I have a VB .NET Dll that add a new ribbon in AUTOCAD.When I load this dll from AUTOCAD, this new ribbon is well added.I'm trying to start this dll with AUTOCAD Start.
I've tried to load the DLL from the acad.lsp but the DLL is loaded before AUTOCAD load the ribbon, then the dll is well loaded but my new ribbon is not displayed !.
A blank Ribbon palette opens when I start up AutoCAD. It loads my custom workspace, but it also loads a ribbon palette each time aswell.
I'm using AUTOCAD Map3D 2013 Service pack 2.1
I'm sure there is a patch for this out there by now, I mean there has to be, I mean, why would Auto desk NOT want to fix this problem.
I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies View RelatedI got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
I want to start AutoCAD LT without the empty drawing. Just AutoCAD and the welcome screen. How can i do that? I always close the first drawing and begin a new one by choosing out of several templates or start with an existing drawing, rename and modify it. For NEW or OPEN i like to use the welcome screen.
View 3 Replies View Relatedprimere pro will not start... appliction unable to start correctly 0xc000007b
View 1 Replies View RelatedI just installed 3DS Max 2012 with a student license, but I encountered a problem that doesn't seem to go away. Whenever I open it, it gets to the "Starting 3DS Max 2012" screen and then freezes. The process freezes as well. Is there a way I can fix this? I have Windows 7 Ultimate, 32-Bit, and a Dual-Core Processor. My computer meets all the System Requirements except an insufficient video card.
View 4 Replies View RelatedThe icon dispayed on the ribbon for my addin seems to be the large (32x32) icon and i'm not sure how to fix that.
In IV2012 it was fine and i can't find anything in the programming that suggests anything was changed.
Using IV2014 Pro SP1 update 1, Win7-64bit
Is there an easy way to ensure the Vault ribbon/addin loads within Inventor 2011?
AutoCADM 2011 SP2
XP 32-Bit SP3
I have .Net Framework 3.5 and AutoCAD2010. but my WPF applicatin do not start. I can do prog by .dll , but don't know how about WPF in AutoCAD.
What should I do ?
ACA & MEP won't srart. They both load all the modules, but then it just says loading and hangs there. If I push the Escape key then both will load. Scratching head??? I've done a repaire and a reinstall on both, but to no avail. BTW, they both did work, untill a couple a days ago. Uninstall then reinstall??
View 1 Replies View RelatedHow can I start up AutoCAD and not have a blank drawing show up?
I work the majority of the time with existing drawings and I am tired of closing Drawing1.dwg every time.
I looked for a command line switch for the shortcut icon, but, no joy.
I'm facing an issue when I start up the AUTOCAD 2013 on Windows.
I clicked on Autocad icon, and a message is prompted saying "Unknown Property" with a yellow triangle with an exclamation mark inside it, and the software do not start up.
The highlights: Yesterday the software was working normaly when happened a black out. I started the computer again and keep working without any issue. Today when I would keep working on the project I couldn't start up the Autocad.
I may have no prior experience of autocad, but I'm pretty sure what it is doing isn't quite right. When clicking on the IPub icon, then 'New', an options window titled 'Insert...' opens. If I click on the 'New' button the same thing happens. If I click on 'Insert Model', I get the same dialogue window. I have started following a tutorial and I cannot get the 'New' > file types window that the video author gets.
I did a reinstall (not an uninstall > reinstall) and the problem persisists. It is the 2013 version on an education license.
I tried to set Polyline.StartPoint to new position (Point3d):
Polyline.StartPoint = myNewPoint3d;
I have "not implemented" exception.
Also, I tried to do it as:
var seg0 = acEnt.GetLineSegmentAt(0);
seg0.Set(newPoint3d(0, 0, 0), seg0.EndPoint);
It doesn't work also. I can do it as:
acEnt.SetPointAt(0, my2dPoint);
But it's 2D point, not 3d
Of course I can remove polyline and create it again, but. How to set start point correctly for 3d point?
After installing autocad 2011 on one of our users workstation. we try to launch it and it crashes will opening.
View 9 Replies View RelatedUsing VB.net to run a standalone program that launches Inventor at the beginning. I have recently moved the program to a new computer, and all of the sudden I am getting these errors. The message box below the program reads "A first chance exception of type 'System.Runtime.Interopservices.ComExceptopn' occured in mscorlib.dll.
