I attempt to import RAW files into LR from a secondary hard drive, Lightroom just stalls out for five to ten minutes. Eventually, if I wait long enough, the Import dialogue screen loads and I get to wait another five to ten minutes to choose my secondary drive with my RAW files on it. When I can select that drive and click the directory with my files, I get to wait ANOTHER five to ten minutes for it to accept that choice and load my photos into the Import window. Once I get past all that and hit the Import button, it actually loads the files into LR just fine and I can work as normal. I have never had this issue with this specific drive when I had Lightroom 3 and 4, so I don't know why suddenly LR 5 would not like it.
OS - Windows 7 SP1 64 bit
LR Version - 5.3 64 Bit
Processor - Intel Core 2 Duo
RAM - 8 GB
Secondary Drive - 2 TB SATA internal
No USB periphrials engaged on computer
It seems to happen randomly and I can't tell what triggers it. Everytime I regen or autosave/save the status shows "displaying contours" and a load bar that takes way too long and slows me down...
View 9 Replies View Relatedwhy does it take ages to copy and paste from one drawing to another
View 3 Replies View RelatedGot this Problem since 16.0 to 16.0.1 update. I´m working on a MacPro with OS X 10.6.8.
View 3 Replies View RelatedSaving InDesign files to a network location seems to take an extremely long time during which I am unable to do anything else inside InDesign.I know that this has been an issue for me for at least 2 weeks (since March 3, 2014, possibly earlier). I am not certain whether I have updated InDesign since then, but have consistently been experiencing this same problem.
Today I ran some tests (all using the same ~20MB file).
Save from InDesign to network location: 12 seconds
Save from InDesign to desktop: <2 seconds
Copy file (in Windows Explorer) from desktop to network: <2 seconds
Copy file from network to desktop: <2 seconds
I know I can work on the file locally and copy my saved versions out at the end of the day, but this was not necessary before, and I don't know what changed to make this take so much longer than it used to.
Current system configuration: InDesign 9.2 x64 running on a Win 7 Pro 64-bit with 16GB RAM and a Xeon 3.6GHz processor.
I was using a trial version of paint shop pro x5 and still had 11 days left of my trial when it suddenly stopped working. When I click on the icon to start paint shop pro it starts up and then freezes every time when it is loading in the spot that says "initializing color swatches".
I haven't changed anything on my computer- it just suddenly stopped working. I uninstalled it and tried reinstalling it, I also tried restoring it.
I recently downloaded the trial version of VSP X5. And now, I have a new 12 MP camera as opposed to the 5 MP I had before. Anyway this new camera shoots in video mode at 1920, 1280 and 640. When I use 1920 or 1280 (HD), the file size of the videos are huge, so when I import them to VSP, they take a very long time to import. Is this normal when you want high res videos or is there something I can do to cut down on the file size. To test it out, I shot 20 second videos at all three resolutions. In 1920, the file size was almost a whole gig at only 20 seconds. It would be much larger than that for lets say a 20 minute movie. I'm guessing that would take all day to import.
Correction: Actually, It's taking long to "Create a Video File", not to import the video. Anyway, is it normal for the program to take so long to create a file? if it's a 15 or 20 minute video, it will probaly take at least a couple of hours to create at that resolution.
After I migrated to Windows 7, PSPX3 does not load the plug-ins anymore. It says: "No plug-ins loaded." Older versions of PSP can load the plugins from the same directory, but not PSPX3. I have tried resetting the cache, and have checked the file location. It's correct and it is notched, but nothing works. I have 6Gb of RAM so it should do. Of course, I could always run the scripts in PSP8, so it's no big deal. But it should work.
View 1 Replies View RelatedI've just installed PSPx6, downloaded and installed updates. I'm using the 64 bit version and it will not load any plug-ins. I've set the file locations etc.
I've been using PSP since version 7, so I'm pretty capable. This is really making me angry though. It's a useless program to me if it won't utilize my Dreamsuite, KPT, Filters Unlimited, Plaid lite, and Muras copies.
I have a *.png picture with a file size of 5.8 MB a height of 39920 pixels and a width of 1020pixels.
When I try to drag& drop this picture from WinExplorer onto a X2 PSP installation then PSP tells me: "This is not a valid PNG file"
This *.png picture can be displayed without problems with other viewers. So its a problem of PSP.
How can I let PSP load successfully this picture?
I have a memory of 4Gb and running WIn7 pro 64bit. So hardware shouldn't be a problem too.
Is it somehow possible to load .exr (OpenEXR) files with PSP X4? This format seems not to be natively supported, the Photoshop plugin does not seem to work
View 2 Replies View RelatedI have an issue with PSP x5 on my Win-XP pc. When I exit the program, it won't load in again. if I open the Task manager. I can see that PSP is still loaded in memory. I can manually unload it and it will start properly the next time. I can use it on my Win-7 pc without the problem.
View 1 Replies View RelatedI am running Inventor 2012 sp2.
Even with a simple IPT that only has a handfull of features, at times it takes a long time (3-5 minutes, sometimes longer) for Inventor to execute a undo or redo command.
Undo file size setting in Application options is set at 1MB (which is teh same setting I used in previous versions).
I have an issue with PSP X4; on load the program creates folders in the root of my network drive ( M: ) including:
[list=]
[*]Brushes
[*]Bump maps
[*]CMYK profiles
[*]Deformation maps
[*Displacement maps
[*]and so on...
[/list]
I have deleted these folders manually and they are recreated each time PSP launches. I have changed the settings in File -> Preferences -> File Locations to remove references to these folder locations, and then tried deleting them, but they are recreated again on load. how to remove them? They are littering my network drive...