Splash screen shows components loading, until it gets to LAYERS ("Preparing working environment.... LAYERS") and it just hangs.
I've tried doing a repair; uninstalling and re-installing. Nothing works.
The program was working fine for months and it just started doing this. No new hardware or software has been installed. Even did a system restore to a time when I know it was working, in case there was some Windows or driver update.
I got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
Looks like something to do with 360 is cause C3D2013 to hang on startup. I have to kill the AcSettingSync.exe service to in Resource Monitor to make 2013 un-freeze.
View 3 Replies View RelatedOne of our engineer just reported that his insytalation of AutoCAD 2014 hangs when he is busy doing some hatching. I dont work with the program myself
View 2 Replies View RelatedJust installed product design suite 2013 without issue, however when I try to run Inventor 2013 it hangs at the splash screen.
The only way to exit is to kill the Inventor process. Other applications with in the design suite run fine ACAD, Fusion etc.
I did read a post about a windows security update causing this, but I do not have the offending update loaded so it can't be this.
Windows 7 64 bit Dell Precision
Open a new file and things work fine.Open a sheet set in Sheet Set Manager and every 60 seconds for 25 seconds AutoCAD hangs.Unplug the network connection and it runs fine.Hangs even if Sheet Set is on Local DriveTime of hang is dependent on when AutoCAD starts not dependent on when Sheet Set is opened.Do not have to have a file in the sheet manager loaded.Don't have to be doing anything. Can leave cursor on screen and still happens like clockwork.Turned off all sync to AutoDesk 360.
View 2 Replies View RelatedI'm using Autodesk Inventor Pro 2013.
I have a middle complexity model, with several decals (,jpg, Using Mask), projected to different parts. When I start Studio, and start rendering, Inventor hangs. The render window opens, but it freezes on Translating and soon both of the windows are not answering. I've checked th CPU. Inventor uses around 1G of ram, during regular use. When I start rendering, slowly it goes up around 5,5G, and eventually the Windows freezes. Rendering the same model without a decal works fine.
I've installed all the Windows updates, and the Inv2013 1.1 Service Pack. Nothing worked.
Windows 7 Ultimate 64bit
Intel Core i7 @ 220Ghz
6GB Dual Channel DDR3 1600MHz
nVidia GeForce GT 630M DDR3 1GB
I was placing final touches on paper space viewports (changing transparency settings etc), after wrapping that up, saved. Then tried to Publish. That's where things went downhill, drawing/publishing froze, forced to restart, now the drawing only loads to ~68 - 75% and hangs / freezes. Eventually, I get a message box stating that AutoCAD physical memory low, continuing will result in data loss. Task Manager claims AutoCAD is running @ ~98% (650Mb).
I can upload the drawing to AutoCAD WS and open it on my iPhone/iPad, but the 3D viewports are limited in detail.
Tried opening on a MAC and the same thing happens.
Tried clearing the Cachemax/cachemaxtotal, still nothing...
On opening a C3D 2013 drawing, C3D hangs for about 5 minutes. At the bottom of the screen is the message: "Upgrading COGO points". This drawing is only 974KB.
The drawing is being opened from a network . I tried saving it on a local hard drive. That had no effect.
I'm facing an issue when I start up the AUTOCAD 2013 on Windows.
I clicked on Autocad icon, and a message is prompted saying "Unknown Property" with a yellow triangle with an exclamation mark inside it, and the software do not start up.
The highlights: Yesterday the software was working normaly when happened a black out. I started the computer again and keep working without any issue. Today when I would keep working on the project I couldn't start up the Autocad.
I may have no prior experience of autocad, but I'm pretty sure what it is doing isn't quite right. When clicking on the IPub icon, then 'New', an options window titled 'Insert...' opens. If I click on the 'New' button the same thing happens. If I click on 'Insert Model', I get the same dialogue window. I have started following a tutorial and I cannot get the 'New' > file types window that the video author gets.