I turned on the exception break command when those kinds of errors occured, and it stopped on the first line of the startup of Inventor code.I have added my reference to the autodesk.inventor.interop.dll already.
scince I installed AutoCAD Map 3D 2014 my Laptop is starting very slow. I have a Thinkpad W530 with a 500GB SSD, so the start up should be really fast. But scince i have AutoCAD the laptop needs about 10 to 15 minutes bevore i can open any programm. (as the lenovo update center says i have the latest drivers)
My girlfriend who has a Dell Inspiron laptop (with a normal HDD) has the same problem scince she installed autoCAD.
I recently just installed Autocad 2012, using a student licence obtained from the autodesk website. I entered my serial number and product key, and it said that it was suceesfully installed. It even launched, however now when I launch Autocad 2012 the start up screen appears, it says its initialzing, it loads then nothing appears on my screen or even my taskbar, I'm running Windows 7 professional 32 bit.
View 9 Replies View Related1) To do volume calculations do you have to insert the second surface into the first before you start?
2) When I am inserting the second file there is an error message that points of the same number has been found. This I believe is because all points start from 1 onwards. Is that the problem?
I just installed AUTOCAD 2013 on my computer. Every morning when I start up, I have to reload by CUI file. My ribbons are rearranged, I have to arrange them back to how I had them. Why is this happening?
View 4 Replies View RelatedI draw a pline. It asks me for the start point. I type in INT. I used to get this 'x' when I was near the intersection. That is now gone. It will still go to the intersection, but I really want my 'x' back.
View 9 Replies View RelatedIs there a way to start a custom line type so that is starts and ends with "O". Right now, the default "FENCELINE1" has circles in it, but it starts and ends with a line.
Here's their code for the line:
*FENCELINE1,Fenceline circle ----0-----0----0-----0----0-----0--
A,.25,-.1,[CIRC1,ltypeshp.shx,x=-.1,s=.1],-.1,1
I already tried just putting the O's at the ends, and that didn't do it.
Below is a picture of what I'm looking to get. The top one is the FENCELINE1, the bottom one is just circles and lines, but that's how I want the linetype to look when they place it... so first click would have a circle, second click would have a circle, and the circles "in" the line would spread out evenly.
Just so you know... this is for guardrail inside a where house where it has the circle pillars on each end with circular pillars in the middle (every 8', but the spacing isn't crucial).
This crashing of ACA 2014 on start-up is getting old.
A few times we thought we had it fixed only to have it return with a vengeance.
Seems to crash after loading Project Navigator files. Error log attached.
Anyway, I have an .idw series of drawings that i want to start at sheet #13. How? It is a clients title block and the format is "sheet 1 of 8, sheet 2 of 8, etc." so I need sheet 13 of 26, etc..
View 1 Replies View RelatedOur company is using 2012Lt and has a couple (3) regular templates we use. The problem is I have to keep going back to the templates and clean them out (txt styles, layers, etc) and what I suspect is happening is that someone starts a new dwg does some work and the auto save kicks in before they "save as".
Question, is there a way to force someone to "Save As' immediately after they start a new dwg?
recently our Autocad LT 2013 has started giving out the "The application was unable to start correctly (0xc00007b)" error randomly on program launch. Thinking SP2 would fix it, i tried installing through autocad, but after it says transferring, nothing happens and everything closes and this box comes up. If I go and get the update package and install it manually, i get the same error. This machine is running windows 7 pro x64 and I have already tried a repair, and full uninstall/reinstall.
View 4 Replies View RelatedI am having problems with my drawing template, I can make changes no problem, but when I use the template to start a new idw file the changes are not in place.
For example; view preferences, I want to work in third angle, I have this selected on the template but each time I start a new idw I have to change it from 1st angle.
e.g. 2; sheet size, I changed it from text to a drawing property, but it doesn't change when I edit the sheet size.
I am looking at options to disable all functions during the start-up process when I netload “my.dll”. The only way I have found is by using the following
Dim BoolRes As Boolean
If BoolRes = False Then
Dim line As Line
line.ColorIndex = 1
End If
The action of trying to change a lines colour while it’s not open for write works perfectly. As in any of my functions after this process don’t load. Any better way than my above code?
Just last week I was working just fine. When trying to access the product today, as usual the A5 sized "Loading" starts but when the product is to appear it just shuts off. It is not indicating what the error is through a dialog box, hence, I am not sure what the problem may be.
I have check various discussion groups which say it may arise from FLEX related files or CascadeInfo.cas but nothing changed. I have also done an entire un installation of the product and Installed it from scratch. The problem persists.
PC Specs:
Intel Core i7-720QM processor
Windows 7 Home Premium N 64-bit
16GB DDR3
1280GB HDD
I want to start out with a new blank space, but when i click new, nothing happens, and i cant use any of the tools.
View 2 Replies View Related
