Recently I have a problem with PaintShop Photo Pro X3. When I want to use the tool text, the screen becomes white and PSP crashes! Over and over again.I have the same problem on the laptop.
View 4 RepliesI am having an issue with Italian Editor plug-ins. When I click to open an Italian Editor plug-in it is blank, as though it does not see the image. Then ten seconds later the program crashes..
When I first installed this program I had the same issue with Van Der Lee snowflake and the MuRa plug-ins, but managed to sort them out. I am at a loss with the Italian Editor plugins.
PSPX6, both the x32 and the x64 versions crash when trying to open this file. It is a JPG that I found online.
View 5 Replies View RelatedI just got X3 today after using PSP since 2000 or so. but for the life of me I can't find the minimize button anywhere. All I get are tabs, but no minimize options so I can switch between them like I'm used to doing. Also is there a fix to go to the X2 type organizer, instead of having them all show at the bottom?
View 1 Replies View RelatedI have used a program called mp3tag a little bit for music. Any tag editor like this for photos or video? I'm not very familiar with PSP X3, I know it can batch edit photos, but I was thinking that is different.
View 5 Replies View RelatedNature of the problem - If you spend about a minute in the MANAGER tab PSP X6 will crash. I had the same problem with PSP X5.
Properties of your source files (format, file size, where did you get it?) - Any file, mainly Jpegs & TIFFs, original or from the web.
Error Codes -
LevelDate and TimeSourceEvent IDTask Category
Error9/25/2013 4:10:51 AMApplication Error1000(100)"Faulting application name: Corel PaintShop Pro.exe, version: 16.0.0.1, time stamp: 0x51db3b41
Faulting module name: AcLayers.DLL, version: 6.2.9200.16420, time stamp: 0x505aa251
Exception 0xc0000374
Fault offset: 0x0000000000006ad9
Faulting process id: 0x4730
Faulting application start time: 0x01ceb9c6aa155950
Faulting application path: C:Program FilesCorelCorel PaintShop Pro X6 (64-bit)Corel PaintShop Pro.exe
Faulting module path: C:windowsAppPatchAppPatch64AcLayers.DLL
Report Id: fdb46e28-25b9-11e3-bfaf-10604b5e0196
Faulting package full name:
Faulting package-relative application ID: "
PSP X3 crashes when starting up in WinXP Pro. It crashes at "Activating tracker", or something. PSP8 also crashes. I removed PSPX3 and installed it again. The same thing happened. So I downloaded PSPX4. The same thing happened. Other programs, like Panter 12, still function.
A file seems to be corrupt on my system, that is used by PSP since PSP8.
Vischeck is a color changing tool that simulates various forms of color deficiency. I have used this plugin in previous versions of PSP, but invoking it in X4 causes a crash to desktop (Win7 64 bit).
View 8 Replies View RelatedAfter almost perfectly working about 1 month long, PSP X6 now crashes in both versions, 32 and 64 bit, right after start. It displays the manager with the pictures from the folder used last time, then the HD is turning some 5-8 seconds more, and then comes the crash.
System: Win 7 64-bit SP1 german
Problem Event: BEX
Module: MSVCR90.DLL
Version: 9.0.30729.6161
It did work until a week ago, when I last time used it before today, since then the only software installed were updates for Adobe Reader and Flash, and the usual Windows defender signatures update, nothing else was changed on the system.
Reinstalling Visual C++ 2008 SP1 32-/64-bit (above DLL seems to be part of it) didn't work, uninstalling and re-installing PSP X6 neither, nor playing around with the DEP settings, as advised by some MS MVPs on the net. PSP X4, still on my machine, does work.
Seems to affect both x64 (my usual use) and x32. During the startup phase (before loading command libraries, etc), the program frequently crashes IF I am not hooked up to the internet. If I am hooked to the internet, it starts OK, and if, after starting, I disconnect from the internet all is OK as well. I presume it may be checking for updates at startup and running into trouble without an internet connection there, and there seems to be no way to turn auto-check feature this off.
Since I can usually hook up to the internet-- using an air card, if naught else-- this isn't a fatal problem for me, but it is an annoying glitch. I mostly want to somehow get this into the Corel system as a bug report.
When I apply the mura copies, PSPX3 crashes.I tried it before updating PSP. I then installed another update, tried mura again, crashed, updated PSP to 13.2.1.20.UAC-never notify.Tried DEP in both settings.FM patcher wouldn't work with it. Tried several versions of mura.
View 8 Replies View RelatedMy Paintshop Pro X4 was working great, until I registered it today, then all hell broke loose. It crashes and also I cannot get the "Computer" tab to open, only the "Desktop" tab will work correctly. Tried restarting it, same results. I use Win XP Pro SP3 and computer does not have virus, nor malware. Hard drive is 500G. Graphics card is updated and more than adequate.
