AutoCAD LT :: 2009 Crashes When Entering Block Editor
Oct 21, 2011
I have a problem with a drawing where I'm working with a certain number of blocks.
The other day Autocad crashed repetedlty when entering the block editor. I double-click on the block, the block definition dialogue box opens and the program freezes - I get the error message "Autocad LT has stopped running..."
I tried reopening the drawing, exploded the block and recreated it - problem solved.
Now this is happening again, except when try to explode and recreate the block using the BLOCK command, when the block definition dialogue box open - the program also freezes.
This only happens when I try to edit one particular block in the drawing.
PSE 9 crashes when entering the editor, returning a note about 'error 1 - need to re-install PSE 9' which unfortunately I can't do because it rolls-back the attempt to uninstall. There must be something blocking the uninstall required before it will re-install the product. Still trying some ideas like installing on another drive on the computer, but to no avail.
Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
I work with a national company that creates criteria drawings for new projects. They recently changed to the 2012 version but they save it down to 2007. There has not been an issue with opening files with my 2009 version until recently. All of the computers in our office are unable to open these new files, although they claim nothing has changed. My CAD will pop up a fatal error and shut down whenever I attempt to open the new files. I downloaded the 2013 trial version and saved the file down to the older version, but that does not work either. Newer versions do not seem to be affected by the files, just my 2009 version. I tried creating a new file in 2013 and saved down to 2007 format. When I try to open it 2009 there is no issue. besides purchasing a new version of AutoCAD?
Whenever I try to enter the print module Windows tells me Lightroom has encountered a problem and needs to close. The print module worked fine some weeks ago, but now it doesn't. Everything else seems to work fine.
First thing I tried was to relaunch and optimize my catalog which didn't work.
I then tried to reinstall LR 2.4 with no luck. I then Downloaded and installed 2.6, still no luck.
I had cleaned the registry after the print module worked last time, so I reloaded the registry with those values, still no luck.
I then deleted Lightroom 2 Preferences.agprefs and let LR relaunch to create a new one. Now the print module works.
As I am not using the default catalog I went into preferences and pointed LR to my catalogue and then relaunched again thinking the problem was solved. But when I tried to go into the Print module LR crashed again.
I figured that since the Print module worked with the empty default catalog the error must lie somewhere in my catalog. I therefore went back and tried using one of my backup catalogs, but LR crashed again when I tried to access the Print module. I even went back and tried all my backup catalogs and a couple of the oldest ones does not cause LR to crash when going into the Print module.
I'm on Vista with 4 gb of RAM, using dual monitors, and I've tried reducing the resolution and using only one screen as well.
So, my question is what could possibly go wrong inside a catalog file that would cause LR to crash in one module only? And why is it that the backups saved even the month before I last used the print module also causes the problem? Seeing as how I've been using that very same catalog and having a working print module?
When going from any module into the Print Module, Lightroom crashes. Another thread suggested using a new catalog without any templates. I did and the application did not crash. Unfortunately, Lightroom is now booting into the print module with the catalog that is causing it to crash. From previous threads it sounds as if the issue was print templates. How do I delete the error causing templates?
My company is useing LDD2009, as well as map. when we make notations in our plans we use a block that is basicly a square with an attribute inside to represent a number, the nuber then corresponds to the same number and a description in a table.
Now, I have been asked to create / recreate (a)the block that would rotate per viewport, also; we are not usin dynamic leaders.
is there a way to either continue with the block or create a dynamic leader that would rotate per viewport, even in other drawings that have xrefs attached like Plan & Profile sheets that are separate drawings.
I'm not sure how autocad would handle the rotating as well as the location of the block and still have the leader point in the same place.
I'm having some trouble in AutoCAD LT 2009 with block files.
I need the blocks I create to be available to every drawing I create, but somehow, I'm doing something wrong because I can only access them from the drawing I created them in.
How do I prevent "Edit Attribute" pop up prompt for entering text for an attribute in a block? I just want the same attribute text each time I insert the block, I don't want the "Edit Attribute" popup window to re-enter the same text every single time.
I do want the attribute text so mirror won't reverse it (I just want permanent attribute text).
First I delete the old regular text.Second I give the block an Attribute Definition Tag and enter the text I want in the Tag blank. Third I center where I want the text. Forth I save the block.
When I finally insert the block I get the "Edit Attribute" pop up to renter what I want it to say. Like I said earlier, I don't want this pop up, I just want to enter the text once and that's it. Also if I enter nothing in the "Edit Attribute" pop up, then no text will show on the block.
I am the only one using C3D 2012 in our office and the other users are complaining that they cannot insert blocks or paste clipboard content into drawings that I have saved from C3D 2012. This is true whether I use "C3D as AutoCAD" or the full C3D functionality. I understand that the newer C3D objects are not compatible with the older version but to my knowledge there are no C3D objects included in the drawings in question.
C3D 2009 users can wblock the drawing contents from the Model tab and each Layout tab, and reassemble those parts. Then they are able to insert blocks and paste content again. It is a very inconvenient solution and we only use it when the situation is critical. It also breaks sheet view linkage to our Sheet Sets when we do the wblock fix.
I've asked the others to try using Design Center or Windows paste (CTRL+V) and see if that works the next time they encounter the problem. I don't have C3D 2009 installed or I would have tested these ideas already. The others will not install C3D 2012 and so far the owner's will not force them to.
