Paint Shop Pro :: X4 Takes 5 Minutes To Boot Up

Sep 24, 2011

Ronj2 - 4 hours ago

X4 works fine for me on my 2yr old Vista 64bit quad machine with 8gigs except that it takes almost 5 minutes to boot up so I can use it.

The application boots up to the edit screen than I just get the busy signal for the next 4-5 minutes. Task manager shows it is not responding. Works fine after that.

I also have X2 and it works just fine. If I make any changes to the uncataloged folders or file format exclusions under preferences in X4 it does the same thing (5 minites wait) untill the changes have taken affect. With that in mind I believe its a cataloging issue. Once its up and running its no problem. This is a trial if that makes any difference.I have tried the reset while booting it up ( hold down the crtl & alt keys) and that causes the program to crash after I select okay from the reset menu. The program is reset though after reloading it.

I don't use a graphic card and can not get GL 3.0 support or higher if that maked any difference like it does with Corel DVD movie factory which won't work on my computer.

View 14 Replies


ADVERTISEMENT

Paint Shop Pro :: X5 Long Boot Time?

Sep 17, 2013

I purchased X5 Ultimate last spring and have been happy with the results. My only complaint is the extraordinarily long start up time. From clicking the icon to being able to use it takes about 2 minutes. The X5 outline or shell appears within 15-20 seconds and then there is a round blue circle spinning in the center of the work area for the remainder of the 2 minutes. Once initialization has completed X5 works very well for me.

I upgraded to X6 Ultimate and found it to be amazingly faster, which was my hope. 15-20 seconds and it is ready to use. This holds true for the 32 & 64 bit programs.

I would like to use X5 for the existing plugins that shipped with it. It is up to date with SP3.

Win 8 Pro 64 bit up to date.
16 GB ram

View 4 Replies View Related

Photoshop :: Odd PS:CS Startup :: 7 Minutes To Boot

May 14, 2004

Photoshop CS will take approximately 7 minutes to boot if I don't goto:

C:Program FilesAdobePhotoshop CSPlug-ins

And place a ~ in front of the Imports & Exports folder (a ~ in front of a folder name will prevent PS from loading that folder's contents on boot)

The only file in this folder is:

TWAIN_32.8BA

Also, I have to goto:

C:Program FilesAdobePhotoshop CSPlug-insAdobe Photoshop Only

And ~ out the Automate folder (and the Online folder inside it) or I'll get another extremely long timeout on booting)

Does anyone know how I can re-enable these things?

The "ONLINE" folder got me thinking. I'm using a hardware firewall and a software firewall. But even when I disable the software one, I still get the long boots.

View 9 Replies View Related

Paint Shop Pro :: Keeps Crashing Every 2 Minutes?

Jun 12, 2011

I am trying to make a flyer and every 2 minutes PSP keeps crashing. Is there a way to get a log from it so I can post it here? I am using text and when i click on the right hand side to double click (for that the text sticks), it crashes. EVERY SINGLE TIME.

View 2 Replies View Related

Paint Shop Pro :: X4 - Takes Long Time To Open?

Mar 4, 2012

I recently installed Corel paintshop pro x4 in my computer and when I go to open it, it takes a long time for it to open. My mouse keeps spinning. When I first installed it, everything worked fine. I added a couple of plug ins. Should I uninstall paintshop and re-install? If so, would I lose the plug-ins?

View 8 Replies View Related

Photoshop :: It Takes 15 Minutes To Print?

May 18, 2013

When i want to print a photoshop document it takes a long time for the dialogs box to show up and from there on every click takes five minutes for photoshop to react. It might hasve something to do with a print pofile I installed for a dye printer but I have deleted tha printer and stil have the problem. May-by som way to reset the printer prifiles but I have no clue on how to do this.

View 2 Replies View Related

Paint Shop Pro :: Automatically Save Copy Of Work In Progress Every X Minutes?

Feb 24, 2013

In older versions of PSP, auto-save would automatically save a copy of the work in progress every X minutes (depending on what was set by the user) and overwriting the previous version, including the original if not working on a copy of it.

In PSPX4, auto-preserve added the functionality of saving a copy of the original to avoid overwriting it, but it also has autosave setting.

Questions :

- what does the autosave do except save the image when changing from Edit to Manage to Adjust?

- does autosave automatically save a copy (even if overwriting) of the work in progress?

- if so, where do we set how frequently a save should be?

