Paint Shop Pro :: Error Saving In JPG Format
Dec 19, 2011
I made some changes to a photo and when I went to save the changed photo(save as) in JPG format I get an error writing file to drive, no explanation and it wiped out my original photo on the drive.
View 2 Replies
ADVERTISEMENT
Apr 2, 2013
How do you save an image to PDF format?
View 2 Replies
View Related
Nov 30, 2011
I'm still using PSP X3. What format more knowledgeable people for me use for editing images.
In the past, I'd take the jpeg produced by my camera, convert it to PSP format, and then when finally finished, save it as jpeg again.
I understand that the PSP format is no longer used, so should I just work in jpeg format? My understanding is that any intermediate saving would compromise image quality; if not jpeg, then what?
View 5 Replies
View Related
May 25, 2012
Have been running the trial version of Lightroom 3.6 for the past three weeks. I see that it cannot handle or display PNG format, of which I have over 11,000 images. PNG is my primary WORKING format for single layer images due to its lossless compression, support for EXIF data, and transparency later. Lightroom creates tens of thousands of tiny folders and catalog files that are difficult to defragment and greatly complicate my routine backups. I must comment that Adobe filters, especially Noise Reduction are really great but the lack of PNG support is a show stopper.
Also ran Lightroom Synchronize to add recent photos to the Canon folder and for some reason it changed the date stamp on over 3 GB of photos to the present day. When I went about a routine backup of the photos, the backup software wanted to completely overwright all the files with TODAYS date on the MyBook drive!! What? no way. So now I must RESTORE all these files BACK to the original date stamps. This is way over the top. Plus Lightroom is very slow to complete the Sync task, and might even take two passes.
View 1 Replies
View Related
Feb 2, 2013
I have lots of picture tubes from an old version of PSP. I now have PSP X5. What is the correct format for the pictures? I have both psp and tub.
View 2 Replies
View Related
Sep 3, 2011
I have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies
View Related
May 21, 2011
Recently I've started getting this error when I try to use the Organizer in version X2. Then PSP freezes. I am not being able to use the Organizer.
View 1 Replies
View Related
Sep 15, 2011
I tried save two bitmap layers with some mask in X4 in .pspimage and can not open it in X3...
View 2 Replies
View Related
Apr 9, 2012
I get the idea to save my processed RAW files in jp2 jpeg 2000 16 bit format(channel) so they need less space as RAW or tiff and can be later good modify without noticable quality loss. But i get the requester, that the format support only 24 bit ( 8 bit/channel)
jpeg 2000 is here since 10 years. Is it not possible that windows or other programs can read 16 bit /channel files, or whats the reason wy it is not possible in PSP X4 upd 1 to store such files ?
Does other programs too not support 16 bit /channel jpg ?
View 6 Replies
View Related
Nov 8, 2012
I manage a website and I have to resize bundles of images frequently. I find it a problem in Paint Shop Pro X5 that every time I resize an image it shows as a tiny thumbnail. This causes me to go to the 'view' toolbar and then from the dropdown box have to click 'zoom to 100%'
How do I format PSP X5 to automatically show resized images at 100%?
View 1 Replies
View Related
Feb 26, 2012
I created a work in PSP using raster + vector. The image is configured to A3 paper dimensions.
I want to send it to be printed in an external store. With CorelDraw, it is just sending the CDR file (with vector in curves) and the file by itself shows A3 paper dimensions when opened. So, the guy who will print just make the job, without any question!
It seems to me that files like PNG or JPG can’t be handled as CDR file by the person who will receive the file. So, what should be the better PaintShop file format to send to external store to be printed in the way I mentioned?
View 3 Replies
View Related
Oct 21, 2011
I can't see a way to search for this issue that seems faster then looking manually. X4 will open X3 jpg's, but not X3 TIF's. X4 will open the older PSP files, but X3 TIF's show up as black rectangles in X4 workspace and won't open. I've uninstalled X3 already, but do not consider re-installing it as a solution. Previous versions of PSP have been backward compatible for me. If I open a RAW file, edit it and save as a TIF, it will open.
View 3 Replies
View Related
Nov 4, 2013
I'm having a problem saving pen presets. I set the line style and stroke width, the foreground and background colors then save these as a preset. When I click on it to use it again later, everything comes back except the colors. Is this normal or am I missing something when I save the preset?
View 2 Replies
View Related
May 3, 2013
I have a .PSP file with several layers. I would like to save at once each layer as a different .PNG file. Is it possible?
I could set and save just visible layers one by one, but my point is to find some automation.
View 2 Replies
View Related
Jul 4, 2012
I have learned how to remove a background and how to save the resulting image as a PNG.
View 3 Replies
View Related
Apr 8, 2012
I've recently been looking for a cost effective image editor to use alongside Lightroom and have been considering PantShop Pro X4. I downloaded the trial version and it looks like it will provide most the functionality I have been looking for ie. layers support in 16 bit/channel. It also integrates quite nicely with Lightroom allowing the transfer of a image using .psd format retaining the 16 bit/channel during transfer and subsequent editing. Unfortunately when attempting to save back in .psd format it presents the message;
"Because of the requirements of the specified file format, the saved file will have a bit depth of 24 (16.7 million colors). Would you like to continue?"
As far as I am aware .psd doesn't inherently have this limitation so is this a licensing limitation, a coding limitation in PaintShop Pro X4, a bug or a lack of knowledge on my part and there is a way to do this? I like that the edited image could of course be exported as a PSPIMAGE file to retain the option of re-editing or as a tif file to allow importing back into Lightroom but if it exported the full bit depth to .psd it would nicely allow the full cycle out of and back into lightroom fairly seamlessly keeping the least amount of extra files.
