Is Kaspersky Anti-Virus interfering with Gimp start up??? ever since I installed Kaspersky Anti-Virus 2013, Gimp takes more than 20 minutes too start up, it searches for data files for more than 20 minutes straight before my image is opened in Gimp ever since Kaspersky was installed!
View 1 RepliesWhen i want to print a photoshop document it takes a long time for the dialogs box to show up and from there on every click takes five minutes for photoshop to react. It might hasve something to do with a print pofile I installed for a dye printer but I have deleted tha printer and stil have the problem. May-by som way to reset the printer prifiles but I have no clue on how to do this.
View 2 Replies View RelatedRonj2 - 4 hours ago
X4 works fine for me on my 2yr old Vista 64bit quad machine with 8gigs except that it takes almost 5 minutes to boot up so I can use it.
The application boots up to the edit screen than I just get the busy signal for the next 4-5 minutes. Task manager shows it is not responding. Works fine after that.
I also have X2 and it works just fine. If I make any changes to the uncataloged folders or file format exclusions under preferences in X4 it does the same thing (5 minites wait) untill the changes have taken affect. With that in mind I believe its a cataloging issue. Once its up and running its no problem. This is a trial if that makes any difference.I have tried the reset while booting it up ( hold down the crtl & alt keys) and that causes the program to crash after I select okay from the reset menu. The program is reset though after reloading it.
I don't use a graphic card and can not get GL 3.0 support or higher if that maked any difference like it does with Corel DVD movie factory which won't work on my computer.
Today I have a lucky day by finding the reason why X4 saving project costs minutes each time I do. I bought special to be as fast as possible a Medion Pentium 5 SSD harddrive computer and installed the Videostudio software all on the SSD drive to get as much speed as possible for editing, rendering, etc....But last few month it did take minutes to save a project each time I did and could not find the reason why. I did change directories and locations on the harddrives and lots of other things to get it good to work, but now I have found the reason, it is the smartsound track what makes the problem. Without smartsound music everything works ok with saving projects in seconds.
Other Thing what makes problems is the 15 minutes limit for youtube in videostudio. I have more than 90 movies now at youtube, but have to upload them outside videostudio because their lengt of more than 15 minutes.Some movies are more than one houre and at youtube goes everything well without any problems.
Installed Elements 10 on Win 7 64 bit laptop that is plenty powerful.Created a shortcut to launch Elements directly from the directory it installed in. It can take several minutes to open, if it does. Have tried Run as Admin, no difference. Sometimes nothing happens and I have to try several times to get it open. Once open I went to Preferences and turned off all Media Analysis, and all Third Party things and anything else that might be slowing it. Only imported about 50 files into the album, and it still takes so long to open I can't tell it is even trying.
View 7 Replies View RelatedAlso with LR4.1 the problem with avis (Canon Powershot Ixus 95IS) is not yet solved onm my system (AMD 6 Core, Win7 64Bit, 8GB RAM, ATI HD 5770 graphics card).
AVIs don't play when I want to start them in my LR3 converted catalog. Importing avis in a new catalog doesn't work at all. But the worst thing is, if you try to import pictures in a catalog already containing avis (or if there any avi is present in a folder you want to synchronize) it takes 10 minutes.The processes dynamiclinkmanager and dynamiclinkmediaserver are blocking the import for several minutes.
I have a 16GB Raster that we use for Design/Proposal purposes. Is there anything I could do to potentially improve load time or is this something I'll just have to live with?
Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013
If I try to hatch, it takes minutes for the command to process. Any settings I need to check?
View 6 Replies View RelatedMy system:
- AMD 6 core CPU
- 8GB Ram
- Win 7 64bit
- AMD Radeon HD5770 graphic card.
LR4 takes 10 minutes or more to import 3 pictures. Importing these pictures in LR3 takes a few seconds.I did some checks: Using a new catalog (and not the converted one) and importing a sub folder of my picture directory has no effect. It takes also very long.
Importing a sub folder without videos is fast! But even if the videos are already imported (because of using the LR3 converted catalog), when adding new pictures to a subfolder it takes again 10 minutes. Importing videos in a fresh catalog does not work at all (they are only available if you convert the LR3 catalog) (Canon Powershot Ixus S95)
I have also a problem with playing (the LR3 catalog converted) videos. The video control bar does not react. After some minutes there is an error message that there was an error trying to work with the picture.
I am using windows 7 home edition and lightroom 4.1, and since the installation of the new version things slowed down.
View 1 Replies View RelatedI have New iMac and processing works fine. However, 90% of the time I get a "circling wheel" for 2 to 5 minutes when I save or rate a photograph.
View 4 Replies View RelatedWindows 7, Photoshop CS6 13.0.1 x64. I updated from CS5 and all was well. Photoshop came up very fast when it was started. One day for a reason I've forgotten, I had to delete and reinstall CS6 and ever since then it's taken I'd estimate maybe 20 seconds to come up. If I shut CS6 down and restart it without rebooting the computer, it comes up relatively fast.
