AutoCAD 2010 :: Won't Start Up On Windows 7 64-bit Error Message - 0XC0000076
Apr 20, 2012Autocad 2010 won't start up on my new windows 7 64bit system. I keep getting error msg Error msg : 0XC0000076 when I try to lauch the program
View 1 RepliesAutocad 2010 won't start up on my new windows 7 64bit system. I keep getting error msg Error msg : 0XC0000076 when I try to lauch the program
View 1 RepliesI am running acad lt 2012 on windows 7- at acad startup I am receiving a fatal error message
"unhandled access violation reading 0x008 exception at 4135104h"
Windows updates are all current.
Each time I start CS4 I get an error message "Could not load the Adjusted Refresh module because it does not work with this version of Photoshop". There is no option not to show the message in future, and I cannot find where to disable the module.
I am running a CS4 upgrade from CS.
LIghtroom 3.6 won't start and get the following error message "Lightroom - Opening Catalog: untitled (27 0f 42).jpg.lrcat."
I have uninstalled Lightroom and re-installed and still get the same error.
Just got my Designer pro X CD in the mail, installed but Xara won't start I get an error message at start up." This application requires CPU support for SSE2 but this CPU dose not support it. "I am on Windows XP, AMD XP 2800, 2GB Ram.
View 9 Replies View RelatedI cannot get PaintShop Photo Pro X3 NL to start up anymore. Windows Task Manager shows PSP to have started up - as a service only. In the meanwhile, I do get this error message:
[Webbrowser:]
["Cannot find ...:/Users/Kanis/AppData/Roaming//Corel/Messages/540229901_907002/EN/MessageCache...
Check path of the internet address."]
(I'm running my PC in Dutch; so I translated it as correctly as possible).
This message appears from the very instant that I installed Corel WordPerfect X5 on my system, i.e. February 8, 2011. Then I uninstalled WP X5 completely. However, the above message keeps appearing, whenever I try to start Corel PaintShop Photo Project Creator or PSP X3.
In order to keep on going, I installed PSP X3 on a virtual machine on this PC (O/S: Windows XP 32 bits SP3 under VMware Workstation 7.1.4 ( under host W7 Ultimate 64 NL)). It works fine from the beginning, but this is not meant to be. Therefore, on June 6, I tried a fresh reinstall on PSP X3 on the main operating system (W7 Ultimate 64 NL). The problem persisted, as before. I then uninstalled ALL Corel applications from that system, went through the entire register and deleted all traces of Corel, PSP X3 and WP X5 applications. Expelled also all traces of PSI-Service related items (also from the register). Then I made a fresh reinstall of PSP X3, and it worked. Eureka ? Until this very morning. Same old story started all over again. So obviously I have not found the root of the problem. It must have been masked for some time. What is the source of the error message? And how come it causes PSP X3 to start as a service only, and not continue. Note: note even the start-up screen of PSP X3 does show up.
'The application was unable to start correctly (0xc000007b). Click OK to close the application.'I receive the error whenever turning on my laptop, and have ever since installing Lightroom4
View 1 Replies View RelatedWhen I try to start the CC in 64 bit mode I get the error 0x0000005. (in 32 bit there is no problem)
I'm using Windows 7, 64 bit and have been using other Photoshop versions without any problem. My current version of Photoshop is CS6. I've updated the Nvidia driver and that didn't work.
I have run LR 3 for some time and it has worked well. I have been away and when I now wish to run the program I get an error from Microsoft C++ runtime library saying that the program has requested to terminate in an unusual way. Re-installing LR has not solved the problem
View 4 Replies View RelatedJust last week I was working just fine. When trying to access the product today, as usual the A5 sized "Loading" starts but when the product is to appear it just shuts off. It is not indicating what the error is through a dialog box, hence, I am not sure what the problem may be.
I have check various discussion groups which say it may arise from FLEX related files or CascadeInfo.cas but nothing changed. I have also done an entire un installation of the product and Installed it from scratch. The problem persists.
PC Specs:
Intel Core i7-720QM processor
Windows 7 Home Premium N 64-bit
16GB DDR3
1280GB HDD
How to fix this error message in Windows XP service Pack 3?
It does not allow me to use my Corel 13 and causes problems in Corel 8.I've already unchecked the Install files for Asian languages, but to no avail.
