When i want to print a photoshop document it takes a long time for the dialogs box to show up and from there on every click takes five minutes for photoshop to react. It might hasve something to do with a print pofile I installed for a dye printer but I have deleted tha printer and stil have the problem. May-by som way to reset the printer prifiles but I have no clue on how to do this.
View 2 RepliesInstalled Elements 10 on Win 7 64 bit laptop that is plenty powerful.Created a shortcut to launch Elements directly from the directory it installed in. It can take several minutes to open, if it does. Have tried Run as Admin, no difference. Sometimes nothing happens and I have to try several times to get it open. Once open I went to Preferences and turned off all Media Analysis, and all Third Party things and anything else that might be slowing it. Only imported about 50 files into the album, and it still takes so long to open I can't tell it is even trying.
View 7 Replies View RelatedRonj2 - 4 hours ago
X4 works fine for me on my 2yr old Vista 64bit quad machine with 8gigs except that it takes almost 5 minutes to boot up so I can use it.
The application boots up to the edit screen than I just get the busy signal for the next 4-5 minutes. Task manager shows it is not responding. Works fine after that.
I also have X2 and it works just fine. If I make any changes to the uncataloged folders or file format exclusions under preferences in X4 it does the same thing (5 minites wait) untill the changes have taken affect. With that in mind I believe its a cataloging issue. Once its up and running its no problem. This is a trial if that makes any difference.I have tried the reset while booting it up ( hold down the crtl & alt keys) and that causes the program to crash after I select okay from the reset menu. The program is reset though after reloading it.
I don't use a graphic card and can not get GL 3.0 support or higher if that maked any difference like it does with Corel DVD movie factory which won't work on my computer.
Today I have a lucky day by finding the reason why X4 saving project costs minutes each time I do. I bought special to be as fast as possible a Medion Pentium 5 SSD harddrive computer and installed the Videostudio software all on the SSD drive to get as much speed as possible for editing, rendering, etc....But last few month it did take minutes to save a project each time I did and could not find the reason why. I did change directories and locations on the harddrives and lots of other things to get it good to work, but now I have found the reason, it is the smartsound track what makes the problem. Without smartsound music everything works ok with saving projects in seconds.
Other Thing what makes problems is the 15 minutes limit for youtube in videostudio. I have more than 90 movies now at youtube, but have to upload them outside videostudio because their lengt of more than 15 minutes.Some movies are more than one houre and at youtube goes everything well without any problems.
I have New iMac and processing works fine. However, 90% of the time I get a "circling wheel" for 2 to 5 minutes when I save or rate a photograph.
View 4 Replies View RelatedAlso with LR4.1 the problem with avis (Canon Powershot Ixus 95IS) is not yet solved onm my system (AMD 6 Core, Win7 64Bit, 8GB RAM, ATI HD 5770 graphics card).
AVIs don't play when I want to start them in my LR3 converted catalog. Importing avis in a new catalog doesn't work at all. But the worst thing is, if you try to import pictures in a catalog already containing avis (or if there any avi is present in a folder you want to synchronize) it takes 10 minutes.The processes dynamiclinkmanager and dynamiclinkmediaserver are blocking the import for several minutes.
I have a 16GB Raster that we use for Design/Proposal purposes. Is there anything I could do to potentially improve load time or is this something I'll just have to live with?
Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013
If I try to hatch, it takes minutes for the command to process. Any settings I need to check?
View 6 Replies View RelatedIs Kaspersky Anti-Virus interfering with Gimp start up??? ever since I installed Kaspersky Anti-Virus 2013, Gimp takes more than 20 minutes too start up, it searches for data files for more than 20 minutes straight before my image is opened in Gimp ever since Kaspersky was installed!
View 1 Replies View RelatedMy system:
- AMD 6 core CPU
- 8GB Ram
- Win 7 64bit
- AMD Radeon HD5770 graphic card.
LR4 takes 10 minutes or more to import 3 pictures. Importing these pictures in LR3 takes a few seconds.I did some checks: Using a new catalog (and not the converted one) and importing a sub folder of my picture directory has no effect. It takes also very long.
