Lightroom :: 5.3 64 Bit - Import Takes Long Time Loading
Jan 16, 2014
So I just recently purchased Lightroom 5.3 and installed it on a brand new clean install of Windows 7. When I attempt to import RAW files into LR from a secondary hard drive, Lightroom just stalls out for five to ten minutes. Eventually, if I wait long enough, the Import dialogue screen loads and I get to wait another five to ten minutes to choose my secondary drive with my RAW files on it. When I can select that drive and click the directory with my files, I get to wait ANOTHER five to ten minutes for it to accept that choice and load my photos into the Import window. Once I get past all that and hit the Import button, it actually loads the files into LR just fine and I can work as normal. I have never had this issue with this specific drive when I had Lightroom 3 and 4, so I don't know why suddenly LR 5 would not like it.
OS - Windows 7 SP1 64 bit
LR Version - 5.3 64 Bit
Processor - Intel Core 2 Duo
RAM - 8 GB
Secondary Drive - 2 TB SATA internal
No USB periphrials engaged on computer
View 5 Replies
ADVERTISEMENT
Jan 16, 2013
I recently downloaded the trial version of VSP X5. And now, I have a new 12 MP camera as opposed to the 5 MP I had before. Anyway this new camera shoots in video mode at 1920, 1280 and 640. When I use 1920 or 1280 (HD), the file size of the videos are huge, so when I import them to VSP, they take a very long time to import. Is this normal when you want high res videos or is there something I can do to cut down on the file size. To test it out, I shot 20 second videos at all three resolutions. In 1920, the file size was almost a whole gig at only 20 seconds. It would be much larger than that for lets say a 20 minute movie. I'm guessing that would take all day to import.
Correction: Actually, It's taking long to "Create a Video File", not to import the video. Anyway, is it normal for the program to take so long to create a file? if it's a 15 or 20 minute video, it will probaly take at least a couple of hours to create at that resolution.
View 12 Replies
View Related
Dec 19, 2012
Windows 7, Photoshop CS6 13.0.1 x64. I updated from CS5 and all was well. Photoshop came up very fast when it was started. One day for a reason I've forgotten, I had to delete and reinstall CS6 and ever since then it's taken I'd estimate maybe 20 seconds to come up. If I shut CS6 down and restart it without rebooting the computer, it comes up relatively fast.
I'm assuming there is a file that should be starting on boot and apparently it got lost along the way. But I see nothing unusual in my startup file.
View 24 Replies
View Related
Mar 14, 2011
Is it normal for VSX4 to take a long time to save a project? I am finding that it is taking about 20 minutes for X4 to save my project each time, which has a running time of about 45 minutes. This is an excessive amount of time wasted in waiting for it to do its thing, as I can't proceed with anything else while it is saving.
View 13 Replies
View Related
Jul 14, 2013
I have CS6 64bit on a reasonably up to date windows 7 system. Just checked for CS6 upgrades 7/14/13, and have the latest version (13.0.1.2).
Things have been working fine since I installed the product about a month ago.
At some point something went wrong and it now takes 30 seconds or more to load a file via "file>open..."
It also takes 30 or more second just for photomerge to display the file dialog from "file>automate>photomerge..."
All other photo s/w I have loads raw files, tifs, jpegs, etc... very quickly. This is CS6 specific.
I disabled loading of plugins, didn't work (CS6 starts quickly enough, just not so much file loading).
View 3 Replies
View Related
Mar 4, 2012
I recently installed Corel paintshop pro x4 in my computer and when I go to open it, it takes a long time for it to open. My mouse keeps spinning. When I first installed it, everything worked fine. I added a couple of plug ins. Should I uninstall paintshop and re-install? If so, would I lose the plug-ins?
View 8 Replies
View Related
May 11, 2010
I am having trouble opening up cdr files as they take very long time to open (around 20-25 min per file of 5-10 MB).
Following are my system specs:
>Intel Pentium 4 - 3GHz, 2 GB RAM,
>Windows XP SP2
>Coral Draw X3 installed
I have already tried deleting unnecessary fonts, views and color styles. I also restored corel to factory defaults (using F8 key at start up) but some cdr files still take a long time to open.
View 7 Replies
View Related
Jun 7, 2008
I have been running PSCS3 for quite a while. I just installed it into a new system. Just about every time I try to shut it down, it takes 5 minutes or more to shut. Often I need to use the task manager to close and it takes several attempts to close.
FWIW, Bridge CS3 can have the same problem.
I have 3 GB RAM. 3.00 gigahertz AMD Athlon 64 X2 Dual Core.
View 2 Replies
View Related
Jul 25, 2013
Have open a old max scene. And it take a very long time to save. That can have multiple reasons. Found a new (for me):
My old scene has a "render output" path to a no longer exists netzwork drive. This slow down max on save. Don't know why max access the output path on save ;( Slow down is also the Assert Tracking dialogue and "Render Output/Files..." Dialogue... Maybe max always tries to access the not existing network drive, every time ;(
View 1 Replies
View Related
Dec 29, 2010
It seems to happen randomly and I can't tell what triggers it. Everytime I regen or autosave/save the status shows "displaying contours" and a load bar that takes way too long and slows me down...
