Running 2014 plain Jane. I have the ribbon turned off. Sometimes (a lot) when I double click a block to edit it my Block Editor Toolbar does not come on. And it is not listed in the acad list of tool bars.
View 9 RepliesI am working with 2013 in 2D
Somehow I switched my UCS without noticing from X,Y,X to Z,Y,X. Though the UCS was changed my layout never switched orientation (flat square remained flat square and did not turn into a line).
I was alerted to the error when inserting the blocks. Half of the blocks were showing up as thin lines (in the Z plane) and half where showing up in the X plane.
I was able to correct the UCS by typing UCS, world view, then PLAN, current.
My question now: How can I fix the blocks that where "created" in the Z plane so that they can be inserted into the X plane without having to 'rotate3d' every time I insert a block?
When I close and save my block from the block editor, AutoCAD send me to 0,0. I then have to zoom extents and then zoom back to where I was working from.
View 2 Replies View RelatedI recently discovered that my AutoCAD would become slow, and selection very choppy, after exiting the block editor. Running a purge, audit or regenall does not solve the problem. I have to quit the program and restart. I've also noticed that this has been happening since 2007. It is not my computer, as I am running Windows 7 x64, with AutoCAD 64 bit.
View 2 Replies View RelatedI was trying to edit a dynamic block that made with an earlier version and that had multiple visibility layers and when I would make changes in one visibility layer the change would be in the another layer and poly lines did not have grip points, and insert block would simply disappear. I think there is a serious glitch there.
View 3 Replies View RelatedHaving problems with the block editor in AutoCAD 2013 LT. I crash everytime I try to open a block in it????
View 9 Replies View RelatedWhy the following options are disabled in the block editor.
3drotate
new ucs
visual styles
Where I can find a improved block editor plug-in.
Did Autodesk remove OVERKILL functionality from the block editor?
View 1 Replies View RelatedI installed Autocad 2013 a few weeks ago and I have a lot of blocks made with earlier versions (2008, 2012, etc...) that I need to use. When I try to edit such a block, block editor gives me trouble with visibility states. I can't select visibility states, and when I can, the changes made to that state don't follow and often the program reverts back to the first visibility state for no reason. This is getting to be extremely annoying and I'm thinking of going back to 2012 because of this. Is there a patch or some way to correct this?
View 4 Replies View RelatedControlling the “pickbox size” when working in the “block editor” mode,
I couldn’t know how to increase the size of the pickbox while working in “block editor” mode.
In the regular case, the pickbox size is controlled from the option dialogue box
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
I have created a bock in ACAD 2011 LT. I then save the block using the command line or ribbon button then immediately try to close the block editor without moving or changing anything. A dialog appears saying the changes have not been saved to the block and would I like to save? If I say no don't save my changes and reopen the block the changes have in fact been saved.
My question is there a way to get around this dialog box -Suppress it like FILEDIA = 0 for block editor or an option so it doesn't ask me to save.
The goal is to do this all from the command line w/ out dialog boxes.
Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
My drawing- block is a little bit complicated, it contains few actions and parameters and everytime i open block editor to add, or to modify some action I can't see my drawing because actions grips and parameters grips obscure my drawing. I tried to refresh layout but it doesn't work.
please take a look on attached jpg.
When the block is in a drawing and I click it, it takes me to block editor.
However if I go to it in block editor and test block it allows me to change the attributes.
Why does clicking the block go to block editor and not allow me to change its attributes as it does when I test block.
I want to move the base point of a block in the block editor. However, when I move it, the block moves accordingly in the drawing.
How can i move the base point in the editor, so that the block stays at the same position in the drawing.
I was in process of editing a block in "block editor" mode. I saved the dwg and exit instead of saving the block, exit block editor and then exit the dwg. When I opened again the dwg what I see on display is just the block. How to close the block and open the entire dwg?
View 2 Replies View RelatedI'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?
