AutoCAD 2010 :: Error With Product During Start Up
Mar 13, 2012
Just last week I was working just fine. When trying to access the product today, as usual the A5 sized "Loading" starts but when the product is to appear it just shuts off. It is not indicating what the error is through a dialog box, hence, I am not sure what the problem may be.
I have check various discussion groups which say it may arise from FLEX related files or CascadeInfo.cas but nothing changed. I have also done an entire un installation of the product and Installed it from scratch. The problem persists.
PC Specs:
Intel Core i7-720QM processor
Windows 7 Home Premium N 64-bit
16GB DDR3
1280GB HDD
View 1 Replies
ADVERTISEMENT
Apr 20, 2012
Autocad 2010 won't start up on my new windows 7 64bit system. I keep getting error msg Error msg : 0XC0000076 when I try to lauch the program
View 1 Replies
View Related
Apr 26, 2008
This evening I switched on and tried to load PS2.
The following pop-up appeared.
'An error has been detected with a required application library and the product cannot continue. Please re install the application.'
I've deleted CS2 and re installed but with no success, just the same error.
View 16 Replies
View Related
Nov 27, 2012
I am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
View 2 Replies
View Related
Jan 2, 2011
When I try to open or create drawings in autocad (which i downloaded recently from the edu community) it gives me a warning which says "the drawing file being opened was not created by a product from an autodesk education suite. if you save this drawing it will always be plotted with the follow plot stamp: produced by an autodesk education program.it is recommended that you save this drawing with a different file name." but I have saved and resaved drawings, tried different extensions and still it won't plot or print without this plot stamp. What is most likely causing it and what can I do to remove it.
View 7 Replies
View Related
Dec 14, 2012
I've instslled CS4 but keep giving me error message ' licensing for this product has stopped working'Â Error 150:30
View 2 Replies
View Related
Sep 5, 2012
To update serial number it's in the abot dialog box. But how about product key? Is there a way to change it without reinstalling the product?
Â
Situation: Autodesk Revit MEP Suite 2013 to Autocad MEP 2013.
View 1 Replies
View Related
Aug 6, 2013
Thought I might upgrade my PS to CC under the discount for existing owners scheme However, it won't accept that I have a suitible product despite having CS5 on my system. It is not on my products list. Six others are just not my PS products.
Â
 Put in serial number - says it is already registered - I know that - just not associated with me I guess. Deactived PS and tried again - same.
View 3 Replies
View Related
Jan 4, 2013
I have a user with AutoCAD 2013 installed on his work laptop. It is a Dell with Windows 7 64-bit. We don't have local IT any more and he was having problems with the computer, which is only 6 months old, so he had to send it from Michigan to Massachusettes, where our Global IT resides.
They "Imaged" the hard drive, installed a new hard drive and put the "Image" on the new hard drive. and sent it back without making sure things worked.
Now when he starts AutoCAD 2013 (vanillia), the Splash screen comes up and then he gets a Fatal Error. I have attached a capture of the error.
When he first got it back there were no drivers installed for his nVidia Quadro 1000M card, so he could not use his 2nd monitor. He found the driver and installed it and now he can use the 2nd monitor, but still had the problem with AutoCAD.
View 3 Replies
View Related
Apr 15, 2013
I have Autodesk Design Academy 2013 installed on a lab of computers in my domain. Students have been successfully using Inventor 2013 so far this year, and now they are trying to use AutoCAD 2013 and Mechanical 2013 but are encountering an error. When trying to start either of these programs, an MSI installer starts (I suppose for user-specific files) and then the message box below pops up:
After closing out the error boxes, the programs simply do not start. The domain users have their personal folders redirected from a network share, which is listed in the error box. Why these MSIs can't access the network location, I don't know, because the user logged in has full permissions on their own folder, and they can indeed access their folder from these computers. When I log in to the computer with a local administrative account, the programs work without error. how can I get around this so my users can actually use the software? Is there a registry key I can change to point to the local drive instead of their personal folders?Â
View 3 Replies
View Related
Oct 15, 2011
I am running acad lt 2012 on windows 7- at acad startup I am receiving a fatal error message
"unhandled access violation reading 0x008 exception at 4135104h"
Windows updates are all current.
View 1 Replies
View Related
Mar 3, 2013
AutoCad LT2009 has been running on my windows 7 computer for 3 years but now I get the message "The application was unable to start correctly(0xc0150002). Click OK to close the application."Â I have Google surched the application error message and found one reference to a similar but different numbered message for AutoCad LT which suggested down loading Microsoft Visual C==2010 Redistributable package (x86)Â and (x64) but neither of them worked.
View 3 Replies
View Related
Apr 27, 2013
When I start the subject application, I experience delay in opening the program & error as attached appars on sreen.
View 1 Replies
View Related
Feb 9, 2011
After installing autocad 2011 on one of our users workstation. we try to launch it and it crashes will opening.
View 9 Replies
View Related
Apr 21, 2012
I recently just installed Autocad 2012, using a student licence obtained from the autodesk website. I entered my serial number and product key, and it said that it was suceesfully installed. It even launched, however now when I launch Autocad 2012 the start up screen appears, it says its initialzing, it loads then nothing appears on my screen or even my taskbar, I'm running Windows 7 professional 32 bit.
View 9 Replies
View Related
Oct 2, 2012
I'm having a constant problem with Autocad 2010LT crashing on startup. After clicking on the AutocadLT 2010 icon the program starts to run, I see the start-up screen, and then everything disappears without any notice or error message. Â
I have installed service Updates 1 and 2 as well as the "Startup Error and Text Editing Hotfix". Nothing that I have read on the forums seems to fix the problem. I'm running Windows 7 Professional (64-bit). I should also mention that I have been running this version of the software on this computer without any issues for over 1 year before encoutering this problem.
