As some know, it comes on the installation CD of PSPX3.
Quite simply, three seconds after double clicking the program icon, I get this. I'm on the second installation. Patches won't install. I get the message " product that needs to be updated not found" or something similar.
I installed a new harddrive on my laptop and restored a Ghost image of my old drive onto the new one. Most of the installed software worked right off. Some needed to be re-activated as the software detected a significant hardware change. However, PSP X3 would not start, crashing during loading. The PSP X. splash shows and the loading status gets to "initializing palettes" then Windows reports "Corel Paintshop Pro X3 has stopped working. Windows is checking for a solution...". That's it.
I have un-installed PSP X3 and reloaded from CD. I downloaded the 4 existing patches (1 through 4) and installed them in sequence. I didn't try starting PSP X3 until all the patches were in. Corel.com confirms the activation of the software.
I've used PaintShop since the JASC days and the software works great. However, since about version 9, the software has become more prone to crashing under a variety of circumstances. Now it won't start.
Specs
1.8 GHz laptop
3 GB RAM
500 GB Seagate Momentus XT drive with 4 GB RAM buffer (supposedly a "hybrid" drive)
Windows 7 Pro 64 bit
I am running Windows 7 SP1. I have tried uninstalling using Revo Uninstaller, twice. I have also tried opening it by using the shift key which did reset the preferences but still won't open. I have turned off DEP svs for it.I have tried just about everything and I am very upset.
View 7 Replies View RelatedAfter Installing Sp3 PSP X4 does not start. I only get Error message:
Error: Versions must match.
Master = 14.2.0.1
RC = 14.3.0.1
I tried to install it also on a Windows 7 computer with same result.What to do?
PaintShop Photo Pro X3 - downloaded version. System: Windows 7 Professional.
When I try to run the downloaded file, "PSPP_X3_Ult_PF.exe", logged in as an Administrator, the following message pops up and the installation stops.
PPP3 installation error message.jpg (21.6 KiB) Viewed 734 times
I cannot get PaintShop Photo Pro X3 NL to start up anymore. Windows Task Manager shows PSP to have started up - as a service only. In the meanwhile, I do get this error message:
[Webbrowser:]
["Cannot find ...:/Users/Kanis/AppData/Roaming//Corel/Messages/540229901_907002/EN/MessageCache...
Check path of the internet address."]
(I'm running my PC in Dutch; so I translated it as correctly as possible).
This message appears from the very instant that I installed Corel WordPerfect X5 on my system, i.e. February 8, 2011. Then I uninstalled WP X5 completely. However, the above message keeps appearing, whenever I try to start Corel PaintShop Photo Project Creator or PSP X3.
In order to keep on going, I installed PSP X3 on a virtual machine on this PC (O/S: Windows XP 32 bits SP3 under VMware Workstation 7.1.4 ( under host W7 Ultimate 64 NL)). It works fine from the beginning, but this is not meant to be. Therefore, on June 6, I tried a fresh reinstall on PSP X3 on the main operating system (W7 Ultimate 64 NL). The problem persisted, as before. I then uninstalled ALL Corel applications from that system, went through the entire register and deleted all traces of Corel, PSP X3 and WP X5 applications. Expelled also all traces of PSI-Service related items (also from the register). Then I made a fresh reinstall of PSP X3, and it worked. Eureka ? Until this very morning. Same old story started all over again. So obviously I have not found the root of the problem. It must have been masked for some time. What is the source of the error message? And how come it causes PSP X3 to start as a service only, and not continue. Note: note even the start-up screen of PSP X3 does show up.
Clicking on the desktop icon provided by the install of Pspx4 has the splash image appear briefly then a 'not going to do it' message box followed by Win7 'there is a problem, progam is being closed' message box.Created my own shortcut from the Pspx4 exe and the same thing happened.Using the listing in the Start Menu 'All Programs' will start PspX4.
There is no problem exporting an image from Lightroom 4 to be opened in Pspx4. That happens without fault.I applied 'run as administrator' to the shortcut I created and now that will open the software as expected.
This is a strange thing : I have PSP X5 under my computer for about one year, and this morning it does not start when I click on PSP icon. When I look at the process monitoring, the exe appears and disappears 3 seconds later. I tried the restore database, nothing changed. I tried to rename the database file, no more success.