View 3 Replies View Related

Paint Shop Pro :: X3 Takes Too Long To Load Initial Directory?

Aug 9, 2011

I start psp and the TAB on the left hand side (which shows my collections) flickers as if it is continuously trying to load. After about 2 mins it stops and I can continue as normal

why it takes so long to load this information?

View 1 Replies View Related

VideoStudio :: Pro X4 / Saving Project Takes Minutes?

Mar 3, 2012

Today I have a lucky day by finding the reason why X4 saving project costs minutes each time I do. I bought special to be as fast as possible a Medion Pentium 5 SSD harddrive computer and installed the Videostudio software all on the SSD drive to get as much speed as possible for editing, rendering, etc....But last few month it did take minutes to save a project each time I did and could not find the reason why. I did change directories and locations on the harddrives and lots of other things to get it good to work, but now I have found the reason, it is the smartsound track what makes the problem. Without smartsound music everything works ok with saving projects in seconds.

Other Thing what makes problems is the 15 minutes limit for youtube in videostudio. I have more than 90 movies now at youtube, but have to upload them outside videostudio because their lengt of more than 15 minutes.Some movies are more than one houre and at youtube goes everything well without any problems.

View 1 Replies View Related

Photoshop Elements :: Takes Forever To Open / Several Minutes

Sep 25, 2013

Installed Elements 10 on Win 7 64 bit laptop that is plenty powerful.Created a shortcut to launch Elements directly from the directory it installed in.  It can take several minutes to open, if it does.  Have tried Run as Admin, no difference.  Sometimes nothing happens and I have to try several times to get it open.  Once open I went to Preferences and turned off all Media Analysis, and all Third Party things and anything else that might be slowing it.  Only imported about 50 files into the album, and it still takes so long to open I can't tell it is even trying.

View 7 Replies View Related

Lightroom :: 4.1 - Still Takes 10 Minutes To Import Pictures If AVI Involved

Mar 30, 2012

Also with LR4.1 the problem with avis (Canon Powershot Ixus 95IS) is not yet solved onm my system (AMD 6 Core, Win7 64Bit, 8GB RAM, ATI HD 5770 graphics card).
 
AVIs don't play when I want to start them in my LR3 converted catalog. Importing avis in a new catalog doesn't work at all. But the worst thing is, if you try to import pictures in a catalog already containing avis (or if there any avi is present in a folder you want to synchronize) it takes 10 minutes.The processes dynamiclinkmanager and dynamiclinkmediaserver are blocking the import for several minutes.

View 2 Replies View Related

AutoCAD Civil 3D :: Raster Image Takes 20 Minutes To Load?

May 21, 2012

I have a 16GB Raster that we use for Design/Proposal purposes. Is there anything I could do to potentially improve load time or is this something I'll just have to live with?

Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013

View 8 Replies View Related

AutoCAD Civil 3D :: Hatch Command Takes Minutes For Process

Jan 20, 2011

If I try to hatch, it takes minutes for the command to process.  Any settings I need to check?

View 6 Replies View Related

GIMP :: Takes More Than 20 Minutes To Start Up Since Installing Kaspersky 2013

Dec 10, 2013

Is Kaspersky Anti-Virus interfering with Gimp start up??? ever since I installed Kaspersky Anti-Virus 2013, Gimp takes more than 20 minutes too start up, it searches for data files for more than 20 minutes straight before my image is opened in Gimp ever since Kaspersky was installed!

View 1 Replies View Related

Lightroom :: Importing Of Pictures Takes 10 Minutes If Videos Are In Sub-directory?

Mar 11, 2012

My system:

- AMD 6 core CPU
- 8GB Ram
- Win 7 64bit
- AMD Radeon HD5770 graphic card.
 
LR4 takes 10 minutes or more to import 3 pictures. Importing these pictures in LR3 takes a few seconds.I did some checks: Using a new catalog (and not the converted one) and importing a sub folder of my picture directory has no effect. It takes also very long.

Importing a sub folder without videos is fast! But even if the videos are already imported (because of using the LR3 converted catalog), when adding new pictures to a subfolder it takes again 10 minutes. Importing videos in a fresh catalog does not work at all (they are only available if you convert the LR3 catalog) (Canon Powershot Ixus S95)
 
I have also a problem with playing (the LR3 catalog converted) videos. The video control bar does not react. After some minutes there is an error message that there was an error trying to work with the picture.