I have created a bock in ACAD 2011 LT. I then save the block using the command line or ribbon button then immediately try to close the block editor without moving or changing anything. A dialog appears saying the changes have not been saved to the block and would I like to save? If I say no don't save my changes and reopen the block the changes have in fact been saved.
My question is there a way to get around this dialog box -Suppress it like FILEDIA = 0 for block editor or an option so it doesn't ask me to save.
The goal is to do this all from the command line w/ out dialog boxes.
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
My drawing- block is a little bit complicated, it contains few actions and parameters and everytime i open block editor to add, or to modify some action I can't see my drawing because actions grips and parameters grips obscure my drawing. I tried to refresh layout but it doesn't work.
I was in process of editing a block in "block editor" mode. I saved the dwg and exit instead of saving the block, exit block editor and then exit the dwg. When I opened again the dwg what I see on display is just the block. How to close the block and open the entire dwg?
I'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?
I have several blocks saved as separate .DWGs, some of which are dynamic. I want to review and test these blocks, but I can't find a way to open the existing block definitions in the Block Editor without first inserting the blocks into a drawing.
I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
I am building finished piping assemblies from a collection of smaller parts I have been creating and saving with WBLOCK. I found a mistake on one of my parts(I needed to rotate a piece of pipe). Because the sub-part was part of the complete assembly, I could not rotate the sub-part independently so I opened the block in the block editor. Apparently, and this was my original question, UCS commands do not work in the block editor. The result of this fact was that I could not rotate the sub-assembly in the direction it needed to go. So first question: Can the UCS be moved in the block editor?It focused on exploding blocks that would not explode. I thought if I could simply explode the block back into its component parts, I could rotate the sub-assembly. This is where everything went to hell.
I am not even sure what happened but now I have a new definition of the block that will still not explode, references itself, includes other parts I don't want and is just generally making me PDM. I figure it will be easier to just delete the entire block and redraw the components rather than trying to fix my mess. I did try the undo command but it apparently will not undo the changes to the block definition. Second question: How do I remove all traces of a block saved with BLOCK and WBLOCK so I can start fresh?
Third question: I will not create another block until I learn more about them. Any reference related to intelligent block creation?
I haven't reviewed the recommended posts, but just a quick question. I am in the 'Dynamic Block Editor' command. I am trying to add a stretch application to the block (a simple section flag), and I have success up until the point where I save and go back into the drawing. There I do not get a pull-down tab and it will not allow me to stretch where I have defined the block through the 'Parameters' and 'Actions' tabs.
After I edit a block in the block editor, It regens to a blank black screen. Then I have to zoom extents and zoom back to where the block is. Is this normal? I would think it'd be better if it just put you back to where you were working. I understand the regen probably is necessary to change all the blocks that need to be updated. Just wonder why it puts you to a blank space.
I am currently using Autocad 2011 and my block editor suddenly won't open this morning... I have tried the blockeditlock to open it but nothing happens when I change the setting (0 or 1).
The tube is a part of something bigger but this particular part is confusing me. When I want to change Distance 4 (in block editor you will see) and the tube diameter has change (something impossible in real world ). I have try to use constrains in block editor - for now without any succes.
tube_block2.dwg
P.S. I have tryied mline, it works, but I wonder if it works without mline (I don't like them).
Recently I have a problem with PaintShop Photo Pro X3. When I want to use the tool text, the screen becomes white and PSP crashes! Over and over again.I have the same problem on the laptop.
My gimp text editor is br0ken! I an UNABLE to use the text editor without it crashing Gimp now! it always crashes Gimp when I pull up the editor and hit one letter to type! voila crash!! does this every time I use the text editor now!! every single time!
A few months ago I bought and downloaded Photoshop Elements 12 from Adobe's website due to my Elements 8 crashing before it opens. For about a month it worked fine, but when I clicked on the logo Elements 12 wouldn't open. I would right-click my images and try to open them in Elements 12 but a window would pop up saying "Photoshop Elements 12 Editor has stopped working" (I use Windows). Using Safe Mode I fixed Elements 12 so that the window appears where I can click between Organizer and Editor. Organizer works fine, but when I click editor the loading bar appears and the "Stopped Working" screen would appear again. how I can use Editor on Elements 12 again?
Every time I run the editor, the program crashes. The organizer works fine. I have a i7, Win 8.1 16GB RAM and 2GB video memory. Lightroom 5.3 works fine. I have the same problem with the editor of Premiere Elements 12.
I just installed LT2013 and migratet my settings from LT2008.
Doubleclicking on a blok openes the block editor in LT2008, but not in LT2013.
In LT2008, the main cui file was acadlt.cui. And in this file the "block - double click" action was specified. And it worked in LT2008. I have my own cui-file which not contains any doubleclick-actions.
In LT2013, after migration from LT2008, the mail cui file is now my own cui-file (which not contains any doubleclick actions). Is this why it doesnt work ?
I have tryed to copy a doubleclickaction from acadlt.cui to "my own cui-file". And now it works.
Is this because "my " cui file now is the main cui file ? Why is "my" cui file the main cui file after migration ? is there a way to change, so acadlt.cui becomes the main cui file ?
If not, is there a way to transfer alle settings from acadlt.cui to "my" cui file ? I know i can do this one action of a time in "transfer".
Running 2014 plain Jane. I have the ribbon turned off. Sometimes (a lot) when I double click a block to edit it my Block Editor Toolbar does not come on. And it is not listed in the acad list of tool bars.