View 9 Replies
View Related
Feb 28, 2012
why does it take ages to copy and paste from one drawing to another
View 3 Replies
View Related
Sep 11, 2012
Got this Problem since 16.0 to 16.0.1 update. I´m working on a MacPro with OS X 10.6.8.
View 3 Replies
View Related
Mar 17, 2014
Saving InDesign files to a network location seems to take an extremely long time during which I am unable to do anything else inside InDesign.I know that this has been an issue for me for at least 2 weeks (since March 3, 2014, possibly earlier). I am not certain whether I have updated InDesign since then, but have consistently been experiencing this same problem.
Today I ran some tests (all using the same ~20MB file).
Save from InDesign to network location: 12 seconds
Save from InDesign to desktop: <2 seconds
Copy file (in Windows Explorer) from desktop to network: <2 seconds
Copy file from network to desktop: <2 seconds
I know I can work on the file locally and copy my saved versions out at the end of the day, but this was not necessary before, and I don't know what changed to make this take so much longer than it used to.
Current system configuration: InDesign 9.2 x64 running on a Win 7 Pro 64-bit with 16GB RAM and a Xeon 3.6GHz processor.
View 2 Replies
View Related
Jan 15, 2013
I am running Inventor 2012 sp2.
Even with a simple IPT that only has a handfull of features, at times it takes a long time (3-5 minutes, sometimes longer) for Inventor to execute a undo or redo command.
Undo file size setting in Application options is set at 1MB (which is teh same setting I used in previous versions).
View 9 Replies
View Related
Jul 22, 2013
I've used AutoCAD 2013 on other machines and have no had this issue.
When pasting to the command line there is a huge delay from when I hit CTRL-V until the actual text is displayed in the command line. It takes roughly 4.5 seconds for the following to display after pasting: (command "-view" "D" "*"). The time it takes is roughly the same and does not depend on the size of the lisp that I'm pasting.
The command bar is docked to the bottom and there is no transparancy enabled.I have tried setting AUTOCOMPLETEDELAY to 0 and 10 with no change.I have completely disabled all Auto-Complete options and it still happens.
There is also a significant delay between Auto-Complete populating the list of suggestions and when I am able to use the arrow keys to move the selection box down to pick a command.
View 3 Replies
View Related
Oct 20, 2011
We have a data folder on the server mapped as network drive to the clients. The data folder contains all cad data stored from productstream professional.
Due to an over 10 year old environment the data folder contains a huge amount of cad files, library parts, iParts and so on.
Due to historical growth of the environment there are some missing parts (not available on the file system anymore), because they were deleted, are corrupt, and so on. At the root of the data folder there is located the typical cmpinv11.ipj inventor project file.
If you open an assembly either from productstream or via inventor (without productstream) directly from the data folder and the assembly has an unresolved child component because the file isn't there anymore it takes a very very long time until the dialog box for unresolved link comes up (waiting time several minutes 1...10min). Once reached this point one can skip and repair the assembly, of course.
But the question is, how to speed up the time for getting the unresolved link dialog?
The network connection itself is quite OK und the project file itself is also OK. The project file list of every user is pretty small (only cmpinv11.ipj and some standard ipj's).
We think inventor internally scans the whole project-file folders to ensure that the component is really missing but due to the huge environment this takes many minutes and is annoying.
Any bypass for that? Is it possible to apply a temporär setting before opening a potential inconsistent assembly? Or is there a setting like skip unresolved components by default or by a defined timeout?
Because it is Inventor 2010 (Productstream PRO 210) there is no File open Option Auto-Skip unresolved components (like in 2012) but even if it was I guess it wouldn't reduce the time to get the dialog either.
View 2 Replies
View Related
Aug 27, 2011
I have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies
View Related
May 18, 2012
The AttSync command does what it advertises fairly well. My problem is that I have thousands of small blocks in a single drawing. (My current drawing has 2100 block references with four attributes in each one.) I may change the attribute values in a few of them and need to re-sync the attribute locations. When I run AttSync it updates every single block insertion. One of two things are desired:
1)Flag each block insertion as having been sync'ed, reducing the number of objects requiring synchronization when AttSync is called again. Provide a way to force all to be sync'ed.
2)Allow a selection set in the AttSync command after selecting the block to sync.
Either or both of these would a great time-saver for those of us with large numbers of blocks with attributes.
View 1 Replies
View Related
Jun 21, 2012
As I flip through pics in the Library Module, the previews often take a while to load. Any way of speeding this process up? I've already tried changing the Catalog Settings, ensured the pixels meet my screen resolution, and chose low quality preview.
View 11 Replies
View Related
Jun 3, 2012
Is there a way to shift the capture time (in EXIT) of multiple files by a long time frame? When you select photos and go to Metadata - Edit Capture Time, you can shift the capture time in the increments of hours.. I need to shift the capture time of some photos by years.. Is this possible at all within LR?