View 5 Replies View Related

Lightroom :: Exporting A SlideShow Of 140 Pictures Takes Upwards Of 15 Minutes?

Jun 3, 2012

I am using windows 7 home edition and lightroom 4.1, and since the installation of the new version things slowed down.

View 1 Replies View Related

Photoshop Elements :: New IMac - Processing Fine But Takes 2-5 Minutes To Save / Rate

Sep 3, 2013

I have New iMac and processing works fine. However, 90% of the time I get a "circling wheel" for 2 to 5 minutes when I save or rate a photograph.

View 4 Replies View Related

Paint Shop Pro :: Exporting Frames From Animation Shop

Dec 24, 2011

Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:

View 2 Replies View Related

Paint Shop Pro :: Will Animation Shop Run On Windows 7 Next To X4?

Oct 28, 2011

I installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.

View 7 Replies View Related

Corel PHOTO-PAINT X5 :: Print Layout Similar To That In Paint Shop Pro?

Sep 25, 2012

Is there a Print Layout in X5 similar to that in Paint Shop Pro? 

View 1 Replies View Related

Paint Shop Pro :: Paint Brush And Eraser Stopped Working

Apr 9, 2011

My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.

View 14 Replies View Related

Paint Shop Pro :: How To Create Paint Drips In Design

Aug 20, 2011

if is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?

View 2 Replies View Related

Paint Shop Pro :: Change Color Of Paint Brush In X3?

May 15, 2012

I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.

Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?

View 3 Replies View Related

Photoshop :: Preferences / CS6 Won't Boot Up

Sep 5, 2013

Photoshop CS6 won't boot up!

View 1 Replies View Related

Photoshop :: Lockups On Boot

Jul 11, 2004

I've found that, upon boot, Photoshop takes 7 minutes to load. During this time, it stops for a LONG time on "Finding Plugins" and "Building TWAIN Menu List...".

Through much trial and error, I have found that if you ~ out the beginning of a folder name, PS will not load the contents on boot.

So I renamed:

C:Program FilesAdobePhotoshop CSPlug-InsImport-Export
(which contains just TWAIN_32.8BA)

to

C:Program FilesAdobePhotoshop CSPlug-Ins~Import-Export

AND RENAMED

C:Program FilesAdobePhotoshop CSPlug-InsAdobe Photoshop OnlyAutomate

to

C:Program FilesAdobePhotoshop CSPlug-InsAdobe Photoshop Only~Automate

AND RENAMED

C:Program FilesAdobePhotoshop CSPlug-InsAdobe Photoshop Only~AutomateOnline Services

to

C:Program FilesAdobePhotoshop CSPlug-InsAdobe Photoshop Only~Automate~Online Services

With this done, PS Cold Boots in 12 seconds, and warm boots in about 6-7. (AMD XP 1800 1.5Ghz, 1024MB DDR, Windows XP Pro).

I noticed that if you goto START > RUN > 'SERVICES.MSC' That the WIA (Windows Imaging Acquisition) Service is not started. WIA sounds like something PS would need to capture my Twain Compliant Scanner (Microtek SlimScan C6 US. Well, I tried to start it, but it times out, so I don't know if that's my problem or not.

If I dont' ~ out any folder names, PS DOES LOAD (after 7 minutes), but when I goto FILE > IMPORT > Microtek SlimScan (32bit)..., it takes another 2 MINUTES to bring up the ScanWizard for import into PS. Once I scan, the image comes in fine. But this is just WAY TOO LONG. Something is holding it up.

Also, when I don't ~ out folder names, I get all the commands on FILE > AUTOMATE. But when I do ~ out folder names, only 3 show up there. I'm not running any firewalls (software ones), I am behind a router, and am on Comcast Cable. I have NO plugins or any other customizations installed aside from the default install.

View 1 Replies View Related

Photoshop :: Boot PS Several Times...

Feb 15, 2009

I have a small niglling issue with my copy of Photoshop CS3 on Vista Ultimate 64 bit and I never use to get.

For the past several months I have had to click the PS icon (usually in my quick launch) several times before photoshop will actually boot up. Sometimes I can get PS to boot up on the first click, sometimes 2 (usually) but other times I have to click it bout 6+ times before I see the PS splash screen and it starts?