Importing a sub folder without videos is fast! But even if the videos are already imported (because of using the LR3 converted catalog), when adding new pictures to a subfolder it takes again 10 minutes. Importing videos in a fresh catalog does not work at all (they are only available if you convert the LR3 catalog) (Canon Powershot Ixus S95)
I have also a problem with playing (the LR3 catalog converted) videos. The video control bar does not react. After some minutes there is an error message that there was an error trying to work with the picture.
I am using windows 7 home edition and lightroom 4.1, and since the installation of the new version things slowed down.
View 1 Replies View RelatedI hit Print. It takes at leas t10 secs... then if I change the number of copies, go into print settings, it takes another 30 secs..Photoshop cs4 and 5 do this.
Windows XP 64
Dual Quad Core
8gb ram
plenty of HD space this happens with numberous files and printers... we have several HP 1050c plotters, Sharp printers, etc..
Currently we change our printing equipment, Kyocera to HP.The problem is that before printed instantly (in seconds) and now it takes 20 minutes to 45 minutes.
For example:
1. - A 2D file with 655 KB they send to print and goes to the print queue with a weight of about 40 MB.
2. A 2D file with 2MB send it to be printed and the print queue with a weight of about 40 MB.
HP 9050 with PCL6 Universal Printer Driver, to which was added more memory and hard drive and still the same.
Win XP sp3
AutoCAD 2010 with the service pack installed
2GB RAM
NVIDIA Quadro SX1700
Every time need to Print on IdesignCS2 and press the print dialogue it takes for ages before it shows up. I have a feeling that its due to the excessive amount of printer drivers installed. Where can i find them to delete them cause i don't use them!
View 4 Replies View RelatedI have a fairly simple 3D model in ACAD ARCH 2011. I am rendering it to a viewport on a layout that contains the company border / title block. If I render the model (presentation quality) to model space and send that to the printer (color laser) the print comes out in about 60 seconds or less. However, if I render the same image and quality to the viewport on the layout and send that to the printer, it takes between 10 and 15 minutes for the image to print. The layout is simple - just line workd border and title block. The images are identicla when finally printed.
Why does it take SOOOO much longer to print when with a layout as opposed to not with a layout? The rendering to screen takes the smae amount of time either way - it's just the printing procvess that is bogged down by using a layout.
When I try to plot my drawing, my drawing only takes up 2/3 of the page on print preview. The top half of the page is blank. How can I make my drawing take up the whole available page?
View 9 Replies View RelatedI am currently using a windows 7 Toshiba laptop. I have downloaded the free trial of Photoshop but after around 5 mintues of use, it encounters a problem and has to close. Unfortunately, windows can not find the problem. I am therefore unable to do any work. I have tried restarting the laptop several times but it still keeps happening.
View 2 Replies View RelatedI just upgraded to CS6. I cant do anything in photoshop for more than a minute or so before it crashes. Both the 64 bit and 32 bit versions.I have reinstalled twice and applied all of the available updates. Tried running them as administrator with the same result.
I also updated my display drivers to the latest version and I do not have any fonts installed other than what comes with windows.This is a brand new computer Windows 7 64 bit
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 13.0.1.0
Application Timestamp: 5022da52
Fault Module Name: atioglxx.dll
Fault Module Version: 6.14.10.11762
Fault Module Timestamp: 5008c66c
[code]...
since I´ve installed Photoshop CS6 from the cloud with all the latest updates, the program crashes all day long, its really frustrating... I´ve never had similar issues with CS5 before. I´m running out of memory when opening a file (no matter how big!) and the program freezes, doesn´t respond any more.
View 15 Replies View Relatedall of a sudden from today every 5 minutes ps crashes.
it crashes when ever i maximize a window.
I thought Adobe fixed the complaince issues with Vista already? It freezes up and crashes constantly,
View 3 Replies View RelatedI just installed CS4 ExtendeedI'm running Windows XP, SP2, 2.2 GHz, 512 MB of Ram, 55MB free space on hard drive,Anybody know why CS4 keeps shutting down and how I can fix it?
View 4 Replies View RelatedI download & installed PS CS3 Ex & after restart: product license has expired.
How to reactivate without reinstall?
