In the Snippet Ilogic examples can be found a code example to pop up the "Save File Dialog":
Dim oFileDlg As inventor.FileDialog = Nothing
InventorVb.Application.CreateFileDialog(oFileDlg)
On Error Resume Next
oFileDlg.ShowOpen()
Code to show the print dialog?
On a few random idw files we are seeing the default "Number of copies" in the settings section of the print dialog box with strange high numbers in this case 693965387. As soon as the user selects a different printer the number drops to 1. If the user selects the printer properties and navigates to the advanced page the Copy Count is 1969. I have checked the default printer settings and it is set to 1 copy.
View 1 Replies View Related-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Operating system, CS5 suite and printer drivers all updated.
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
My company is exporting Postcards in Illustrator CS6. What we do is have a large data set imported into the Variables applet and use the Actions applet to record and export action and play it through the whole data set. We later combine the PDF files and print them as a batch.
My question is: Is there a way to create an action that will automatically print the data set while avoiding the print dialog box? It will make the process simple and move faster.
Also, what are your was of creating postcards? Catalogs?
How do people create a catalog with over 60 pages and keep the file size low?
the Print Dialog simply will not show up so I can adjust the ICC profiles etc.I have CS6 Upgrade installed (upgraded from CS5) and running on a Windows 8 PC.
View 8 Replies View RelatedI've a question regarding the Print dialog that states "Needs Calibration" just below the drop down for selecting printers. The selected printer is a HP Photosmart C7180 and PS CS5.5.
What calibration PS is refering to? I've tried the built in pen and color adjustment on the printer but that operation does not seems to be of interest by PS.
I have multiple printers and in CS6 about 75% of the time the dialog box does not come up it just goes straight towards the default printer Is this a glitch or is there a setting becuase previous versions of Illustrator always brought up the dialog to select page size, printer, seperations, etc. Using OSX Mountain Lion
View 4 Replies View RelatedI hit Print. It takes at leas t10 secs... then if I change the number of copies, go into print settings, it takes another 30 secs..Photoshop cs4 and 5 do this.
Windows XP 64
Dual Quad Core
8gb ram
plenty of HD space this happens with numberous files and printers... we have several HP 1050c plotters, Sharp printers, etc..
As I understand, Gimp make GTK, used in Gnome. GTK provides a dialog for selecting a printer and specifying the options for that printer. My problem is that whenever I'm faced with this dialog, it's a completely random set of settings; it's not the printer defaults (specified in CUPS) and it's not the last-used settings either for the user or the application.
It's a big productivity issue when I regularly print documents and high res photos and need to change ~10 or so options each time. Invariably I forget to change one of them and have to print something twice.
Is there any way to control these default print settings? I'd like it to pick up the CUPS defaults for the print queue selected.
I need to initiate print dialog. Action must be completely the same like pressing Cntr+P on keyboard.
When I use this code:
var colorOptions = new PrintColorManagementOptions();
colorOptions.name = "ColorMatch RGB";
colorOptions.intent = PrintColorIntent.ABSOLUTECOLORIMETRIC;
colorOptions.colorProfileMode = PrintColorProfile.SOURCEPROFILE;
[Code]...
I get error message: "Can't print the illustration. The Color Management setting are inconsistent."
Since upgrading to InDesign CC I have noticed that all print progress dialog boxes stay on top of all windows, even after switching apps. I find this highly annoying and want it to go away. Is there a preference I can change to make it NOT be on top, especially when I've switched to a different application?
View 2 Replies View RelatedSome paper companies have released a new paper size-9x13.
I find this excellant for fireworks and certain architecture prints.
Problem is that in CS6 I cannot adjust Set Up dialog to get entire paper printed correctly. The printer(both Canon's 9000mkii/9500mkii) always have a border. Red River(the paper I use) sez use 8x12 but there is no 8x12 setting.
the paper size in the CS6 Print menu (PS Manages Color) so the copy is inked 100%?
Print setting on a printer dialog is not responding. Now I have a new printer driver (Epsom stylus Photo R800)I cannot set paper size.This is a recurring problem. I have been trying to relaunch app holding control+ option+shift without effect.
View 49 Replies View Relatedwhy the advanced print options "Splash features" are not available any more? We have purchased CS5 but can not use it until we get them resolved. Clients are running OS X 10.6 Printer Docucolor 240 with a Splash RPX-II rip.
View 3 Replies View RelatedI cannot seem to see the custom Printer Profiles I have for certain papersin the Print Dialog.I have added the Print Profiles to Library > Application Support > Adobe > Color > Profiles (and also in Recommended)
But in the Print Dialog under Colour Management > Photoshop Handles Colour > Print Profile - they are not showing. I have done things like restarting Photoshop and converting the image to CMYK from RGB.
I can see the profiles in the Proofing menu and am able to select them.without using the profiles my colour management is completely off kilter.Also, can I confirm that I am putting the printer profiles in the correct folder?
Is there any way to programmatically call up the print dialog? Or is there some sort of "send keys" function similar to the corel vba?
View 4 Replies View Relatedhow do i open print preview dialog box?
View 1 Replies View RelatedEvery time need to Print on IdesignCS2 and press the print dialogue it takes for ages before it shows up. I have a feeling that its due to the excessive amount of printer drivers installed. Where can i find them to delete them cause i don't use them!
