I hit Print. It takes at leas t10 secs... then if I change the number of copies, go into print settings, it takes another 30 secs..Photoshop cs4 and 5 do this.
Windows XP 64
Dual Quad Core
8gb ram
plenty of HD space this happens with numberous files and printers... we have several HP 1050c plotters, Sharp printers, etc..
Every time need to Print on IdesignCS2 and press the print dialogue it takes for ages before it shows up. I have a feeling that its due to the excessive amount of printer drivers installed. Where can i find them to delete them cause i don't use them!
View 4 Replies View RelatedI have a fairly simple 3D model in ACAD ARCH 2011. I am rendering it to a viewport on a layout that contains the company border / title block. If I render the model (presentation quality) to model space and send that to the printer (color laser) the print comes out in about 60 seconds or less. However, if I render the same image and quality to the viewport on the layout and send that to the printer, it takes between 10 and 15 minutes for the image to print. The layout is simple - just line workd border and title block. The images are identicla when finally printed.
Why does it take SOOOO much longer to print when with a layout as opposed to not with a layout? The rendering to screen takes the smae amount of time either way - it's just the printing procvess that is bogged down by using a layout.
Just as the title says, every time i start photoshop CS2 (latest update) (windows xp) the first image always takes a long time to load (e.g. 30 seconds) no matter the image or how long i give photoshop to load first.
View 1 Replies View RelatedI'm running CS4 in XP on a fast system with plenty of RAM. The last few weeks, loading up is taking a looong time. The start-up screen shows "reading preferences" for 2 - 3 minutes most times. I've re-set and trashed my preferences file with no change. I've also removed all plug-ins, also with no change. Once PS is up, it works normally. Does anyone have any suggestions?
View 5 Replies View RelatedInstalled Elements 10 on Win 7 64 bit laptop that is plenty powerful.Created a shortcut to launch Elements directly from the directory it installed in. It can take several minutes to open, if it does. Have tried Run as Admin, no difference. Sometimes nothing happens and I have to try several times to get it open. Once open I went to Preferences and turned off all Media Analysis, and all Third Party things and anything else that might be slowing it. Only imported about 50 files into the album, and it still takes so long to open I can't tell it is even trying.
View 7 Replies View RelatedI've noticed this with several other Adobe apps, but it seems to happen with Illustrator the most, it takes forever to shut it down. Why is it such a chore and a resource hog for this program to just close? Half the time, I need to use the Windows Task Manager to just force the program to close, because it's slowing down my system, and I don't have all afternoon to wait around.
View 3 Replies View RelatedI am currently working on After Effects CS6 and I'm wondering why it takes a long time for me to render a composition. I am not sure if the problem is with the mac that i am using or with the settings i have on AE. When I render the composition of 21 seconds video with 1080p 29.97fps it takes 5 hours and eralier i triend rendering again and it takes 7 hours. is this normal?
I am using Mac with this spe
Processor 2 x 2.4 GHz 6-Core Intel Xeon
Memory 12 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5770 1024 MB
Why does it take so long for illustrator to save a file when InDesign seems so much quicker?
View 5 Replies View RelatedWe are working in a shared storage environment with 4 editors runnig Premiere Pro CC. We set up a Master Project with all the raw media, then split it between 2 editors to sync and create rough assemblies. Afterwards, we need to import the assembly sequences into the master project. I select a bin, Import a project file, select "Selected Sequences", Dynamic Link shows that it's connected to the project, then it takes 10+ minutes (I wish this were an exaggeration) to "load" to project so that I can choose the sequence(s) I want to import. This is even more frustrating when I import a sequence and it brings in duplicate Master Clips, forcing me to go back to the project and figure out what has change with the interpretation of the clips. Is there any way to speed this process up? Projects contain 5000 - 10,000 media elements.
View 3 Replies View Relatedwhen I first start LR4, loading the Book, Slideshow, Map and to a lesser extent, Web modules take forever. Especially the Book module - it takes a good 25-30 seconds to load. Once it's loaded it's fine. I've been told everything from "that's normal" to there's something wrong with my computer.
Laptop Spec's - Spring 2010 15" MBP 2.4 i5 with 8gigs of RAM, 256mb video RAM, 500gig 7500rpm HD.
Other's have reported similar delays (none reaching 25-30 seconds though), where as others don't have any issues at all.
