After Installing Sp3 PSP X4 does not start. I only get Error message:
Error: Versions must match.
Master = 14.2.0.1
RC = 14.3.0.1
I tried to install it also on a Windows 7 computer with same result.What to do?
In this version PSP-X6 I am not able to activate my plugins. Here's what I did started the application and went to File /Preferences / File Location / Plugins. I added the folder where I have my plugins and selected the Enable Adobe plugins, Limit plugins w 8B? ext., Folder option enable, use sub folder, click OK then closed out the application and re-started PSP and open a picture with into effects, plugins and none of my plugins are available to be used.
View 2 Replies View RelatedJust installed PSP Pro X4 and tried to uninstall X3. Can't do it. Tried three times. Get an error msg: "The Installation Wizard encountered a problem while trying to configure your software.
Could not access file: c:users homasappdata....setup.msi -- The system cannot find the path specified. Would you like to continue? Yes No" When I choose Yes I get another error msg that says: "Installation Wizard not complete. Your system has not been modified. To complete installation at another time, please run setup again. Click finish to exit the wizard. You do not have sufficient privileges to complete this installation. This installation requires administrative oo elevated privileges. Please contact your administrator and then retry this installation."
I am running Windows 7 SP1. I have tried uninstalling using Revo Uninstaller, twice. I have also tried opening it by using the shift key which did reset the preferences but still won't open. I have turned off DEP svs for it.I have tried just about everything and I am very upset.
View 7 Replies View RelatedI installed PSP x6 ultimate using the install 32 and 64 bit versions. I tried to install the kpt and creative content and get the following message-
"setupnewsetup.cpp(143)
PAPP:
PVENDOR:
PGUID:
$15.0.0.498
@windows vista service pack 1 (7601)
IE version:9.11.9600.16428"
I also get the same error message using the 2nd dvd to install "perfectly clear" and "ultimate creative content".
I am running windows 7 pro and don't know why I am getting the error messages. Could this be because they do not run on the 64bit versions? If so when asked to install both versions would they run. There is no program start application for the 32 bit version even if you select install both.
While downloading the latest Service Pack 1, I get a fault-message (see attachment)
Even after deleting and re-installing Corel PSP X6 (version after initial install = 16.1.0.48)
Tried to download the SP through the program itself, but even from the download from the Corel server, i have the same result !
PaintShop Photo Pro X3 - downloaded version. System: Windows 7 Professional.
When I try to run the downloaded file, "PSPP_X3_Ult_PF.exe", logged in as an Administrator, the following message pops up and the installation stops.
PPP3 installation error message.jpg (21.6 KiB) Viewed 734 times
I cannot get PaintShop Photo Pro X3 NL to start up anymore. Windows Task Manager shows PSP to have started up - as a service only. In the meanwhile, I do get this error message:
[Webbrowser:]
["Cannot find ...:/Users/Kanis/AppData/Roaming//Corel/Messages/540229901_907002/EN/MessageCache...
Check path of the internet address."]
(I'm running my PC in Dutch; so I translated it as correctly as possible).
This message appears from the very instant that I installed Corel WordPerfect X5 on my system, i.e. February 8, 2011. Then I uninstalled WP X5 completely. However, the above message keeps appearing, whenever I try to start Corel PaintShop Photo Project Creator or PSP X3.
In order to keep on going, I installed PSP X3 on a virtual machine on this PC (O/S: Windows XP 32 bits SP3 under VMware Workstation 7.1.4 ( under host W7 Ultimate 64 NL)). It works fine from the beginning, but this is not meant to be. Therefore, on June 6, I tried a fresh reinstall on PSP X3 on the main operating system (W7 Ultimate 64 NL). The problem persisted, as before. I then uninstalled ALL Corel applications from that system, went through the entire register and deleted all traces of Corel, PSP X3 and WP X5 applications. Expelled also all traces of PSI-Service related items (also from the register). Then I made a fresh reinstall of PSP X3, and it worked. Eureka ? Until this very morning. Same old story started all over again. So obviously I have not found the root of the problem. It must have been masked for some time. What is the source of the error message? And how come it causes PSP X3 to start as a service only, and not continue. Note: note even the start-up screen of PSP X3 does show up.
Clicking on the desktop icon provided by the install of Pspx4 has the splash image appear briefly then a 'not going to do it' message box followed by Win7 'there is a problem, progam is being closed' message box.Created my own shortcut from the Pspx4 exe and the same thing happened.Using the listing in the Start Menu 'All Programs' will start PspX4.