View 3 Replies
View Related
Jul 24, 2012
i have got a problem with AutoCAD 2010 right now. Im having some procedures that take very long to process in between a Transaction Manager. Start Transaction and Commit/Abort.
When taking too long AutoCAD sometimes just disappears/crashes without giving a call stack/Exception or anything. There are also no memory leaks or exceptions raised, though i send some status messages to the command line of AutoCAD.
Does AutoCAD need anything like a KeepAlive? Do i have to send it some specific messages or anything? Is that a common problem?
View 6 Replies
View Related
Jul 13, 2013
I have an issue with saving files in my Illustrator CS6 (64bit), the saving process is too long, 5-10 minutes of wait and my laptop is getting iffy while saving. Sometimes Ai crashes in midst of my work or saving and I loose hours of work.
My laptop: CPU Intel i3, 8GB RAM, 1GB Nvidia Graphics, 480GB HDD, Windows 7 Premium 64bit.
I tried fixing the problem so far (unsuccesfully obviosly) by doing this:
1) Running all updates
2) Uninstalling excess fonts, I only have 180 fonts currently
3) I do not use FontExplorerProX or similar.
4) I turned off compression option during save.
5) I turned off making PDF copy option.
Same Ai on a much weaker PC in XP SP3 32bit has saving time of few seconds. This issue was nonexistant when I first installed Ai, but as time goes by its getting worse and worse, it seems.
View 7 Replies
View Related
Nov 8, 2011
When I give the open command, it takes 3 to 5 minuites just to get the file selection dialog box. I am running Windows 7.
View 8 Replies
View Related
Mar 30, 2012
Also with LR4.1 the problem with avis (Canon Powershot Ixus 95IS) is not yet solved onm my system (AMD 6 Core, Win7 64Bit, 8GB RAM, ATI HD 5770 graphics card).
AVIs don't play when I want to start them in my LR3 converted catalog. Importing avis in a new catalog doesn't work at all. But the worst thing is, if you try to import pictures in a catalog already containing avis (or if there any avi is present in a folder you want to synchronize) it takes 10 minutes.The processes dynamiclinkmanager and dynamiclinkmediaserver are blocking the import for several minutes.
View 2 Replies
View Related
Aug 9, 2011
I start psp and the TAB on the left hand side (which shows my collections) flickers as if it is continuously trying to load. After about 2 mins it stops and I can continue as normal
why it takes so long to load this information?
View 1 Replies
View Related
Sep 12, 2012
Just purchased my first mac, the imac. I have 550 gb photo files on my pc which apple has been transferring to the mac since last friday night. All kinds of problems have occurred and the final outcome is that they were unable to transfer about 200gbs of files. Could be that one or more files were corrupted.
I have ordered LR4 and plan on downloading it next week.
How long it would take to import anywhere from 300 to 550gbs of files into LR?
View 3 Replies
View Related
Jan 16, 2012
Ok some times when I go to run details it pops up that it can not load the component database AecDtlComponents (US).mdb file. I go to options and can not do anything there. So I have to close it all down and hope when I reload AA it works. 9 out of 10 times it does. But this is a pain to do when ever you need to add detail stuff. Oh also this happens on more then one computer in the office. running 2012 with sp and all updates on windows 7
View 8 Replies
View Related
Jun 22, 2012
very long image loading times when loading an image into CS6 from LR4.When I right click an image in LR4 and select edit-in CS6, CS6 immediately starts up, and loads. But after CS6 is fully up on my screen, I get a spinning ball first, then spinning white/grey circles, until my selected image appears within CS6.
I am operatinng with an iMac 27 2.8G with 8G of memory and using SL 10.6.8 I have about 300G of free space on my HDD.
View 2 Replies
View Related
Jun 13, 2013
I am finding that the thumbnails for images to be imported from CF and SD cards (Sandisk Ultra and Extreme both 30MB/s) are taking a long time to appear in the import panel in LR5 - and much slower than they did for LR4.
I also get a lot of blank thumbnails as I scroll up and down the panel - sometimes in the middle of the group and sometimes at the top or bottom. These then eventually appear if I hold still on a block of thumbnails.
The most images I have tried to import at once is 155, (Canon 5D III) and I would guess that any more than this would be very slow indeed.
View 14 Replies
View Related
Dec 11, 2012
Every time i give a plot, even if very small, it takes almost 1 minute to complete the job. & i cant give next plot till previous is finished.
View 4 Replies
View Related
Sep 6, 2013
I made a Photoshop® script (action) which works perfectly. (Open .PDF files in Photoshop®, to after save them as .JPG files into another folder)
The problem comes when I launch a batch process. It takes a while to the computer to open the large .PDF files, and when a file is opened, well it doesn't go through the whole script. In fact, Photoshop® already open the second file and so on. Then without running the rest of the script/action .
View 2 Replies
View Related