I did a reinstall (not an uninstall > reinstall) and the problem persisists. It is the 2013 version on an education license.
scince I installed AutoCAD Map 3D 2014 my Laptop is starting very slow. I have a Thinkpad W530 with a 500GB SSD, so the start up should be really fast. But scince i have AutoCAD the laptop needs about 10 to 15 minutes bevore i can open any programm. (as the lenovo update center says i have the latest drivers)
My girlfriend who has a Dell Inspiron laptop (with a normal HDD) has the same problem scince she installed autoCAD.
I just installed AUTOCAD 2013 on my computer. Every morning when I start up, I have to reload by CUI file. My ribbons are rearranged, I have to arrange them back to how I had them. Why is this happening?
View 4 Replies View RelatedIs there a way to start a custom line type so that is starts and ends with "O". Right now, the default "FENCELINE1" has circles in it, but it starts and ends with a line.
Here's their code for the line:
*FENCELINE1,Fenceline circle ----0-----0----0-----0----0-----0--
A,.25,-.1,[CIRC1,ltypeshp.shx,x=-.1,s=.1],-.1,1
I already tried just putting the O's at the ends, and that didn't do it.
Below is a picture of what I'm looking to get. The top one is the FENCELINE1, the bottom one is just circles and lines, but that's how I want the linetype to look when they place it... so first click would have a circle, second click would have a circle, and the circles "in" the line would spread out evenly.
Just so you know... this is for guardrail inside a where house where it has the circle pillars on each end with circular pillars in the middle (every 8', but the spacing isn't crucial).
I want to start out with a new blank space, but when i click new, nothing happens, and i cant use any of the tools.
View 2 Replies View RelatedI have a user with AutoCAD 2013 installed on his work laptop. It is a Dell with Windows 7 64-bit. We don't have local IT any more and he was having problems with the computer, which is only 6 months old, so he had to send it from Michigan to Massachusettes, where our Global IT resides.
They "Imaged" the hard drive, installed a new hard drive and put the "Image" on the new hard drive. and sent it back without making sure things worked.
Now when he starts AutoCAD 2013 (vanillia), the Splash screen comes up and then he gets a Fatal Error. I have attached a capture of the error.
When he first got it back there were no drivers installed for his nVidia Quadro 1000M card, so he could not use his 2nd monitor. He found the driver and installed it and now he can use the 2nd monitor, but still had the problem with AutoCAD.
I just spent my afternoon with a prospect who just want to install Inventor 2013 from the downloaded trial version. He's on windows 7 home premium x64 SP1, everything seems fine, but he's unable to launch inventor after installing it.
We chose Inventor 2013 (not pro version) with some content center libraries, without Fusion or Vault.The installation went fine with no antivirus (he's using Microsoft security essentials) and UAC disabled (minimum level).He rebooted the computer and then tried to launch Inventor and saw the message attached.
He tried alone for 3 days, and I called him today to try different things (first we tried to install inventor pro but there was a problem with some moldflow component error 1920, which is unsolved for the moment according to the different topics in the forum).
We had to manually uninstall Inventor and the different components (delete the folders, and manually go through registry to delete the keys), then reboot, run ccleaner 3 times, and then install in C:AutodeskInventor 2013
He also tried to download and run Autocad Mechanical and has the exact same problem. The installation runs well, but when he wants to run ACAD, he has the same error message.
I want to start measure command from middle of line and insert blocks on specific distance and leave rest on ends of line or arc.
View 5 Replies View RelatedI have Autodesk Design Academy 2013 installed on a lab of computers in my domain. Students have been successfully using Inventor 2013 so far this year, and now they are trying to use AutoCAD 2013 and Mechanical 2013 but are encountering an error. When trying to start either of these programs, an MSI installer starts (I suppose for user-specific files) and then the message box below pops up:
After closing out the error boxes, the programs simply do not start. The domain users have their personal folders redirected from a network share, which is listed in the error box. Why these MSIs can't access the network location, I don't know, because the user logged in has full permissions on their own folder, and they can indeed access their folder from these computers. When I log in to the computer with a local administrative account, the programs work without error. how can I get around this so my users can actually use the software? Is there a registry key I can change to point to the local drive instead of their personal folders?