We have a large assembly that we've been trying to get details views off of and it's taking anywhere from 15 to 45 minutes to create each detail view. IDW. We're using LOD and derived assemblies as it's 5000+ parts, but Inventor is simply bogging down and sucking system resources in the creation process. I've used every trick in the book that I know, butIt's taken me all day to get one drawing done.
View 9 Replies View RelatedAs title says, I create a new Excel Data Link using "Data Link Manager" but it takes forever! If so, how can I get rid of waiting long time when creating/editing a Data Link?
View 0 Replies View RelatedI have recently upgraded to 2013 FDS and now when I try to import Acad files (sometimes up to 2000 solids) it takes virtually a full day to import one file. When I had 2011 I could import these files much faster.
View 1 Replies View RelatedI just converted a PDF file from a DWF file (from AutoCAD 2012). I also needed to print the PDF; unfortunatley, the PDF is taking forever to print.
This is what I did.
-I went under Plot-Model
-Under the Printer/plotter, I clicked DWG to PDF.pc3 and click on Properties
-Click under the Device and Document Settings tab
-Click on Custom Properties
-Click on Custom Properties buttom
-Under the DWG to PDF PRoperties table, I click on Capture all under Font Handling
-I uncheck Include Layer information under Additonal Output Setting
-I click ok
When I begin to plot under Batch Plot, I also went and click on Publish Options, and on that table under Layer information, I click on Don't include.
For some reason, it's printing very slow. I don't know what other option I have in order the print faster.
Here's the files for you to look at just in case [URL] .....
When i want to print a photoshop document it takes a long time for the dialogs box to show up and from there on every click takes five minutes for photoshop to react. It might hasve something to do with a print pofile I installed for a dye printer but I have deleted tha printer and stil have the problem. May-by som way to reset the printer prifiles but I have no clue on how to do this.
View 2 Replies View RelatedWe have a data folder on the server mapped as network drive to the clients. The data folder contains all cad data stored from productstream professional.
Due to an over 10 year old environment the data folder contains a huge amount of cad files, library parts, iParts and so on.
Due to historical growth of the environment there are some missing parts (not available on the file system anymore), because they were deleted, are corrupt, and so on. At the root of the data folder there is located the typical cmpinv11.ipj inventor project file.
If you open an assembly either from productstream or via inventor (without productstream) directly from the data folder and the assembly has an unresolved child component because the file isn't there anymore it takes a very very long time until the dialog box for unresolved link comes up (waiting time several minutes 1...10min). Once reached this point one can skip and repair the assembly, of course.
But the question is, how to speed up the time for getting the unresolved link dialog?
The network connection itself is quite OK und the project file itself is also OK. The project file list of every user is pretty small (only cmpinv11.ipj and some standard ipj's).
We think inventor internally scans the whole project-file folders to ensure that the component is really missing but due to the huge environment this takes many minutes and is annoying.
Any bypass for that? Is it possible to apply a temporär setting before opening a potential inconsistent assembly? Or is there a setting like skip unresolved components by default or by a defined timeout?
Because it is Inventor 2010 (Productstream PRO 210) there is no File open Option Auto-Skip unresolved components (like in 2012) but even if it was I guess it wouldn't reduce the time to get the dialog either.
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Operating system, CS5 suite and printer drivers all updated.
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
When I try to plot my drawing, my drawing only takes up 2/3 of the page on print preview. The top half of the page is blank. How can I make my drawing take up the whole available page?
View 9 Replies View RelatedMy company is exporting Postcards in Illustrator CS6. What we do is have a large data set imported into the Variables applet and use the Actions applet to record and export action and play it through the whole data set. We later combine the PDF files and print them as a batch.
My question is: Is there a way to create an action that will automatically print the data set while avoiding the print dialog box? It will make the process simple and move faster.
Also, what are your was of creating postcards? Catalogs?
How do people create a catalog with over 60 pages and keep the file size low?
the Print Dialog simply will not show up so I can adjust the ICC profiles etc.I have CS6 Upgrade installed (upgraded from CS5) and running on a Windows 8 PC.
View 8 Replies View RelatedI've a question regarding the Print dialog that states "Needs Calibration" just below the drop down for selecting printers. The selected printer is a HP Photosmart C7180 and PS CS5.5.