I have several blocks saved as separate .DWGs, some of which are dynamic. I want to review and test these blocks, but I can't find a way to open the existing block definitions in the Block Editor without first inserting the blocks into a drawing.
View 5 Replies View RelatedI'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View RelatedI was working on a dynamic block and visibility states, but for uknown reason I don't see the visibility drop down on the block editor toolbar.
Is there a way to turn it on. I am using AutoCad 2010.
See the attached file for a screen shot.
How can I get the upper toolbar back?
View 1 Replies View RelatedSometimes on my "Draw" toolbars, all of my icons disappear! Passing the cursor over it, than they reappear! Made same thing in ACAD 2012.
My video card is a NVIDIA Quadro 600 with the latest driver installed.
Win 7 64
16gb RAM
Xeon 3.07
Toolbar macros I've been using for several versions now are not working in LT 2013?
Here an example of one of the macros:
^C^C_select;_auto;\_copy;_p;;@;@;_move;_p;;\_rotate;_p;;@;\_redraw:
I have installed AutoCAD 2013 student on my Laptop (Win7 32Bit) and want to work now.
But I have the problem that my Menubar always freezes / becomes instabil.
-> When I open ACAD, the menu bar is by default on "Home", when I click on the tab "Insert", the tools of "insert" aren't visible, there are still the tools from "Home" shown (Line, Polyline, Circle etc.)
But when I click on these wrong shown tools, the tools of "Insert" become active. (Only the 'surface' doesn't react)
Well, I see always the Home-tools. All the other tools aren't displayed to me, but they work (if u know where they are, you can guess and click and hope you hit the right one )
I am building finished piping assemblies from a collection of smaller parts I have been creating and saving with WBLOCK. I found a mistake on one of my parts(I needed to rotate a piece of pipe). Because the sub-part was part of the complete assembly, I could not rotate the sub-part independently so I opened the block in the block editor. Apparently, and this was my original question, UCS commands do not work in the block editor. The result of this fact was that I could not rotate the sub-assembly in the direction it needed to go. So first question: Can the UCS be moved in the block editor?It focused on exploding blocks that would not explode. I thought if I could simply explode the block back into its component parts, I could rotate the sub-assembly. This is where everything went to hell.
I am not even sure what happened but now I have a new definition of the block that will still not explode, references itself, includes other parts I don't want and is just generally making me PDM. I figure it will be easier to just delete the entire block and redraw the components rather than trying to fix my mess. I did try the undo command but it apparently will not undo the changes to the block definition. Second question: How do I remove all traces of a block saved with BLOCK and WBLOCK so I can start fresh?
Third question: I will not create another block until I learn more about them. Any reference related to intelligent block creation?
I haven't reviewed the recommended posts, but just a quick question. I am in the 'Dynamic Block Editor' command. I am trying to add a stretch application to the block (a simple section flag), and I have success up until the point where I save and go back into the drawing. There I do not get a pull-down tab and it will not allow me to stretch where I have defined the block through the 'Parameters' and 'Actions' tabs.
View 1 Replies View RelatedAfter I edit a block in the block editor, It regens to a blank black screen. Then I have to zoom extents and zoom back to where the block is. Is this normal? I would think it'd be better if it just put you back to where you were working. I understand the regen probably is necessary to change all the blocks that need to be updated. Just wonder why it puts you to a blank space.
View 7 Replies View RelatedI am currently using Autocad 2011 and my block editor suddenly won't open this morning... I have tried the blockeditlock to open it but nothing happens when I change the setting (0 or 1).
View 9 Replies View RelatedThe tube is a part of something bigger but this particular part is confusing me. When I want to change Distance 4 (in block editor you will see) and the tube diameter has change (something impossible in real world ). I have try to use constrains in block editor - for now without any succes.
tube_block2.dwg
P.S. I have tryied mline, it works, but I wonder if it works without mline (I don't like them).
I just switched from Autocad 2007 to 2013. how to display the object snap toolbar? the one with center snap, mid-point snap, etc options?
View 3 Replies View Related