There is no problem exporting an image from Lightroom 4 to be opened in Pspx4. That happens without fault.I applied 'run as administrator' to the shortcut I created and now that will open the software as expected.
As some know, it comes on the installation CD of PSPX3.
Quite simply, three seconds after double clicking the program icon, I get this. I'm on the second installation. Patches won't install. I get the message " product that needs to be updated not found" or something similar.
I installed a new harddrive on my laptop and restored a Ghost image of my old drive onto the new one. Most of the installed software worked right off. Some needed to be re-activated as the software detected a significant hardware change. However, PSP X3 would not start, crashing during loading. The PSP X. splash shows and the loading status gets to "initializing palettes" then Windows reports "Corel Paintshop Pro X3 has stopped working. Windows is checking for a solution...". That's it.
I have un-installed PSP X3 and reloaded from CD. I downloaded the 4 existing patches (1 through 4) and installed them in sequence. I didn't try starting PSP X3 until all the patches were in. Corel.com confirms the activation of the software.
I've used PaintShop since the JASC days and the software works great. However, since about version 9, the software has become more prone to crashing under a variety of circumstances. Now it won't start.
Specs
1.8 GHz laptop
3 GB RAM
500 GB Seagate Momentus XT drive with 4 GB RAM buffer (supposedly a "hybrid" drive)
Windows 7 Pro 64 bit
This is a strange thing : I have PSP X5 under my computer for about one year, and this morning it does not start when I click on PSP icon. When I look at the process monitoring, the exe appears and disappears 3 seconds later. I tried the restore database, nothing changed. I tried to rename the database file, no more success.
View 3 Replies View RelatedAfter installing the latest fix/update/patch Paintshop Ultimate X6 crashes continuously. After startup it goes for a minute or so and then crashes. I have uninstalled and reinstalled it without any change. I've emptied the temp directory.
View 4 Replies View RelatedI'm having a constant problem with Autocad 2010LT crashing on startup. After clicking on the AutocadLT 2010 icon the program starts to run, I see the start-up screen, and then everything disappears without any notice or error message.
I have installed service Updates 1 and 2 as well as the "Startup Error and Text Editing Hotfix". Nothing that I have read on the forums seems to fix the problem. I'm running Windows 7 Professional (64-bit). I should also mention that I have been running this version of the software on this computer without any issues for over 1 year before encoutering this problem.
Is Kaspersky Anti-Virus interfering with Gimp start up??? ever since I installed Kaspersky Anti-Virus 2013, Gimp takes more than 20 minutes too start up, it searches for data files for more than 20 minutes straight before my image is opened in Gimp ever since Kaspersky was installed!
View 1 Replies View RelatedJust came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View RelatedI recently installed some "Megalo's Plugin Pack" and it just kept crashing my paint.NET, so I tried going to the effects and file types folders and deleteing all the plugins, but there was so much I had no idea which was plugin stuff and normal paint.NET. So I just deleted everything paint.NET and tried reinstalling it, but it just says "Fatal error installing paint.NET (1603)"
View 10 Replies View RelatedI installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedWhenever you open up paint.net, it always has one white-background layer as the default layer.
Then i start drawing and after a while i realize "if i did this on transparent background i could reuse it in so many places!". So i either have to manually erase the white background carefully around every corner or restart drawing.
It would be good if the default was two layers, one white background layer and one empty layer where you start drawing. I know it's super simple to just create a new one manually when you start, but i'm often in such a rush when opening up to start drawing that i always forget.
I am looking for a way to correctly make or modify a Windows 7 Start Orb (ex: [URL]......
When I do it simply, appears a black square when I click on the Start button. All instructions on this topic are made for Photoshop, or Gimp, but not for Paint.Net
Here is one of my own, which does not work [URL].....
Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedMy program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View Relatedif is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies View RelatedI want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
how to create a Windows 7 Start orb.
View 5 Replies View RelatedHow can I restore my start screen to be it's full width.
View 9 Replies View RelatedWhen I draw a line, is there a way to say, "Start at point (864,0), go exactly 270° down (actually, I can hold down the shift key for that, but I digress...) and end at the other side of the canvas at point (864, 3456)?
A script would probably work well, but I've never dipped into that.
Every time I start PDN it creates empty 800x600 image. Is there any way to change size of image or even disable this feature?
View 2 Replies View RelatedI can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies View RelatedI got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
primere pro will not start... appliction unable to start correctly 0xc000007b
View 1 Replies View Related