When I run CS4, after about 5 minutes ( of non-use), it closes automatically.
It was working fine until last night.
I have Windows XP Home Edition.
Basically PS is freezing up temporarily, after 2-3 minutes then it becomes usaable again until it decides to feeze again. I do most of my editing in Lightroom, and only use PS because I like to just do soem finally touch ups if needed (bit of dodge/burn) and i like to use photokit sharpener (I like to brush in sharpening with actions i have created).So, i can't say for sure what initiates the freezing. Sometiems its while trying to brush in sharpening, other times it won't allow me to save.
I'm on Mac using Snow Leopard. 4Gb RAM. I use a logitech mouse. I had previous been using CS4 with zero problems.I've tried unchecking "save in backgrorund" as well as "use graphics processor"
I have Photoshop CC on windows 8 machine with 16GB RAM and 2 GB Graphics card. The moment I starts the Photoshop, my machine freezes for 2-3 mins, disk usgae shooting to 100%. I have tried every steps to optimise my windows as well as photoshop. But the problem remains still.
View 2 Replies View RelatedPhotoshop cs5 keeps crashing after a couple of minutes?
View 3 Replies View RelatedPhotoshop CS will take approximately 7 minutes to boot if I don't goto:
C:Program FilesAdobePhotoshop CSPlug-ins
And place a ~ in front of the Imports & Exports folder (a ~ in front of a folder name will prevent PS from loading that folder's contents on boot)
The only file in this folder is:
TWAIN_32.8BA
Also, I have to goto:
C:Program FilesAdobePhotoshop CSPlug-insAdobe Photoshop Only
And ~ out the Automate folder (and the Online folder inside it) or I'll get another extremely long timeout on booting)
Does anyone know how I can re-enable these things?
The "ONLINE" folder got me thinking. I'm using a hardware firewall and a software firewall. But even when I disable the software one, I still get the long boots.
I am a paying subscriber of Adobe CC and my problem is this. After about 15 minutes of use in Photoshop CC (32 or 64 bit), it suddenly stops letting me either create a new file or open an existing one. I select File->New->the new document dialog appears and I select the defaults and click OK. Nothing happens. Same thing with File->Open->select an existing image file and it never appears.
If I reboot my computer or logout and sign in with a different account, re-open Photoshop CC, it allows me to create and open files without issue...for about 15 minutes and then the same thing happens. This is NOT an illegal copy of the program! I am a paid subscriber.
My computer is a MacPro
OSX v. 10.7.5
Processor 3.33 GHz 6-Core Intel Xeon
48GB 1333 MHz DDR3 Ram
Both the Start up disk and the Data Disk are SSD Hard Drives
I'm running the latest PS CD6 v.13.0 x64 it's NOT the fastest computer ON THE PLANET..
I'm using PS during the day (I'm a professional photographer and I use PS about 6-8 hours a day).....Liquify gradually get's slower and slower to open. By the end of the day it's taking 6-10 minutes for Liquify to open. I have to literally "RE-BOOT" my computer to get it to start working properly. And...for goodness sake....do not LEAVE Photoshop open over night...by the next day....I can't even open a JPG it's so slow...
NOW...compare that to my LAPTOP....MacBooK Pro.....no where near the processing power and no where near the Ram copacity....and PS CS6 opens perfectly....Liquify POPS OPEN so fast I can't even blink my eyes before it's open.
Why is the faster more robust computer opening LIQUIFY slower than the lesser computer?
I installed Mavericks onto an imac running 16gb ram, 3.4ghz HD. I'm running Photoshop CS6 version 13.0.5 & using a wacom with the latest drivers 6.3.7-3. I've had no issues previously but since installing Mavericks every 3 or 4 minutes communication is lost with the keyboard.
By that I mean Photoshop will no longer respond to any keyboard shortcuts. I can keep working in Photoshop, it does not freeze completely but I'm locked into the tool i'm using unable to zoom in/out or any other task via the keyboard .If I exit the app and then return to it the keyboard functionality returns also.
I am also able to jiggle the keyboard back into action by clicking away form the work area and onto another palette. Returning to the work area brings back the keyboard. Bluetooth keyboard & batteries changed too.