However, PS is doing something on this non-booting clicks, cos my Task Manager shows I have several processes of PS running, but they all use significantly less memory than the actual opened PS. So for example, if I had to click 6 times, the one that is open may be using 71k, but all the other ones will be using 4k, I then manually stop those processes and PS works fine.

This isn't a major problem cos I can get PS to boot and function as it is suppose to, but it its somewhat annoying when I have to keep doing this process everytime I want to run PS.

My specs (incase its needed) are:

Windows Vista Ultimate Retail x64
Intel Q9550 @ 3.6GHz
4GB PC2-8500 Corsair Dominator Ram
1x 150GB WD Velociraptor 10,000RPM HDD
1x 1TB Samsung F1 HDD
ATi 4870x2 2GB Graphics Card

Also, incase it matters, I have a copy of Flash CS3 installed too, both PS and Flash are 100% legimate copies.

View 2 Replies View Related

Photoshop :: Worn Hiking Boot

Jan 25, 2005

Wondering if anyone has tips on how to make a hiking boot worn out with mud on it, and look as though you "hiked it out" I have all the tools Adobe CS suite, Macromedia MX suite, Corel Suite. Any ideas out there?

View 9 Replies View Related

Photoshop :: Random CS5 Slowness After Adding More RAM And SSD Boot?

Dec 17, 2012

I have just completed an update of a MacPro 3,1 by adding more RAM, going from 12-20GB of RAM, adding a 240GB SSD that is less than half full vs 7200rpm 1TB boot drive. I've also moved my LR and Bridge cache off the boot drive to a 60GB SSD eSata Raid 0 setup. I have increased my PS allocated RAM up to 71% of my total RAM or about 14GB, History state is set at 20 levels and cache levels @ 6 and cache blocks at 1024k. PS scratch is set to the internal SSD boot drive.
 
But PS CS5 is experiencing random slow downs and total stops where we can not do anything, including exiting the app. Mouse will work but we can not run actions or use tools then all of a sudden it just snaps out of it but it will still be slow. We can then quit PS and relaunch and for awhile it will be fine.

Is this possibly a RAM issue?

View 3 Replies View Related

Photoshop :: CS5 Not Opening From External Boot Disk?

Mar 23, 2013

Because OS 10.8.2 was the worst update in Apple history, for the first time ever I decided to  do the 10.8.3 update on an external boot disk before sacrificing my internal disk. I used Super Duper to make a bootable clone of my internal , booted from the external and then did the combo update.

The first app I tried was Photoshop CS 5.1. It tried to open but I got a window that said "could not inialize scratch disk because disk could not be found". After I clicked OK on that, another window said  "could not open because disk could not be found" .  I have never tried to open Photoshop any version from a bootable backup before and I don't know what this means. The scratch disk for Photoshop is set to be my internal drive Macintosh HD. 

Why would it not find it?  If I were booting from my internal and had set the scratch to the external it would find it. Why would the app be looking for itself on another disk?

After recloning my internal which is still 10.8.2, I have not yet booted from the external to see if the problem was somehow caused by 10.8.3, but I wouldn't be surprised if it was. People have reported the usual weird behavior of an upgrade already on forums, but not this paricular problem

View 13 Replies View Related

Photoshop :: Reactivate After Reinstalling OS X From Its Boot Partition?

Oct 12, 2012

I recently had to reinstall OS X 10.7.4 because 10.8 will not run on my Mac. After the reinstall, Photoshop cannot find any licenses and does not offer me any way to re-enter my registration key.How can I get it to recognize the key or remove it entirely for a reinstall?

View 1 Replies View Related

Photoshop :: Why Doesn't CS6 Boot Into Extended Mode

Aug 14, 2012

Ok got a new laptop, quad core and went to install the trial of Photoshop CS6 Extended and it will not boot into extended mode but rather the original Photoshop mode, and I know this by the splash screen with the circles and the fact there is no 3D menu. A friend did the same on his laptop (different hardware) and his booted into Photoshop CS6 Extended. We used the same Adobe Download Assistant to do our installs. My GPU is the ATI Radeon 6520G and it has support for both Open GL & Open CL. It appears in the Performance preferences with GPU checked and Open CL is selectable in advanced. Now my question is why can't I get into Extended Mode? Why can't we just force it to do so? I have seen this issue all over the place and it seems to be related mostly to ATI/AMD chipsets. I would like to try out the 3D options.
 
I even tried installing the latest ATI Radeon drivers which are beta 2.7, same issue.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved