I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies
This is using Civil 3D 2012 Service Pack 2.1
When a Station Equation is added to an alignment it causes all of the profile views to get messed up. In addition once the EG profile changes the entire FG profile may also need to be changed. See this video I uploaded to Youtube that fully explains and shows the problem: [URL] ........
So, any way to some how lock the profile views start and end stations? Or to some how lock the PVI locations on a a proposed profile to certain stations?
is it possible to get the start and end station of each projected objects?
see picture. what i am doing is based on the different colour. they are geotechnical requirement for the minimul fill depth. so i am thinking about making a program to put in a profile for me and then put horizontal curves. so don't need to do anything by hand. good starting point at least. save a lot of time and not really hard to code either.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I am working on road improvements, the City my client want to extend the improvement longer form the original scope of work. I am already completed the alignment and road profile centerline and the production plan is 100% completed.
What I need to do is to change and extend the alignment 750 feet backward from the original station (10+00). If I could explain correctly, I want to start the station @ 7+50 (backward from 10+00) and no changes on forward stationing.
What is the best way without doing re-creating alignment.
How and where can I adjust the station precision of the view frame start and end station. I am choosing snap to nearest foot station but I am getting 1+00.00. I would like 1+00 in the label. I am setting to start end to the layout name and mapping that to the current drawing field in SSM and do not have precision control there either.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I have a profile view created with several surfaces including a proposed surface. The stationing on the X-Axis of the profile view corresponds correctly with the PT's, PC's etc on the proposed surface profile, however the the labels that are actually on the profile line are giving me values such as PC: 0+668.62 when it should read 21+93.63.
I can't seem to find a correlation in the two numbers and am having difficulty changing the style to correctly reflect the stationing.
I have a feature line, and a labels table created for it. The table has the following columns: Line or Curve #, Station, Segment Start X, Segment Start Y, Segment Start X, Bearing/Delta, Length, Radius, Grade Ahead.
what code I need for the table to display the station of the feature line at the start of the segment?
I also have an alignment with the same stationing over top of the feature line, but Im not sure how to code a reference text into the table either. I can create an end segment reference text for the plan view labels but even if I copy that code into the labels table it doesn't work.
I can label the superimposed profile but c3d uses the stations of main profile of profile view.
Thinking on the future.... c3D can have the ability of use superelevation values to calculate the right values of superimposed profiles ?
how to update the information? I revised the pipe alignment but the profile did not update the station. WHat steps do I need to perform?
View 1 Replies View RelatedI got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
I want to start AutoCAD LT without the empty drawing. Just AutoCAD and the welcome screen. How can i do that? I always close the first drawing and begin a new one by choosing out of several templates or start with an existing drawing, rename and modify it. For NEW or OPEN i like to use the welcome screen.
View 3 Replies View RelatedI have a VB .NET Dll that add a new ribbon in AUTOCAD.When I load this dll from AUTOCAD, this new ribbon is well added.I'm trying to start this dll with AUTOCAD Start.
I've tried to load the DLL from the acad.lsp but the DLL is loaded before AUTOCAD load the ribbon, then the dll is well loaded but my new ribbon is not displayed !.
primere pro will not start... appliction unable to start correctly 0xc000007b
View 1 Replies View RelatedFirst - the alignment station label text size when viewed in model space is fine but when viewed in paper space it comes in way to big. How do i adjust this so i see things in paper space as they are in the model?
Second - Would like to adjust the station label style from the defalt 0+00.00 to 0+000.000
ACAD 2009 on XP
Third party software installed which now causes AutoCAD 2009 to crash when a single key is pressed. We have uninstalled the software, however the editor is still looking for the
Non-existent ARX. This is the problem. What file or registry key declares the list as shown in APPLOAD? I have verified 2009 works in the administrator profile.
We also did a repair and then a reinstall of 2009 to no avail. What steps are needed for AutoCAD to build a profile when a previous profile existed?