What calibration PS is refering to? I've tried the built in pen and color adjustment on the printer but that operation does not seems to be of interest by PS.
Some paper companies have released a new paper size-9x13.
I find this excellant for fireworks and certain architecture prints.
Problem is that in CS6 I cannot adjust Set Up dialog to get entire paper printed correctly. The printer(both Canon's 9000mkii/9500mkii) always have a border. Red River(the paper I use) sez use 8x12 but there is no 8x12 setting.
the paper size in the CS6 Print menu (PS Manages Color) so the copy is inked 100%?
Print setting on a printer dialog is not responding. Now I have a new printer driver (Epsom stylus Photo R800)I cannot set paper size.This is a recurring problem. I have been trying to relaunch app holding control+ option+shift without effect.
View 49 Replies View Relatedwhy the advanced print options "Splash features" are not available any more? We have purchased CS5 but can not use it until we get them resolved. Clients are running OS X 10.6 Printer Docucolor 240 with a Splash RPX-II rip.
View 3 Replies View RelatedI cannot seem to see the custom Printer Profiles I have for certain papersin the Print Dialog.I have added the Print Profiles to Library > Application Support > Adobe > Color > Profiles (and also in Recommended)
But in the Print Dialog under Colour Management > Photoshop Handles Colour > Print Profile - they are not showing. I have done things like restarting Photoshop and converting the image to CMYK from RGB.
I can see the profiles in the Proofing menu and am able to select them.without using the profiles my colour management is completely off kilter.Also, can I confirm that I am putting the printer profiles in the correct folder?
how do i open print preview dialog box?
View 1 Replies View RelatedIt's a Q6700, 4GB, 2TB drives, Epson R2880 running Windows 7, 64-bit. CS4 is very peppy, runs great, opens, closes, edits, NO PROBLEM.
UNTIL you decide to print. Once you hit the print selection it takes a MINIMUM of 40 seconds for the CS4 print dialog to appear. If you then hit the "page setup" button, it'll be at LEAST another 30 seconds before that appears. Once they're up, you can navigate around and make changes, but once you hit the print button on the dialog it'll be another 10-15 seconds before it responds and if you specify "Print Preview" it'll be at least another 30 seconds before you get the preview. Once it hits the printer, it prints fine. There haven't been any software or hardware changes in weeks, except the weekly MS updates that get installed.
I've tried large images, and small images in case there was something CS4 was doing. This process is this slow when printing a 4x6 greeting card or a 12 x 18 photograph.
What's interesting is this is a new phenomenon... It worked FINE up until sometime last week. Then suddenly, slow....... Concurrently, the print dialog STOPPED DISPLAYING INK LEVELS. The status monitor still displays them, but the printer dialog no longer does.
I've unloaded the printer and cleaned off every file I could find that appeared to be associated with an Epson print driver. Went to Epson and got the latest, Windows 7, 64-bit set of drivers and status monitor and installed that. No difference. Also tried a new USB cable AND switched it to the other USB port on the printer and on the PC. Nothing's made any difference......
If necessary, I can have her re-install CS4, but is there anything that should be done before we start clobbering major applications, or ever worse, the operating system?
I have multiple printers and in CS6 about 75% of the time the dialog box does not come up it just goes straight towards the default printer Is this a glitch or is there a setting becuase previous versions of Illustrator always brought up the dialog to select page size, printer, seperations, etc. Using OSX Mountain Lion
View 4 Replies View RelatedIn the Snippet Ilogic examples can be found a code example to pop up the "Save File Dialog":
Dim oFileDlg As inventor.FileDialog = Nothing
InventorVb.Application.CreateFileDialog(oFileDlg)
On Error Resume Next
oFileDlg.ShowOpen()
Code to show the print dialog?
As I understand, Gimp make GTK, used in Gnome. GTK provides a dialog for selecting a printer and specifying the options for that printer. My problem is that whenever I'm faced with this dialog, it's a completely random set of settings; it's not the printer defaults (specified in CUPS) and it's not the last-used settings either for the user or the application.
It's a big productivity issue when I regularly print documents and high res photos and need to change ~10 or so options each time. Invariably I forget to change one of them and have to print something twice.
Is there any way to control these default print settings? I'd like it to pick up the CUPS defaults for the print queue selected.
