Paint Shop Pro :: X3 Won't Start Up And Induces Old WP Error Message
Jun 21, 2011
I cannot get PaintShop Photo Pro X3 NL to start up anymore. Windows Task Manager shows PSP to have started up - as a service only. In the meanwhile, I do get this error message:
[Webbrowser:]
["Cannot find ...:/Users/Kanis/AppData/Roaming//Corel/Messages/540229901_907002/EN/MessageCache...
Check path of the internet address."]
(I'm running my PC in Dutch; so I translated it as correctly as possible).
This message appears from the very instant that I installed Corel WordPerfect X5 on my system, i.e. February 8, 2011. Then I uninstalled WP X5 completely. However, the above message keeps appearing, whenever I try to start Corel PaintShop Photo Project Creator or PSP X3.
In order to keep on going, I installed PSP X3 on a virtual machine on this PC (O/S: Windows XP 32 bits SP3 under VMware Workstation 7.1.4 ( under host W7 Ultimate 64 NL)). It works fine from the beginning, but this is not meant to be. Therefore, on June 6, I tried a fresh reinstall on PSP X3 on the main operating system (W7 Ultimate 64 NL). The problem persisted, as before. I then uninstalled ALL Corel applications from that system, went through the entire register and deleted all traces of Corel, PSP X3 and WP X5 applications. Expelled also all traces of PSI-Service related items (also from the register). Then I made a fresh reinstall of PSP X3, and it worked. Eureka ? Until this very morning. Same old story started all over again. So obviously I have not found the root of the problem. It must have been masked for some time. What is the source of the error message? And how come it causes PSP X3 to start as a service only, and not continue. Note: note even the start-up screen of PSP X3 does show up.
View 2 Replies
ADVERTISEMENT
Sep 3, 2011
I have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies
View Related
May 29, 2011
I installed PSP X3 trial version to see if I actually wanted to buy it, but after installing it, I keep getting Not Responding when I try to open the program.I am running out of time on my trial time.
PS: I have the same problem with XI, so I reverted back to Jasc PSP9.
View 7 Replies
View Related
Oct 21, 2008
Each time I start CS4 I get an error message "Could not load the Adjusted Refresh module because it does not work with this version of Photoshop". There is no option not to show the message in future, and I cannot find where to disable the module.
I am running a CS4 upgrade from CS.
View 3 Replies
View Related
Jun 3, 2012
LIghtroom 3.6 won't start and get the following error message "Lightroom - Opening Catalog: untitled (27 0f 42).jpg.lrcat."
I have uninstalled Lightroom and re-installed and still get the same error.
View 1 Replies
View Related
Jul 21, 2012
Just got my Designer pro X CD in the mail, installed but Xara won't start I get an error message at start up." This application requires CPU support for SSE2 but this CPU dose not support it. "I am on Windows XP, AMD XP 2800, 2GB Ram.
View 9 Replies
View Related
Apr 20, 2012
Autocad 2010 won't start up on my new windows 7 64bit system. I keep getting error msg Error msg : 0XC0000076 when I try to lauch the program
View 1 Replies
View Related
Oct 15, 2011
I am running acad lt 2012 on windows 7- at acad startup I am receiving a fatal error message
"unhandled access violation reading 0x008 exception at 4135104h"
Windows updates are all current.
View 1 Replies
View Related
Jun 8, 2013
'The application was unable to start correctly (0xc000007b). Click OK to close the application.'I receive the error whenever turning on my laptop, and have ever since installing Lightroom4
View 1 Replies
View Related
Jan 27, 2013
I am running Windows 7 SP1. I have tried uninstalling using Revo Uninstaller, twice. I have also tried opening it by using the shift key which did reset the preferences but still won't open. I have turned off DEP svs for it.I have tried just about everything and I am very upset.
View 7 Replies
View Related
Dec 6, 2012
After Installing Sp3 PSP X4 does not start. I only get Error message:
Error: Versions must match.
Master = 14.2.0.1
RC = 14.3.0.1
I tried to install it also on a Windows 7 computer with same result.What to do?
View 14 Replies
View Related
Jun 11, 2011
PaintShop Photo Pro X3 - downloaded version. System: Windows 7 Professional.
When I try to run the downloaded file, "PSPP_X3_Ult_PF.exe", logged in as an Administrator, the following message pops up and the installation stops.