View 2 Replies View RelatedIf I work in Edit mode all the time I can open as many pictures as I like from the Organizer and have them all open at the same time. If I return to the Organizer and open another image, the ones already open are not affected. However if I go to the Manager tab (which only seems to be the Organizer on a separate page) to select an image I have to close any and all items already open in the editor. Surely this cannot be intended behaviour. In X3 it was possible to open images in the Organizer which was on a separate page and then return to it and open others without the original ones closing so why can't we do this in X4? The Manager does allow multiple images to be selected and opened at the same time but these are still closed if at any time you return to the Manager.
Update: I have now read a few posts about this problem and indeed it is not possible to switch between Edit and Manage modes without closing any images you have open for editing. The general feeling seems to be that this is not a problem as the Organizer (File manager) is available in Edit mode anyway so there is no need to go to the Manage tab. However I would disagree with this as some of my folders contain large numbers of images and it is much easier to browse through them using Manager in thumbnail mode as you can see far more images at once than with the Organizer in Edit mode. Also I find that Organizer gets in the way in Edit mode and would much prefer to switch back and forth to the Manager as was possible in X3.
Even if this problem does not affect everyone it is still difficult to understand why Corel would insist that images in the Editor are closed before switching to Manage mode. I cannot personally think of one reason why this would be preferable. Additionally the Organizer in Edit mode does not appear to have any way of resizing the thumbnails to optimize the number viewable at any one time.
The title just about says it all. I usually edit in Full Editor mode, but normally there is an Explorer-like ribbon running across the bottom, much like the one in Express Lab. I opened PSP ProX3 today and it was gone. I'm guessing it disappeared when i did some editing for my daughter in a non-standard (for me) mode.
How do I get it back? I swear I have hunted and even RTFM'd.
I have migrated to a new PC with Windows7 64-bit. I installed my copy of PSPP X3 and it works fine except for two issues. The File Open dialog always crashes the program when I use it although Drag&Drop and Recent Files work fine.
Another (related) issue is that I cannot use Customize Scripts either.
As some know, it comes on the installation CD of PSPX3.
Quite simply, three seconds after double clicking the program icon, I get this. I'm on the second installation. Patches won't install. I get the message " product that needs to be updated not found" or something similar.
I was working on a very HI-res image when Paint Shop Pro X4 just quit. It just went away, no errors, nothing.
I can rescan the image, but it was a very large image and took lots of disk space.
Is this scanned in image still on my hard drive? If it is where do I find it, so I can delete it?
I installed a new harddrive on my laptop and restored a Ghost image of my old drive onto the new one. Most of the installed software worked right off. Some needed to be re-activated as the software detected a significant hardware change. However, PSP X3 would not start, crashing during loading. The PSP X. splash shows and the loading status gets to "initializing palettes" then Windows reports "Corel Paintshop Pro X3 has stopped working. Windows is checking for a solution...". That's it.
I have un-installed PSP X3 and reloaded from CD. I downloaded the 4 existing patches (1 through 4) and installed them in sequence. I didn't try starting PSP X3 until all the patches were in. Corel.com confirms the activation of the software.
I've used PaintShop since the JASC days and the software works great. However, since about version 9, the software has become more prone to crashing under a variety of circumstances. Now it won't start.
Specs
1.8 GHz laptop
3 GB RAM
500 GB Seagate Momentus XT drive with 4 GB RAM buffer (supposedly a "hybrid" drive)
Windows 7 Pro 64 bit
I already had a thread about PSP X6 crashing (URL....), but what I finally found now deserves a new thread, because it has nothing to do with MSVCR90.DLL, but with PSP handling the keywords, as it seems now after tests.
PSP was crashing when opened in a certain folder, so I renamed the folder, created a new one, and copied the images from the old renamed one 2-4 pieces at a time. I then opened PSP on the new folder after each copy, and all went well until the last 2 copied images. I then deleted them, copied again each of the 2 images separately, and found the culprit. It was the only image in that folder being tagged with hierarchical IPTC keywords. Moved the image from the folder, copied others into, and all went well again.
Navigated to another folder with older pictures, all tagged hierarchical, and PSP crashed again.Even after deleting the hierarchical keywords from that image, and renaming it didn't work. As soon as PSP founds that image it crashes.
Taking a look into the database: Indeed there is no structure for hierarchical keywords. And this is for me almost a real catastrophe! Both Lightroom 4 and Xnview can handle hierarchical keywords, which are very useful. Because I'm working with these software as much as with PSP, I started to tag my pictures accordingly, about 1200 of them until now, which took hours and hours. Xnview can even nicely create nested categories from the keywords, so it's one click to find all pictures with a given word.