View 3 Replies View RelatedPSPX6, both the x32 and the x64 versions crash when trying to open this file. It is a JPG that I found online.
View 5 Replies View RelatedNature of the problem - If you spend about a minute in the MANAGER tab PSP X6 will crash. I had the same problem with PSP X5.
Properties of your source files (format, file size, where did you get it?) - Any file, mainly Jpegs & TIFFs, original or from the web.
Error Codes -
LevelDate and TimeSourceEvent IDTask Category
Error9/25/2013 4:10:51 AMApplication Error1000(100)"Faulting application name: Corel PaintShop Pro.exe, version: 16.0.0.1, time stamp: 0x51db3b41
Faulting module name: AcLayers.DLL, version: 6.2.9200.16420, time stamp: 0x505aa251
Exception 0xc0000374
Fault offset: 0x0000000000006ad9
Faulting process id: 0x4730
Faulting application start time: 0x01ceb9c6aa155950
Faulting application path: C:Program FilesCorelCorel PaintShop Pro X6 (64-bit)Corel PaintShop Pro.exe
Faulting module path: C:windowsAppPatchAppPatch64AcLayers.DLL
Report Id: fdb46e28-25b9-11e3-bfaf-10604b5e0196
Faulting package full name:
Faulting package-relative application ID: "
PSP X3 crashes when starting up in WinXP Pro. It crashes at "Activating tracker", or something. PSP8 also crashes. I removed PSPX3 and installed it again. The same thing happened. So I downloaded PSPX4. The same thing happened. Other programs, like Panter 12, still function.
A file seems to be corrupt on my system, that is used by PSP since PSP8.
Vischeck is a color changing tool that simulates various forms of color deficiency. I have used this plugin in previous versions of PSP, but invoking it in X4 causes a crash to desktop (Win7 64 bit).
View 8 Replies View RelatedRecently I have a problem with PaintShop Photo Pro X3. When I want to use the tool text, the screen becomes white and PSP crashes! Over and over again.I have the same problem on the laptop.
View 4 Replies View RelatedAfter almost perfectly working about 1 month long, PSP X6 now crashes in both versions, 32 and 64 bit, right after start. It displays the manager with the pictures from the folder used last time, then the HD is turning some 5-8 seconds more, and then comes the crash.
System: Win 7 64-bit SP1 german
Problem Event: BEX
Module: MSVCR90.DLL
Version: 9.0.30729.6161
It did work until a week ago, when I last time used it before today, since then the only software installed were updates for Adobe Reader and Flash, and the usual Windows defender signatures update, nothing else was changed on the system.
Reinstalling Visual C++ 2008 SP1 32-/64-bit (above DLL seems to be part of it) didn't work, uninstalling and re-installing PSP X6 neither, nor playing around with the DEP settings, as advised by some MS MVPs on the net. PSP X4, still on my machine, does work.
Seems to affect both x64 (my usual use) and x32. During the startup phase (before loading command libraries, etc), the program frequently crashes IF I am not hooked up to the internet. If I am hooked to the internet, it starts OK, and if, after starting, I disconnect from the internet all is OK as well. I presume it may be checking for updates at startup and running into trouble without an internet connection there, and there seems to be no way to turn auto-check feature this off.
Since I can usually hook up to the internet-- using an air card, if naught else-- this isn't a fatal problem for me, but it is an annoying glitch. I mostly want to somehow get this into the Corel system as a bug report.
When I apply the mura copies, PSPX3 crashes.I tried it before updating PSP. I then installed another update, tried mura again, crashed, updated PSP to 13.2.1.20.UAC-never notify.Tried DEP in both settings.FM patcher wouldn't work with it. Tried several versions of mura.
View 8 Replies View RelatedMy Paintshop Pro X4 was working great, until I registered it today, then all hell broke loose. It crashes and also I cannot get the "Computer" tab to open, only the "Desktop" tab will work correctly. Tried restarting it, same results. I use Win XP Pro SP3 and computer does not have virus, nor malware. Hard drive is 500G. Graphics card is updated and more than adequate.
View 2 Replies View RelatedI have migrated to a new PC with Windows7 64-bit. I installed my copy of PSPP X3 and it works fine except for two issues. The File Open dialog always crashes the program when I use it although Drag&Drop and Recent Files work fine.
Another (related) issue is that I cannot use Customize Scripts either.
I was working on a very HI-res image when Paint Shop Pro X4 just quit. It just went away, no errors, nothing.