PPP3 installation error message.jpg (21.6 KiB) Viewed 734 times
View 2 Replies
View Related
Sep 1, 2012
Clicking on the desktop icon provided by the install of Pspx4 has the splash image appear briefly then a 'not going to do it' message box followed by Win7 'there is a problem, progam is being closed' message box.Created my own shortcut from the Pspx4 exe and the same thing happened.Using the listing in the Start Menu 'All Programs' will start PspX4.
There is no problem exporting an image from Lightroom 4 to be opened in Pspx4. That happens without fault.I applied 'run as administrator' to the shortcut I created and now that will open the software as expected.
View 1 Replies
View Related
Jun 30, 2011
As some know, it comes on the installation CD of PSPX3.
Quite simply, three seconds after double clicking the program icon, I get this. I'm on the second installation. Patches won't install. I get the message " product that needs to be updated not found" or something similar.
View 14 Replies
View Related
Feb 8, 2011
I installed a new harddrive on my laptop and restored a Ghost image of my old drive onto the new one. Most of the installed software worked right off. Some needed to be re-activated as the software detected a significant hardware change. However, PSP X3 would not start, crashing during loading. The PSP X. splash shows and the loading status gets to "initializing palettes" then Windows reports "Corel Paintshop Pro X3 has stopped working. Windows is checking for a solution...". That's it.
I have un-installed PSP X3 and reloaded from CD. I downloaded the 4 existing patches (1 through 4) and installed them in sequence. I didn't try starting PSP X3 until all the patches were in. Corel.com confirms the activation of the software.
I've used PaintShop since the JASC days and the software works great. However, since about version 9, the software has become more prone to crashing under a variety of circumstances. Now it won't start.
Specs
1.8 GHz laptop
3 GB RAM
500 GB Seagate Momentus XT drive with 4 GB RAM buffer (supposedly a "hybrid" drive)
Windows 7 Pro 64 bit
View 13 Replies
View Related
Nov 10, 2013
This is a strange thing : I have PSP X5 under my computer for about one year, and this morning it does not start when I click on PSP icon. When I look at the process monitoring, the exe appears and disappears 3 seconds later. I tried the restore database, nothing changed. I tried to rename the database file, no more success.
View 3 Replies
View Related
Dec 14, 2011
I am getting quite annoyed with COREL..Every time I open PSPX3U this message pops up clicking the box does nothing to prevent the message come up the next time I want to use PSPX3U.
View 2 Replies
View Related
Mar 16, 2012
Where do I switch off the irritating "You have selected more than 10 files .." messages? I can't find it in Preferences>General Preferences>Warnings
View 2 Replies
View Related
Sep 15, 2011
When I try to email an image from the trial version of PSP X4 I get the following error message:
"One or more unspecified errors occurred. No message sent."
The message comes up after the initial preparation of the image is completed and the program goes to link with the email (standard MS Mail in Vista).
View 13 Replies
View Related
Jul 25, 2013
Just recently, upon closing PSP x5, a message window pops up, the title area usually references using the e-learning center or "Explore more ways to learn and love photography", but the window itself is empty except for the message "Do not display this message again" with a checkbox and a Close button. The Close button does not work, nor does the red X close window button. I have to go into Task Manager to finish closing the program.
I'm on a Windows 8 machine and this just started happening after months of use.
View 11 Replies
View Related
Aug 16, 2013
Just got CS 6 (not extended) When I click Oil Paint Filter I get the following msg.
The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check manufacturer for the latest software.
Is it my graphics card. If so, how do I check to see what I have? I have an HP about three years old.
View 1 Replies
View Related
Mar 11, 2013
Trying to edit and save this file fails silently, because Photo-PAINT does get confused by a file name like this: "filename.morename.extension". Nothing gets saved.
The actual file name taken from my example file is: "Flag_of_Germany.svg.png".
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 6 Replies
View Related
Jun 29, 2011
I'm trying to scan a picture using a LEXMARK Platinum Pro905 all-in-one printer with PSP X3 (v. 13.2.1.20). Lexmarx drivers are the latest available.
Please note I'm using a French version of PSP so I'll try to translate the titles, menus and messages in English. I'm going in File > Import > From a scanner or a camera (3rd option)
A pop-up windows is opening with settings for scanning. I'm able to modify every option if I want to. If I click on "Preview" (with a document in the scanner), I'm getting a preview of the document. Using the preview, I can select the area of the document I want to scan. So far so good.