I just installed 3DS Max 2012 with a student license, but I encountered a problem that doesn't seem to go away. Whenever I open it, it gets to the "Starting 3DS Max 2012" screen and then freezes. The process freezes as well. Is there a way I can fix this? I have Windows 7 Ultimate, 32-Bit, and a Dual-Core Processor. My computer meets all the System Requirements except an insufficient video card.
View 4 Replies View RelatedI have two different label styles set up under Profile > Label Styles > Major Station.
I would like to have one of these labels applied to tangents in my profile and a the other one to curves.
how to set-up a style what i want to do is label the station and offset of the insertion point of a block by selecting that block and placing the name of the block at the end of the label. as such it would read sta: 14+58.25 - L12.50' P Pole
View 3 Replies View RelatedI am having a problem where my station labels are the correct size in model space, but when I switch to paper space they stay really small. I think it is a mm/m problem but can't seem to find a solution in the properties of the station label group. If I type a piece of mtext it works fine.
View 4 Replies View RelatedI am trying to do centerline stationing but the texts are coming out too small and the tick marks are not showing up.
View 2 Replies View RelatedI have an alignment and have station labels. The alignment is labeled with "Major Stations" at every 100 feet. I need to change the station increment to 25 feet and have labels. I have done this although station 1+25 is still reading 1, station 1+50 is reading 1, etc. There is a precision variable somewhere, and I can't figure it out. I have played with the alignment labels style but no luck. Is there a global drawing settings somewhere that might be controlling this?
View 2 Replies View RelatedI have a problem with some station labels I have, when I open the drawing(s) the labels display ??? instead of the station. After I manually sync the alignment in prospector, the drawing switches to the model tab with the ? now showing correctly.
View 2 Replies View RelatedIm trying to make a label that will call out pipe replacement in reference to an alignment. I know how to call out from multiple alignments, but I need multiple stations from the same alignment, such as sta xxx to sta xxx.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
I have an alignment that starts at station 1+00 and runs through 20+00.
By right clicking the station labels and editing the label group, I have updated my major station increments to 200' and my minor stations (ticks only) to 100'. The problem is, I want the 200' increments to begin at my starting station (1+00), so that the labels would read 1+00, 3+00, 5+00, etc.
As it is now, the above settings make my labels read: 1+00, 2+00, 4+00, 6+00, etc.
When I am in the file with the labels everything is the proper size. When I reference this file into my sheet file everything becomes tiny. Any legitimate solution?
View 9 Replies View RelatedJust installed Adobe Master CS6 on new installation of OSX Mountain Lion. Installation is ok but when i start Photoshop the color profile of monitor change (become more "cold").
View 3 Replies View RelatedI am trying to edit labels for a particular alignment. All labels are along the same alignment and use the same alignment style. I need to change "defl." in each of those labels to "defl:". So simply changing the period to a colon. But it is a lot of work to go through each label and then in edit label text and then change it. Plus, I have to do this on 12 sheets. That's like 300 labels! Is there a quick way to achieve this. If it were simple mtext or dtext then I could use the find and replace option, but these are civil 3d alignment station offset labels? Is there a lisp that can accomplish this task? I am using Civil 3D 2010.
View 3 Replies View RelatedNew to civil 3d...I have a series of bore locations along an alignment that I need the station offset and distance. I tried POINT -> ALIGNMENT: STATION/OFFSET, and that prompts me to tell where i want the offsets to go. I want to be able to pick the center of each bore and have civil 3d tell me that information. What command do I use?
View 4 Replies View RelatedIs it possible to add a prefix to an alignment station label (ex. A 100+00.00 or B 100+00.00) in Civil 3D 2010 or later?
View 5 Replies View RelatedIs there a way to label or list a station at a specific elevation? I know how to list and label an elevation at a given station but I need to know where a specific (given) elevation is located on an alignment or profile. I don't care if this is listed or labeled on the alignment or profile, I just need to be able to get a station at a given elevation.
View 5 Replies View RelatedI would like to change the station label format from 00+000.000 to 00,0+00.000
To move the + is easy, but how can I add the ,?
This type of station label is the standard by the Deutsche Bahn, so it's not that far-fetched.
Win7 64bit
HP z400 Workstation
ATI FirePro V4800
C3D2013