I can rescan the image, but it was a very large image and took lots of disk space.
Is this scanned in image still on my hard drive? If it is where do I find it, so I can delete it?
I already had a thread about PSP X6 crashing (URL....), but what I finally found now deserves a new thread, because it has nothing to do with MSVCR90.DLL, but with PSP handling the keywords, as it seems now after tests.
PSP was crashing when opened in a certain folder, so I renamed the folder, created a new one, and copied the images from the old renamed one 2-4 pieces at a time. I then opened PSP on the new folder after each copy, and all went well until the last 2 copied images. I then deleted them, copied again each of the 2 images separately, and found the culprit. It was the only image in that folder being tagged with hierarchical IPTC keywords. Moved the image from the folder, copied others into, and all went well again.
Navigated to another folder with older pictures, all tagged hierarchical, and PSP crashed again.Even after deleting the hierarchical keywords from that image, and renaming it didn't work. As soon as PSP founds that image it crashes.
Taking a look into the database: Indeed there is no structure for hierarchical keywords. And this is for me almost a real catastrophe! Both Lightroom 4 and Xnview can handle hierarchical keywords, which are very useful. Because I'm working with these software as much as with PSP, I started to tag my pictures accordingly, about 1200 of them until now, which took hours and hours. Xnview can even nicely create nested categories from the keywords, so it's one click to find all pictures with a given word.
Whenever I try to open jpeg files larger than 2MB PSP 4 crashes.
The files open fine in PSP 3
Is there any way to recover lost data after Paint Shop Pro X4 crashes?
There should at least be an option to save all open documents every x minutes. Where is this option?
I found where PSP saves the temp files and I recovered several of them. Is it possible to use these files to recover my data?
After installing the latest fix/update/patch Paintshop Ultimate X6 crashes continuously. After startup it goes for a minute or so and then crashes. I have uninstalled and reinstalled it without any change. I've emptied the temp directory.
View 4 Replies View RelatedMy version of PS4 that was working fine has stopped working, it crushes at start up. I clean installed the program several times but the result is the same.
View 6 Replies View RelatedI just installed the 12.1 update of After Effects, and now I can't open the program. When I try to start up AE, I get the error message:
After Effects warning: Could not rename the file '/Users/USERNAME/Library/Preferences/Adobe/After Effects/12.1/Workspaces. 773.1407350999826081.xml' to 'workspaces.xml'.
I just tried uninstalling and reinstalling AE. Same problem.
The file in question has rendered perfectly before but client requested a small change just before publication, so we have made the change but when rendering, Photoshop crashes.
I have tried the file on both my 27" iMac i5 with 24gbb ram, and my Macbook Pro Retina i7 with 16gb ram. The only fix I have found is to duplicate all layers to an ALREADY OPEN new file, save as a new name, quit PS then re-open the new file and render.
Here's the original file (53MB download):
[URL].....
I'm facing an issue when I start up the AUTOCAD 2013 on Windows.
I clicked on Autocad icon, and a message is prompted saying "Unknown Property" with a yellow triangle with an exclamation mark inside it, and the software do not start up.
The highlights: Yesterday the software was working normaly when happened a black out. I started the computer again and keep working without any issue. Today when I would keep working on the project I couldn't start up the Autocad.
After installing autocad 2011 on one of our users workstation. we try to launch it and it crashes will opening.
View 9 Replies View RelatedMy computer is running windows 7, 64 bit, and im running no plugins.
View 3 Replies View RelatedI was already having this problem with Max2012 and now it seems to be persisting in Max2013. I am basically getting regluar random crashes. There seems to be no one specific cause, I can be poly-editing, unwrapping even just renaming objects.
However the most common regular cause is simply clicking on the Max start icon on the top left of the screen, to open, save, import or whatever. When this happens as soon as I click on the icon Max closes, doesn't try to save the file and gives no error message. It seems to be more susceptible to doing this after Max has been idling for a while or the PC has been woken from sleep, but not ALWAYS.
My PC is relatively new, graphics cards are updated, motherboard etc. The only thing I haven't updated is the bios.Max SPs' also installed.
Photoshop Elements 8 crashes when trying to start Organizer. Funny, that starting the Photoshop Editor is not a problem and works fine.I reinstalled the software and then installed it again, but had no effect.
View 7 Replies View Related