When I click on the "Scan" button, the pop-up with the scan setting is disappearing (which is probably normal) but a pop-up error message is displayed right away :
The French says "Une erreur s'est produite lors de la lecture du fichier".
In English, it would probably translate by "An error occurred while reading the file". The only choice I have is to click "Ok".
I also tried with another scanner (HP Scanjet Q4010) with same result. Both (Lexmark + HP) are using an USB connection. In the past (few months ago), I was able to scan a document using this method with my HP scanner and PSP X2.
View 7 Replies
View Related
Nov 29, 2011
repeat error each and every time I use any adjustment on graphics, photos or anything I am working on with PSP X3. Am including a screen shot, edited down to the forum specifics, and I had to edit the screen capture with PSP X2 since to reload PSP X3 will now require my restarting my computer.
I have used Paint Shop Pro since it's very first incarnation as a tiny program courtesy of the folks with Jasc, so this is not my first time using the product, just the absolute worst experience doing so.
No matter what the image, file type, or set-up, when I try to make adjustments (even if I make sure to stop and make double sure they are finished processing), eventually the program locks up and I get the error shown and stated.
View 3 Replies
View Related
Sep 10, 2012
It's been a few days now that when I try to save a picture (either with "save", "Save as", or "save copy"), I get the following message popping up:
"because of the limitations of the specified file format (and possibly the save options you've selected), the saved file will be limited to a merged image. Would you like to continue?"
I have hit ok to that and the software would save the picture, but when I checked the size of each picture I noticed a dramatic drop in size (from 6.5MB to roughly 1.3MB). Just for the record, the editing I did to these pictures was minimal, just a little rotation and a removal of maybe 2mm from each size.
First of all, is it normal to get this message?
And then, is such a drop in size normal?
it's pictures in JPEG taken from the camera and saved as JPEG.
View 3 Replies
View Related
Jul 20, 2010
I cannot seem to get the Help menu item to work at all. Every time I select Help -> Help Topics... I get a dialog box with the following error message: Web Works Help display fail! I've reinstalled PSP twice. And I downloaded the latest update.
View 13 Replies
View Related
Mar 5, 2013
I purchased PSP X4 Ultimate, a little over a year ago, and recently purchased a new computer. (I had purchased the software through the corel.com website digital download, so I downloaded the files directly from their site.) After installing it on my new computer I started getting the Authenticity can not be Verified Error.
View 3 Replies
View Related
Dec 19, 2011
I made some changes to a photo and when I went to save the changed photo(save as) in JPG format I get an error writing file to drive, no explanation and it wiped out my original photo on the drive.
View 2 Replies
View Related
Jan 29, 2012
Image with resolution larger than monitor size, view in PSP set to 1:1...Ctrl+Shft+A for full screen view.
PSP switches to full-screen with move (hand) tool present for moving around the image. However, when the move tool is used it behaves like the Esc key and defaults back to preview view within PSP.
View 1 Replies
View Related
Jul 10, 2012
My PSP X3 locked up and I had to use the Task Manager to close it due to "not responding." This has repeated each time I have tried to load the program, including trying the suggestion of pressing "Shift" and trying to launch the program on a reset. There's no error message, it doesn't get that far. The welcome screen loads, shows the program is updating the cache, etc. but then it goes to no response, no error message, just 100% locked up. Have to use the Task Manage every single time to get it to close.
Right before this happened yesterday, I also experienced difficulty copy and pasting one image or selection into another. No paste commands would appear. I tried doing the "clear" selection as posted online, but no real answer on that either.
short of uninstalling and going through all that crap again. I'd buy the latest version, but since I've had no end of problems with this version I am hesitant to move forward if there are more bugs.
View 5 Replies
View Related
May 17, 2013
I don't know if it is a bug, or something to do with Windows7 but it has been bugging me for quite a while.
On my old computer (which ran Windows XP), i could choose to open several images in PSP (all versions i had at the time) and the number of selected files didn`t seem to matter. Now, on my new computer (since a few years), i run with Windows7 and i find that if i select more than 4 files to open at once (usually jpg or png) i get an error message asking me to "select a valid file". If i deselect enough files to reach 4, it opens them fine.
It is not a big issue, although it might get a bit annoying if i have 20 small files to open at once, as i have to do it in groups of 4 at the time.
View 4 Replies
View Related