I'm assuming there is a file that should be starting on boot and apparently it got lost along the way. But I see nothing unusual in my startup file.
After Installing Sp3 PSP X4 does not start. I only get Error message:
Error: Versions must match.
Master = 14.2.0.1
RC = 14.3.0.1
I tried to install it also on a Windows 7 computer with same result.What to do?
I got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
I'm having a constant problem with Autocad 2010LT crashing on startup. After clicking on the AutocadLT 2010 icon the program starts to run, I see the start-up screen, and then everything disappears without any notice or error message.
I have installed service Updates 1 and 2 as well as the "Startup Error and Text Editing Hotfix". Nothing that I have read on the forums seems to fix the problem. I'm running Windows 7 Professional (64-bit). I should also mention that I have been running this version of the software on this computer without any issues for over 1 year before encoutering this problem.
My Gimp is crashing EVERY 5 - 10 minutes and already crashed umpteen dozen times already today! ANYTHING and EVERYTHING is causing it to crash! from opening up an image, using tools, changing visibility of layers, It has CRASHED at least once for EVERY action I can perform in Gimp! and it ONLY lasts 5 - 10 minutes until a crash! it EVEN crashes when it is dormant!
View 2 Replies View RelatedI've installed GIMP 2.8 on Windows XP. It was working fine till yesterday. It is crashing within 3-5 minutes of opening an image and when working on the image.I get run time error.
View 3 Replies View RelatedCannot find a way to set up angular dimensions to show that first zero if the minutes or seconds value is less than ten.
Desired: <degrees>08'05"
Stuck with: <degrees>8'5"
When adding a foreground image to a "flaming" blue background, I find that the image I add takes on the blue colors of the background, rather than keeping its original colors.
The linework and highlights (indeed, most of the detail) remain - they just all turn blue, heh. Like it's trying to camouflage itself. How do I keep the foreground image from "masking" itself to the colors of the background?
Both background and foreground image layers are in .xcf format. Could this be the problem? Do I need to change one or both to something like .jpg or .gif?
At times when I am dimensioning a dwg in paperspace one of the dimensions will assume the viewport scale when the dwg does a regen. Its as if the DIMLFAC will be set to something other than 1but its only for one or two dimensions. I check the DIMLFAC var for thje dwg and its set properly to (1). Since I am dimensioning in paperspace i have the DIMASSOC set to (2).
As you can imagine this is a huge problem when I send the dwg out for fabrication. What is the problem and how can I stop this from happening on random dwgs to random dimensions?
I have recently upgraded to 2013 FDS and now when I try to import Acad files (sometimes up to 2000 solids) it takes virtually a full day to import one file. When I had 2011 I could import these files much faster.
View 1 Replies View RelatedI've used AutoCAD 2013 on other machines and have no had this issue.
When pasting to the command line there is a huge delay from when I hit CTRL-V until the actual text is displayed in the command line. It takes roughly 4.5 seconds for the following to display after pasting: (command "-view" "D" "*"). The time it takes is roughly the same and does not depend on the size of the lisp that I'm pasting.
The command bar is docked to the bottom and there is no transparancy enabled.I have tried setting AUTOCOMPLETEDELAY to 0 and 10 with no change.I have completely disabled all Auto-Complete options and it still happens.
There is also a significant delay between Auto-Complete populating the list of suggestions and when I am able to use the arrow keys to move the selection box down to pick a command.
Splash screen shows components loading, until it gets to LAYERS ("Preparing working environment.... LAYERS") and it just hangs.
I've tried doing a repair; uninstalling and re-installing. Nothing works.
The program was working fine for months and it just started doing this. No new hardware or software has been installed. Even did a system restore to a time when I know it was working, in case there was some Windows or driver update.
Python plugins are not installing. They don't show up. Script-Fu works fine though.
View 9 Replies View RelatedIm trying to install GIMP on my Mac (OSX Mountain Lion) via macports but Im getting an error while doing sudo port install gimp.
Code:
Can I install the newer version 2.8.0 and also save the old version 2.6?
View 1 Replies View RelatedWhere/How do I install brushes, patterns and so forth on a mac? Can't seem to find it with google...
View 1 Replies View RelatedI installed the 2013 version onto my windows 7 64bit and after the installation process I launch the program and it freezes and then says there is an error. I have unistalled and reinstalled twice now with no luck. I attached a screen shot of what is going on.
View 9 Replies View RelatedBoth workstations are Win7 64 bit, how to get the Materials & Appearance Browser to show up on the computer that it is missing from?
On one workstation I get the following menu
On the other workstation I get this
FATAL ERROR: Unhandled Access Violation Reading 0x0020 Exception at b0ba4c12h
Ive looked around the forums and cant seem to find a solution. I was running AutoCad on Windows 8 just fine before...
Just installed 2013. After the program ran through the start up, it is displaying the menus, but I cannot see anything where the grid windows are supposed to be. I can add objects, etc, but I cannot see what I'm adding. This is Windows 7, 32 bit with Max 32 bit installed.
View 3 Replies View Related