View 3 Replies
View Related
Mar 10, 2012
I have AutoCAD 2012 on a Win 7 64bit laptop. Ive had it on here for over a year and never had this issue till today. My AutoCAD loads up fine and loads up the default Drawing1 file. However after waiting a few seconds and going to click File, it comes up with Not Responding on the top. I wait patiently for several minutes and it does not recover. Not quite sure what went wrong . My desktop has the same issue. There is a possibility of it being caused by CCleaner after using it to fix errors and it messed with something in the resgistry while doing so but not sure.
View 9 Replies
View Related
Oct 29, 2013
I know that I can find which points are which by checking the properties, but I am wondering if there is a way to (for example) edit the grips so that they indicate which end is which, like how they are used in dynamic blocks to show how an object can stretch. This isn't a problem that requires an imeediate fix, but would be nice if there were such an option.
View 4 Replies
View Related
Oct 30, 2013
cannot start photoshop error 213.5
View 1 Replies
View Related
May 27, 2013
I cannot get photoshop to start. I get error 148:3. I have restarted my computer & still get the error.
View 1 Replies
View Related
Jun 22, 2012
I created a linetype using text shape. Let’s say, that my line is only AAAAAA. Now when I apply this linetype in the drawing, the lines always have a small, line before and after the characters. Actually you see this: -AAAA- . How can I delete or hide the start and end lines.
View 2 Replies
View Related
Apr 18, 2012
I have configured a client workspace with a customised quick access toolbar and I am using acaddoc.lsp to ensure it is loaded when ACAD is fired up, the problem is, despite forcing the GUI to change wksps by:
(command "wscurrent" "Autocad classic")
(princ)
(command "wscurrent" "Barclays Net 2012")
(princ)
I can see the swap happening but the quick access bar is missing. If I manually select the current wksp from the switching tool it appears I don't even need to change to a different wksp and on restart it remains visible, it is only occurring on first use.
View 1 Replies
View Related
Jul 24, 2012
I can not get certain linetypes to start with the same dash length, see attached. The linetype will start with a longer dash then the stated length, depending on the length of the pline segment. Is there a way to fix this?
Here is the code for one of the linetypes highlighted:
*FENCELINEc,EX FENCE X---X---X---X---X---X---X--
A,.125,-.0625,.125,-.0625,.125,-.0625,.125,-.125,[FENCEx,FENCEx.shx,x=-.025,s=.1],-.0625
View 4 Replies
View Related
Sep 13, 2013
I keep getting error code 150:30 when I try to start Photoshop. I have system 10.8.4 and am running photoshop cs4.
View 1 Replies
View Related
May 19, 2012
When I open the program the start up loading image come up then an error box saying that an unspecified error has occur and I should contact customer support. What devices are involved and their mode of connection?: No devices really just trying to open the program on my laptop The Version of program is being used: x4 list all patches/updates that have been installed relating to that version of the program.: I just installed the 2nd patch after this started happening hoping it would fix it, I tried to install the first one but it didn't work. Details of the source files.: Not sure what this means? I don't really think it applies since its before I can even open projects
I use a windows 7 notebook, 4 gig of ram. This problem just popped up tonight, I am still able to open x3 on my computer though. When I did some lookin at the event logs, its showing that the problem file is the psiclient?
View 3 Replies
View Related
May 21, 2013
I had installed Corel Videostudio pro X5 on my laptop which has 64 bit WIN 8 and was working fine . Dues to system error which had nothing to do with the VS X5 , I had to reinstall Videostudio X5. Now it is crashing upon restart with some error that has to do with Changing the Environment (this error stays on for lass than one s second and closes itself so I cannot read complete error message)
View 1 Replies
View Related
Apr 11, 2009
I just got an HP pavilion d7 computer running Vista Home Premium (64) on a 2gb processor with 4gb RAM. I successfully installed CS3, entered the license code and activated the software, but when I try to run Photoshop CS3, I get the infamous Adobe Photoshop CS3 has stopped working properly error at the screen where it says it is building TWAIN menu items. I've tried the licensing update from Adobe with no success. I've tried running it as administrator, using the compatibility mode...no success. I'm at my wits end. Incidentally, I tried installing the PSE7 trial (because I was going to buy it next week) and that gives me the same error whenever I try to access the Editor.
View 9 Replies
View Related
Oct 21, 2008
Each time I start CS4 I get an error message "Could not load the Adjusted Refresh module because it does not work with this version of Photoshop". There is no option not to show the message in future, and I cannot find where to disable the module.
I am running a CS4 upgrade from CS.
View 3 Replies
View Related
Jun 3, 2012
LIghtroom 3.6 won't start and get the following error message "Lightroom - Opening Catalog: untitled (27 0f 42).jpg.lrcat."
Â
I have uninstalled Lightroom and re-installed and still get the same error.
View 1 Replies
View Related
Oct 13, 2013
I try to start msaccess in runtime mode, but an .accdr will not start.this is the code try to use, without /runtime in the code the .mdb and .accdb works great
(startapp "C:\Program Files (x86)\Microsoft Office\Office14\MSACCESS.EXE" /runtime path)
View 9 Replies
View Related
Nov 10, 2012
Just installed Adobe Master CS6 on new installation of OSX Mountain Lion. Installation is ok but when i start Photoshop the color profile of monitor change (become more "cold").
View 3 Replies
View Related