Whenever I try to open jpeg files larger than 2MB PSP 4 crashes.
The files open fine in PSP 3
Is there any way to recover lost data after Paint Shop Pro X4 crashes?
There should at least be an option to save all open documents every x minutes. Where is this option?
I found where PSP saves the temp files and I recovered several of them. Is it possible to use these files to recover my data?
After installing the latest fix/update/patch Paintshop Ultimate X6 crashes continuously. After startup it goes for a minute or so and then crashes. I have uninstalled and reinstalled it without any change. I've emptied the temp directory.
View 4 Replies View RelatedI was given a customers title block but there are no defined attributes. I'm using AutoCad Electrical 2010. I have to double click on the title block and the edit block definition box pops up. I select the block to edit and click ok. I would like to use the enhanced attribute editor on these title blocks. Is there a way to define the attributes on this kind of title block using the enhanced attribute editor?
View 9 Replies View RelatedMy gimp text editor is br0ken! I an UNABLE to use the text editor without it crashing Gimp now! it always crashes Gimp when I pull up the editor and hit one letter to type! voila crash!! does this every time I use the text editor now!! every single time!
View 2 Replies View RelatedPSE 9 crashes when entering the editor, returning a note about 'error 1 - need to re-install PSE 9' which unfortunately I can't do because it rolls-back the attempt to uninstall. There must be something blocking the uninstall required before it will re-install the product. Still trying some ideas like installing on another drive on the computer, but to no avail.
View 2 Replies View RelatedA few months ago I bought and downloaded Photoshop Elements 12 from Adobe's website due to my Elements 8 crashing before it opens. For about a month it worked fine, but when I clicked on the logo Elements 12 wouldn't open. I would right-click my images and try to open them in Elements 12 but a window would pop up saying "Photoshop Elements 12 Editor has stopped working" (I use Windows). Using Safe Mode I fixed Elements 12 so that the window appears where I can click between Organizer and Editor. Organizer works fine, but when I click editor the loading bar appears and the "Stopped Working" screen would appear again. how I can use Editor on Elements 12 again?
View 2 Replies View RelatedEvery time I run the editor, the program crashes. The organizer works fine. I have a i7, Win 8.1 16GB RAM and 2GB video memory. Lightroom 5.3 works fine. I have the same problem with the editor of Premiere Elements 12.
View 2 Replies View RelatedI have a problem with a drawing where I'm working with a certain number of blocks.
The other day Autocad crashed repetedlty when entering the block editor. I double-click on the block, the block definition dialogue box opens and the program freezes - I get the error message "Autocad LT has stopped running..."
I tried reopening the drawing, exploded the block and recreated it - problem solved.
Now this is happening again, except when try to explode and recreate the block using the BLOCK command, when the block definition dialogue box open - the program also freezes.
This only happens when I try to edit one particular block in the drawing.
Having problems with the block editor in AutoCAD 2013 LT. I crash everytime I try to open a block in it????
View 9 Replies View RelatedI am having a problem with a new install of photoshop elements 10. It turns out this I now have this problem with elements 9 as well. I tried elements 9 in september and it worked great. I revieved elements 10 as a gift and tried to install it and got the following error. I went back and tried to re-run the trial of elements 9 and I am now getting the same error on 9.
Here is the error I get. After launching the editor, either from the welcome screen or directly from
C:Program Files (x86)AdobePhotoshop Elements 10PhotoshopElementsEditor.exe
I get the following pop up. As you can see the editor does start, but shortly after it starts I get the popup.
I am running on Windows 7 (Pro) 64bit. My video cards are an AMD Radeon HD 6770 and an integrated ATI Radeon HD 4200 with a driver version of 8.920.0, dated 11/9/2011
Here are the error messages from the event viewer
Launch of elements 10 editor:
Faulting application name: PhotoshopElementsEditor.exe, version: 10.0.0.0, time stamp: 0x4e70c16d
[code].....
As I mentioned above, the trial of elements 9 had been working fine. I have made several updates to my system. I can't be 100% certain of the timeline, but I think most were done during the time that I was testing elements 9 and did not break elements 9. i am fairly sure there were a number of updated that were made after my last clean run of elements 9 and before I installed elements 10, namely windows 7 sp1, and various updates, but I was able to install the trial version on a laptop with the same os and same updates.
I just downloaded Elements 11 Editor for mac OSX 10.9, and when I try to use any of the new filters (comic, Graphic Novel, etc), it crashes. What do I do?
View 1 Replies View Related