View 3 Replies
View Related
Oct 16, 2011
I purchased PaintShop Pro X4 yesterday. So far, I am impressed with the speed boost gained but I have a BIG PROBLEM: I need to work with TIFF files but this version creates a two-pages TIFF file whenever you save one (they appear as a two-page tiff with some sort of thumbnail attached).
I have been tinkering with setup options but I have been unable to find anything relevant to this issue.
View 14 Replies
View Related
Aug 10, 2011
Not a big deal, but, when I'm saving a file in X3, there's no progress bar. Is there anything in Preferences that I can click to show the bar? I haven't been able to find anything. It would be nice, especially when saving large files.
View 2 Replies
View Related
Nov 15, 2013
Win 7 64 bit
PSP X5
i have just edited 70 photos using capture editing and apply editing, and have all of them stacked up on the screen.
Can I automatically save them all without having to save each one manually? I tried using the same method as above but it did not save them.
View 2 Replies
View Related
Sep 8, 2011
I have psp X3.I often need to cut images (and paste into another) using the background eraser tool and the eraser tool.How do I save the "worked on" image so I can use it again say, another day, for pasting without having to go over the same operation each time?
View 3 Replies
View Related
Apr 28, 2012
New to this forum and PSP (X4 Ultimate). Working on a raw file (dng) in the Edit tab, I make changes then save to a jpg in another folder. The next day I want to undo some of the changes so I edit the dng raw file again but all my previous changes are no longer available. Am I doing something wrong? Or are my previous changes just no longer available in the raw file? Doesn't PSP keep track of changes made to raw files so you can continue to evolve the image? As I said, I am new at PSP so I hope I'm just doing something wrong. I have used Lightroom for a while now but I really like what PSP can do and the speed to make changes , especially to portraits.
View 2 Replies
View Related
Jun 28, 2012
I purchased and installed version PSPX4 in Jan. 2012, and started noticing, what appears to be, a duplicate copy of the same file with an Asian type file format in the Recent Doc folder. When I attempt to do a weekly scan of my system for spyware, malware, etc. and weekly clean up of my registry, temp files and other files taking up space, one of my programs finds files listed in the registry under the Recent Doc folder that it cannot clean as the format is not recognized. Even though the properties of the file link the file back to the folder the .jpg file is stored in, there really isn't a file with that format. This is just a reference, and very annoying.
Recent Doc folder showing reference to a duplicate image after copy and pasting as a new image.
View 3 Replies
View Related
Jan 2, 2012
Programme: X4
System: Windows 7 Ultimute 64bit
Installed 01/01/2012 with SP1.
Problem: When I save jpeg files some of them become corrupt and will not open.
I have been using PSP for a number of years and decided to upgrade to X4, now a number of the files that I save in PSP are becoming corrupted and they seem to all be photos which are shot using a pure white background, not all photos are affected, I never had this problem in my previous versions of PSP
I use adobe lightroom which I transfer my raw file into jpeg, this is where i then open the jpeg in X4 and do my main editing, it is when I save the image it saves corrupted and can not be opened or deleted (shows that X4 is still using the file) . it will also not allow me to re transfer the image from my catalog.
There are some good features and I am considering uninstalling and reverting back to my older program (X2).
This may be an issue with the metadata of the image, I exported 2 sets of 50 identical images 50 with and 50 without the Metadata and ran a script which then automatically save the image, about 20 of the images with the metadata ended up corrupted, all the images without the metadata saved fine.
View 14 Replies
View Related
Nov 13, 2012
Is there a script for saving all open images? This would be very useful after running Joe Fromm's Layers-Delaminate script. I am using PSP x3.
View 10 Replies
View Related
Jun 1, 2013
PSPro X. After adding text to a jpeg image it becomes a vector object, what is the easiest way to save it as a jpeg file
View 7 Replies
View Related
Mar 29, 2013
Is is possible to save in multiple formats concurrently (CS4 & CS6)? Our images editors are having to "save as" .png and then again as .psd in order to complete their work. Clearly the overhead stacks up over time.
View 1 Replies
View Related
Aug 20, 2012
It seems I can either save work at a lower quality jpeg, or export to get higher quality and lose the EXIF. I never want to use the lower quality, never, but I cannot seem to find anything in the Preferences to avoid having to manually set the quality. Is there a way to save at a higher quality than currently provided by PSP X4 by default?
View 2 Replies
View Related
Nov 2, 2011
Confirm that the alpha channel is not saving correctly for TGA files using PSPro X4?
1 Create an image with an alpha channel.
2 Save image as a TGA.
3 Close and re-open the TGA then load a selection from alpha channel.
View 7 Replies
View Related
Mar 10, 2012
I use Paintshop Pro Photo XI. When opening my unedited picture in Irfanview I can read a long list of information under "EXIF", but as soon when I open the photo in Paintshop and save it a great part of the original EXIF information is "gone" and replaced by a very brief survey, including Paintshop information.
What can I do to preserve the original EXIF information?
View 6 Replies
View Related
Oct 7, 2012
I'm testing the new People tagging feature... organizing and searching seems to be no problem at all... My question though is whether this "tag" information is saved back to the actual files themselves, or whether it is kept separate in a corel database file??? i.e If I reformat my harddrive and then reimport my pictures, will the photos still have their tags!?!?! (photos area stored on a different networked drive)
The "date modified" data of the file has not changed after tagging... I only want to use this feature if the tags can be permanently written to the files.
View 7 Replies
View Related
Sep 14, 2012
I am trying to save a red and white and black logo to an eps file to use with a vinyl cutter but when it saves it changes it to a greyscale picture and the red color is removed. I tried resetting to factory settings and that didn't work.
View 2 Replies
View Related