I'm trying to render a large drawing and I keep getting this error message:
"The Scene Cannot Be Rendered. The Scene Must Contain At Least One 3D Wireframe or Solid Model Object To Render"
Other, similar drawings do not get this error message and i cant figure out what is causing it.
Opening AutoCAD LT this morning no problem. Closed it down and then opened it up again about 10 to 15mins later and get this message (see attached pdf).
Windows XP.
I've been getting this fatal error message upon opening files.
It seems to be as I try to load x-ref's.
I have run into a problem with AutoCAD 2010 while trying to copy paste within 2 different drawings. Copying blocks from 1 sheet to another causes this error message "_pasteclip *Invalid*" It wont let me copy in the blocks. Sometimes after that happens all i need to do is a regen command and it fixes it. Other times im forced to switch to model space and then back to paperspace which then lets me paste the objects. This is not isolated to my computer, it happens on other computers here in the office.
View 2 Replies View Relatedi am getting a fatal error message when i try to open a file, any file. the message is unhandled c0000417h exception at 71a252c0h
View 1 Replies View RelatedI have a user that experiences randon fatal error messages when opening drawings from ProjectWise and also from a local server see below:
fatal error unhandled e06d7363h exception at fe0ccacdh
Ihave windows 8 consumer preview and i installed autocad 2012 but when i open autocad 2012, ribbon dont appear, when i write the command ribbon but appear a message like this " Unhandled exception has ocurred in a component in your application. If you click continue, the application will ignore this error anda attempt to continue.
Common Languaje Runtime detected an invalid program"
In Attachment , i put the image of the problem....
I am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
View 2 Replies View RelatedEvery so often - about once in 12-15 cold starts - as the boot cycle closes, I get a message box saying a specific vs.......exe file did not start. The message box is as follows:
View 3 Replies View RelatedI get a message saying "Application unable to start (0xc000007b)
View 2 Replies View RelatedIn Elements 9 I now get an error message "Cannot use Clone Stamp due to program error".
View 1 Replies View Related have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.
I have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies View RelatedI have a user with AutoCAD 2013 installed on his work laptop. It is a Dell with Windows 7 64-bit. We don't have local IT any more and he was having problems with the computer, which is only 6 months old, so he had to send it from Michigan to Massachusettes, where our Global IT resides.
They "Imaged" the hard drive, installed a new hard drive and put the "Image" on the new hard drive. and sent it back without making sure things worked.
Now when he starts AutoCAD 2013 (vanillia), the Splash screen comes up and then he gets a Fatal Error. I have attached a capture of the error.
When he first got it back there were no drivers installed for his nVidia Quadro 1000M card, so he could not use his 2nd monitor. He found the driver and installed it and now he can use the 2nd monitor, but still had the problem with AutoCAD.
When I start PS CS3, by initializing the pallets ("Paletten werden initialisiert" (German message) the window closed and does nothing more.
After uninstalling and new installation the same happened.
What can I do?
Is there an uninstalling tool from adobe, which removes all registry keys?
I'm using AutoCAD 2012 LT and have having problems inserting/updating/editing fields. This is the error that appears
"There are no registered modules to edit fields or demand loading is currently disabled". When I click OK the Field pop-up appears empty! (see attached)
The BEDIT command is also not working. It was all working up until a few days ago! I have downloaded the most recent Service Pack and it's still not working.
A user is having issues with plotting from AutoCAD LT, when trying attempting a normal plot to PDF the program crashes and he is forced to close it, also when changing the way he plots to plot to DWG PDF it starts to work correctly but brings up a fatal error message as below and attached:
FATAL ERROR: Unhandled Access Violation Writing 0x0014 Exception at 778e224dh
When i try to convert my .dwg to a pdf on my laptop (second computer) i get an error message that the drawing might be password protected. it happens on all my autocad drawings
View 3 Replies View RelatedEvery time I try and plot a drawing I get this error message:
' YOU CAN NOT USE MULTIPLE INSTANCES AT THE SAME TIME'. The program then freezes for a short while then returns a message saying plot canceled.
I am using Map 3D 2011. Although I did have a trial version of AutoCad 2012 I had no problems plotting on both versions up until recently I have made no changes to any printer configuration, plot files or styles. I removed 2012 after I started getting this message but still I am unable to plot.
i'm working with this dwg that has a block in it that says "cannot be exploded" every time i try to explode it. is there anyway i can still get this thing exploded?
View 2 Replies View Related