A blank Ribbon palette opens when I start up AutoCAD. It loads my custom workspace, but it also loads a ribbon palette each time aswell.
I'm using AUTOCAD Map3D 2013 Service pack 2.1
I'm sure there is a patch for this out there by now, I mean there has to be, I mean, why would Auto desk NOT want to fix this problem.
How to start menu Edit Base Solid in Inventor 2013?
When i choose Edit Solid in Inventor . start Inventor Fusion
As soon as I start up AutoCAD 2013 or 2012 64-bit, it loads all the way through and I get an error message:
FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at 0h
I have uninstalled and reinstalled AutoCAD multiple times, followed the clean install instructions.
I have run as administrator, run in compatability for XP and 7, run with the onboard graphics, run with my nVidia card, and have had no results. Boot in Safe Mode, no changes. Disabled my Antivirus when installing, and when running, no difference. Installed SP1, no difference.
Before when I was creating models the origin (0,0,0) was always set in the snap point i started the line in. Now suddenly something happend and now 0,0,0 is always starting in the Original XYZ point.
How do I get back to the old settings?
I've installed R2014 Suite, but I’m unable to Migrate Settings from the Start Menu after rebooting.I have both R2012 and R2013 installed on this computer. The Migrate Setting Tool doesn’t think I have a previous release installed – Error Message3.Then when I open R2013 (not R2014) and try it, I get Error Message4.
View 3 Replies View RelatedWhen I start the subject application, I experience delay in opening the program & error as attached appars on sreen.
View 1 Replies View RelatedJust installed 2013. After the program ran through the start up, it is displaying the menus, but I cannot see anything where the grid windows are supposed to be. I can add objects, etc, but I cannot see what I'm adding. This is Windows 7, 32 bit with Max 32 bit installed.
View 3 Replies View RelatedWhen attempting to start Revit Architecture 2013 I get the error message "The application was unable to start correctly (0xc0000007b). Click OK to close the application".
Revit Architecture 2013 has been installed on my computer since it's release in April and I have installed both updates. Until now it has worked fine and I have had no startup issues.
AutoCAD Architecture 2013 also will not start- same error message.
Oddly, Revit Architecture 2012 will start.
I have tried to uninstall Revit Arch 2013 using windows control panel, but it does not respond.
I have run Microsoft Security Essentials, Microsoft Malacious Software Removal Tool, Malwarebytes, and Super AntiSpyware. So far, the computer looks okay. The only thing questionable was the installation, and immediate uninstall of the iLivid download manager.
I can't start smoke neither 2013 nor 2012.
The Console get me this message:
Jun 03 10:16:12 : WARNING: Unable to run with vref
Jun 03 10:16:12 : Effective User ID not 0 (root) !
Jun 03 10:16:12 : Aborting....
Jun 03 10:16:12 : Effective User ID not 0 (root) !
Jun 03 10:16:12 : Aborting....
Jun 03 10:16:12 :
I have a client that installed CS6 Productiom Premium with a volume license on multiple Mac Pros and is saying that Illustrator hangs upon launch, meaning, it will take 1-2 minutes to launch the program. Out of all the computers he has installed the software with, one does not have an issue with start-up and launches almost immediately. He is currently looking on his end what is different on that machine compared to the others.
I have walked him through the steps in deleting his Font cache and resetting his preferences and he still reports a hang-up on launch.
He has Mac Pros with Lion on them.
Is Kaspersky Anti-Virus interfering with Gimp start up??? ever since I installed Kaspersky Anti-Virus 2013, Gimp takes more than 20 minutes too start up, it searches for data files for more than 20 minutes straight before my image is opened in Gimp ever since Kaspersky was installed!
View 1 Replies View RelatedCS3 Photoshop on Windows XP, I've had this and has been running fine since CS3 was first released. All of a sudden, today, with no updates installed for either software or OS, it's Crashing (not responding) on program start-up, always at same point, when says "find system profiles". I did the ctrl+alt+shift start-up and reset, to no avail. I'm about to start going into all the other clean up options... but was hoping one of the forum gurus would recognize what's happened and point me in the right direction without all the trial-and-error fun.
View 2 Replies View Related