View 4 Replies View RelatedCorelDraw X5 (German Version 15.0.2.0695):I've installed Corel X5 under Windows 7 Ultimate 64 Bit.
When I try to set up my ppd-file in the printer dialog window, I can chose the ppd-file but the OK-button (öffnen) doesn't work. Clicking by mouse or by Enter button at the keyboard: nothing happens, the ppd-file won't be accepted. It seams the OK-button is out of any function in this window.
It's a Q6700, 4GB, 2TB drives, Epson R2880 running Windows 7, 64-bit. CS4 is very peppy, runs great, opens, closes, edits, NO PROBLEM.
UNTIL you decide to print. Once you hit the print selection it takes a MINIMUM of 40 seconds for the CS4 print dialog to appear. If you then hit the "page setup" button, it'll be at LEAST another 30 seconds before that appears. Once they're up, you can navigate around and make changes, but once you hit the print button on the dialog it'll be another 10-15 seconds before it responds and if you specify "Print Preview" it'll be at least another 30 seconds before you get the preview. Once it hits the printer, it prints fine. There haven't been any software or hardware changes in weeks, except the weekly MS updates that get installed.
I've tried large images, and small images in case there was something CS4 was doing. This process is this slow when printing a 4x6 greeting card or a 12 x 18 photograph.
What's interesting is this is a new phenomenon... It worked FINE up until sometime last week. Then suddenly, slow....... Concurrently, the print dialog STOPPED DISPLAYING INK LEVELS. The status monitor still displays them, but the printer dialog no longer does.
I've unloaded the printer and cleaned off every file I could find that appeared to be associated with an Epson print driver. Went to Epson and got the latest, Windows 7, 64-bit set of drivers and status monitor and installed that. No difference. Also tried a new USB cable AND switched it to the other USB port on the printer and on the PC. Nothing's made any difference......
If necessary, I can have her re-install CS4, but is there anything that should be done before we start clobbering major applications, or ever worse, the operating system?
Here's the screen shot. If I ignore the preview, and set with the print area tool, I get what's in the print area tool. Something is amiss in the land of tiling settings, but I can't get to whatever setting is messing this up.
View 1 Replies View RelatedI need to add a "Gauge" value to show up in the iProperties dialog box under the Project tab, but I don't know how or if I can.
View 9 Replies View RelatedCreating feature edit dialogs? I currently have working program that creates a custom pocket/cavity but I'm having trouble with the User Interface and setting up a solid structure to handle events.My goal is to mimick how the "add hole" dialog works by having the following attributes:
- Ribbon button to bring up dialog
- Dimensions update when the dialog text boxes are updated
- Right click menu to edit existing features
- Existing dimensions and other properties are loaded when the dialog is used to edit existing features
So far, I have my classes structured this way:
AddinServer (handles loading and unloading the command) ->
CavityCommand (defines the buttons and containes event handlers) ->
CavityFeature (wraps up multiple identicle cavities into one client feature) ->
Cavity defitions (draws individual cavities using more specific classes)
Is there a way to widen the InputlistBox dialog box used in iLogic without having to resort to a form instead? I am unable to resize it manually when it appears and don't know of any arguements in the iLogic function that can change the width.
I have attached an image which illustrates what I'm trying to achieve. See "Listbox.gif"
The drop down arrow and check mark have disappeared from my Edit Dimension Dialog Box. What are the setting to turn those back on?
View 4 Replies View RelatedI have the simple (for you ) question about hole tolerance window: I want to open hole tolerance dialog box and "click" OK button (ofcourse I want to do that via VBA code). Only this, I wouldn't change tolerance type or value of tolerance.
I show you what I want on screen.
way to customize iProperties in order to meet our companies B.O.M. standards. We need to be able to show, item quantity, part number, description, material spec, length in inches, and total of length x qty and weights x qty. We would like to set up iProperties so that when we input the values for each property our BOM will be completed, is this possible?
View 1 Replies View RelatedI have a brand new Dell M90 Workstation (1 week old) with Nvidia Quadro Fx2500M Video Card (Certified). Both the context menus and dialog boxes are disappearing off the screen at different times - they are still there because when the mouse is moved across the area parts of the boxes reappear. Dell has replaced the video card, hard drive and motherboard and still the same problem.
View 9 Replies View RelatedIs it possible to open the iProperties dialog from the api for a specified document, not necessarily the active document.
View 3 Replies View RelatedAll of the sudden I cant get to my bolted connection dialog box.
1. The command runs and the prompts at the lower part of the screen show.
2. Have loaded and unloaded / restarted via add ins.
3. Have looked behind all windows ect on both of my 2 screens
running on Windows 7 is seeing files categorized in his Inventor Routed Systems Open dialog categorized by:
Today
Yesterday
Last Week
Last Month
He doesn't recall it always being like that (and I've never seen it on any system I've used).
When he opens a Word file, those files are not categorized that way.If he switches to "List" he just gets all files but he doesn't get the detail he wants if he were using "Detail".
Inventor Product Design Suite 2013sp2
Windows 7sp1 64-bit
nVidia Quadro 2000